From 4d5621372f6e7ddbfd5879602f82073987bcc722 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Sep 2015 09:57:10 +0100 Subject: [PATCH 709/744] phy: move fixed_phy MII register generation to a library Move the fixed_phy MII register generation to a library to allow other software phy implementations to use this code. Reviewed-by: Florian Fainelli Signed-off-by: Russell King --- drivers/net/phy/Kconfig | 4 ++ drivers/net/phy/Makefile | 3 +- drivers/net/phy/fixed_phy.c | 95 ++------------------------------- drivers/net/phy/swphy.c | 126 ++++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/swphy.h | 8 +++ 5 files changed, 143 insertions(+), 93 deletions(-) create mode 100644 drivers/net/phy/swphy.c create mode 100644 drivers/net/phy/swphy.h --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -26,6 +26,9 @@ config SWCONFIG_LEDS bool "Switch LED trigger support" depends on (SWCONFIG && LEDS_TRIGGERS) +config SWPHY + bool + comment "MII PHY device drivers" config AQUANTIA_PHY @@ -205,6 +208,7 @@ config RTL8306_PHY config FIXED_PHY tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB + select SWPHY ---help--- Adds the platform "fixed" MDIO Bus to cover the boards that use PHYs that are not connected to the real MDIO bus. --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -1,6 +1,7 @@ # Makefile for Linux PHY drivers -libphy-objs := phy.o phy_device.o mdio_bus.o +libphy-y := phy.o phy_device.o mdio_bus.o +libphy-$(CONFIG_SWPHY) += swphy.o obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -24,6 +24,8 @@ #include #include +#include "swphy.h" + #define MII_REGS_NUM 29 struct fixed_mdio_bus { @@ -49,101 +51,10 @@ static struct fixed_mdio_bus platform_fm static int fixed_phy_update_regs(struct fixed_phy *fp) { - u16 bmsr = BMSR_ANEGCAPABLE; - u16 bmcr = 0; - u16 lpagb = 0; - u16 lpa = 0; - if (gpio_is_valid(fp->link_gpio)) fp->status.link = !!gpio_get_value_cansleep(fp->link_gpio); - if (fp->status.duplex) { - switch (fp->status.speed) { - case 1000: - bmsr |= BMSR_ESTATEN; - break; - case 100: - bmsr |= BMSR_100FULL; - break; - case 10: - bmsr |= BMSR_10FULL; - break; - default: - break; - } - } else { - switch (fp->status.speed) { - case 1000: - bmsr |= BMSR_ESTATEN; - break; - case 100: - bmsr |= BMSR_100HALF; - break; - case 10: - bmsr |= BMSR_10HALF; - break; - default: - break; - } - } - - if (fp->status.link) { - bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE; - - if (fp->status.duplex) { - bmcr |= BMCR_FULLDPLX; - - switch (fp->status.speed) { - case 1000: - bmcr |= BMCR_SPEED1000; - lpagb |= LPA_1000FULL; - break; - case 100: - bmcr |= BMCR_SPEED100; - lpa |= LPA_100FULL; - break; - case 10: - lpa |= LPA_10FULL; - break; - default: - pr_warn("fixed phy: unknown speed\n"); - return -EINVAL; - } - } else { - switch (fp->status.speed) { - case 1000: - bmcr |= BMCR_SPEED1000; - lpagb |= LPA_1000HALF; - break; - case 100: - bmcr |= BMCR_SPEED100; - lpa |= LPA_100HALF; - break; - case 10: - lpa |= LPA_10HALF; - break; - default: - pr_warn("fixed phy: unknown speed\n"); - return -EINVAL; - } - } - - if (fp->status.pause) - lpa |= LPA_PAUSE_CAP; - - if (fp->status.asym_pause) - lpa |= LPA_PAUSE_ASYM; - } - - fp->regs[MII_PHYSID1] = 0; - fp->regs[MII_PHYSID2] = 0; - - fp->regs[MII_BMSR] = bmsr; - fp->regs[MII_BMCR] = bmcr; - fp->regs[MII_LPA] = lpa; - fp->regs[MII_STAT1000] = lpagb; - - return 0; + return swphy_update_regs(fp->regs, &fp->status); } static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num) --- /dev/null +++ b/drivers/net/phy/swphy.c @@ -0,0 +1,126 @@ +/* + * Software PHY emulation + * + * Code taken from fixed_phy.c by Russell King + * + * Author: Vitaly Bordug + * Anton Vorontsov + * + * Copyright (c) 2006-2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include + +#include "swphy.h" + +/** + * swphy_update_regs - update MII register array with fixed phy state + * @regs: array of 32 registers to update + * @state: fixed phy status + * + * Update the array of MII registers with the fixed phy link, speed, + * duplex and pause mode settings. + */ +int swphy_update_regs(u16 *regs, const struct fixed_phy_status *state) +{ + u16 bmsr = BMSR_ANEGCAPABLE; + u16 bmcr = 0; + u16 lpagb = 0; + u16 lpa = 0; + + if (state->duplex) { + switch (state->speed) { + case 1000: + bmsr |= BMSR_ESTATEN; + break; + case 100: + bmsr |= BMSR_100FULL; + break; + case 10: + bmsr |= BMSR_10FULL; + break; + default: + break; + } + } else { + switch (state->speed) { + case 1000: + bmsr |= BMSR_ESTATEN; + break; + case 100: + bmsr |= BMSR_100HALF; + break; + case 10: + bmsr |= BMSR_10HALF; + break; + default: + break; + } + } + + if (state->link) { + bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE; + + if (state->duplex) { + bmcr |= BMCR_FULLDPLX; + + switch (state->speed) { + case 1000: + bmcr |= BMCR_SPEED1000; + lpagb |= LPA_1000FULL; + break; + case 100: + bmcr |= BMCR_SPEED100; + lpa |= LPA_100FULL; + break; + case 10: + lpa |= LPA_10FULL; + break; + default: + pr_warn("swphy: unknown speed\n"); + return -EINVAL; + } + } else { + switch (state->speed) { + case 1000: + bmcr |= BMCR_SPEED1000; + lpagb |= LPA_1000HALF; + break; + case 100: + bmcr |= BMCR_SPEED100; + lpa |= LPA_100HALF; + break; + case 10: + lpa |= LPA_10HALF; + break; + default: + pr_warn("swphy: unknown speed\n"); + return -EINVAL; + } + } + + if (state->pause) + lpa |= LPA_PAUSE_CAP; + + if (state->asym_pause) + lpa |= LPA_PAUSE_ASYM; + } + + regs[MII_PHYSID1] = 0; + regs[MII_PHYSID2] = 0; + + regs[MII_BMSR] = bmsr; + regs[MII_BMCR] = bmcr; + regs[MII_LPA] = lpa; + regs[MII_STAT1000] = lpagb; + + return 0; +} +EXPORT_SYMBOL_GPL(swphy_update_regs); --- /dev/null +++ b/drivers/net/phy/swphy.h @@ -0,0 +1,8 @@ +#ifndef SWPHY_H +#define SWPHY_H + +struct fixed_phy_status; + +int swphy_update_regs(u16 *regs, const struct fixed_phy_status *state); + +#endif