openwrt_lede/package/boot/uboot-ar71xx/patches/040-no_extern_inline.patch

--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -118,12 +118,12 @@ static inline void set_io_port_base(unsi
  * Change virtual addresses to physical addresses and vv.
  * These are trivial on the 1:1 Linux/MIPS mapping
  */
-extern inline phys_addr_t virt_to_phys(volatile void * address)
+static inline phys_addr_t virt_to_phys(volatile void * address)
 {
 	return CPHYSADDR(address);
 }
 
-extern inline void * phys_to_virt(unsigned long address)
+static inline void * phys_to_virt(unsigned long address)
 {
 	return (void *)KSEG0ADDR(address);
 }
@@ -131,12 +131,12 @@ extern inline void * phys_to_virt(unsign
 /*
  * IO bus memory addresses are also 1:1 with the physical address
  */
-extern inline unsigned long virt_to_bus(volatile void * address)
+static inline unsigned long virt_to_bus(volatile void * address)
 {
 	return CPHYSADDR(address);
 }
 
-extern inline void * bus_to_virt(unsigned long address)
+static inline void * bus_to_virt(unsigned long address)
 {
 	return (void *)KSEG0ADDR(address);
 }
@@ -150,12 +150,12 @@ extern unsigned long isa_slot_offset;
 extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
 
 #if 0
-extern inline void *ioremap(unsigned long offset, unsigned long size)
+static inline void *ioremap(unsigned long offset, unsigned long size)
 {
 	return __ioremap(offset, size, _CACHE_UNCACHED);
 }
 
-extern inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
 {
 	return __ioremap(offset, size, _CACHE_UNCACHED);
 }
@@ -238,7 +238,7 @@ out:
  */
 
 #define __OUT1(s) \
-extern inline void __out##s(unsigned int value, unsigned int port) {
+static inline void __out##s(unsigned int value, unsigned int port) {
 
 #define __OUT2(m) \
 __asm__ __volatile__ ("s" #m "\t%0,%1(%2)"
@@ -252,7 +252,7 @@ __OUT1(s##c_p) __OUT2(m) : : "r" (__iosw
 	SLOW_DOWN_IO; }
 
 #define __IN1(t,s) \
-extern __inline__ t __in##s(unsigned int port) { t _v;
+static inline t __in##s(unsigned int port) { t _v;
 
 /*
  * Required nops will be inserted by the assembler
@@ -267,7 +267,7 @@ __IN1(t,s##_p) __IN2(m) : "=r" (_v) : "i
 __IN1(t,s##c_p) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); SLOW_DOWN_IO; return __ioswab##w(_v); }
 
 #define __INS1(s) \
-extern inline void __ins##s(unsigned int port, void * addr, unsigned long count) {
+static inline void __ins##s(unsigned int port, void * addr, unsigned long count) {
 
 #define __INS2(m) \
 if (count) \
@@ -295,7 +295,7 @@ __INS1(s##c) __INS2(m) \
 	: "$1");}
 
 #define __OUTS1(s) \
-extern inline void __outs##s(unsigned int port, const void * addr, unsigned long count) {
+static inline void __outs##s(unsigned int port, const void * addr, unsigned long count) {
 
 #define __OUTS2(m) \
 if (count) \
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -23,7 +23,7 @@
 #include <linux/kernel.h>
 #endif
 
-extern __inline__ void
+static inline void
 __sti(void)
 {
 	__asm__ __volatile__(
@@ -47,7 +47,7 @@ __sti(void)
  * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
  * no nops at all.
  */
-extern __inline__ void
+static inline void
 __cli(void)
 {
 	__asm__ __volatile__(
@@ -208,7 +208,7 @@ do { \
  * For 32 and 64 bit operands we can take advantage of ll and sc.
  * FIXME: This doesn't work for R3000 machines.
  */
-extern __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
+static inline unsigned long xchg_u32(volatile int * m, unsigned long val)
 {
 #ifdef CONFIG_CPU_HAS_LLSC
 	unsigned long dummy;