From 0109238d62a99ea779a7e28e21868118e7b8d69d Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Mon, 10 Apr 2017 14:28:14 +0200 Subject: [PATCH 1/2] rt2800: fix LNA gain assignment for MT7620 To: Stanislaw Gruszka Cc: Helmut Schaa , linux-wireless@vger.kernel.org, Kalle Valo The base value used for MT7620 differs from Rt5392 which resulted in quite bad RX signal quality. Fix this by using the correct base value as well as the LNA calibration values for HT20. Reported-by: Tom Psyborg Signed-off-by: Daniel Golle --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index ba06ac2d876d..7135519a638c 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -3806,11 +3806,25 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, } if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) { + reg = 0x10; + if (!conf_is_ht40(conf)) { + if (rt2x00_rt(rt2x00dev, RT6352) && + rt2x00_has_cap_external_lna_bg(rt2x00dev)) { + reg |= 0x5; + } else { + reg |= 0xa; + } + } rt2800_bbp_write(rt2x00dev, 195, 141); - rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a); + rt2800_bbp_write(rt2x00dev, 196, reg); /* AGC init */ - reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2 * rt2x00dev->lna_gain; + if (rt2x00_rt(rt2x00dev, RT6352)) + reg = 0x04; + else + reg = rf->channel <= 14 ? 0x1c : 0x24; + + reg += 2 * rt2x00dev->lna_gain; rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); rt2800_iq_calibrate(rt2x00dev, rf->channel); -- 2.12.2