From 46856fabe40cc80f92134683cdec7dc0fc8f4000 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 3 May 2016 19:15:58 +0200 Subject: [PATCH] watchdog: sp5100_tco: properly check for new register layouts Commits 190aa4304de6 (Add AMD Mullins platform support) and cca118fa2a0a94 (Add AMD Carrizo platform support) enabled the driver on a lot more devices, but the following commit missed a single location in the code when checking if the SB800 register offsets should be used. This leads to the wrong register being written which in turn causes ACPI to go haywire. Fix this by introducing a helper function to check for the new register layout and use this consistently. https://bugzilla.kernel.org/show_bug.cgi?id=114201 https://bugzilla.redhat.com/show_bug.cgi?id=1329910 Fixes: bdecfcdb5461 (sp5100_tco: fix the device check for SB800 and later chipsets) Cc: stable@vger.kernel.org (4.5+) Signed-off-by: Lucas Stach Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sp5100_tco.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -73,6 +73,13 @@ MODULE_PARM_DESC(nowayout, "Watchdog can /* * Some TCO specific functions */ + +static bool tco_has_sp5100_reg_layout(struct pci_dev *dev) +{ + return dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && + dev->revision < 0x40; +} + static void tco_timer_start(void) { u32 val; @@ -129,7 +136,7 @@ static void tco_timer_enable(void) { int val; - if (sp5100_tco_pci->revision >= 0x40) { + if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) { /* For SB800 or later */ /* Set the Watchdog timer resolution to 1 sec */ outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG); @@ -342,8 +349,7 @@ static unsigned char sp5100_tco_setupdev /* * Determine type of southbridge chipset. */ - if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && - sp5100_tco_pci->revision < 0x40) { + if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) { dev_name = SP5100_DEVNAME; index_reg = SP5100_IO_PM_INDEX_REG; data_reg = SP5100_IO_PM_DATA_REG; @@ -388,8 +394,7 @@ static unsigned char sp5100_tco_setupdev * Secondly, Find the watchdog timer MMIO address * from SBResource_MMIO register. */ - if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && - sp5100_tco_pci->revision < 0x40) { + if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) { /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */ pci_read_config_dword(sp5100_tco_pci, SP5100_SB_RESOURCE_MMIO_BASE, &val);