0044-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch 8.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240
  1. --- /dev/null
  2. +++ b/board/arcadyan/arv8539pw22/Makefile
  3. @@ -0,0 +1,28 @@
  4. +#
  5. +# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
  6. +#
  7. +# SPDX-License-Identifier: GPL-2.0+
  8. +#
  9. +
  10. +include $(TOPDIR)/config.mk
  11. +
  12. +LIB = $(obj)lib$(BOARD).o
  13. +
  14. +COBJS = $(BOARD).o
  15. +
  16. +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
  17. +OBJS := $(addprefix $(obj),$(COBJS))
  18. +SOBJS := $(addprefix $(obj),$(SOBJS))
  19. +
  20. +$(LIB): $(obj).depend $(OBJS) $(SOBJS)
  21. + $(call cmd_link_o_target, $(OBJS) $(SOBJS))
  22. +
  23. +#########################################################################
  24. +
  25. +# defines $(obj).depend target
  26. +include $(SRCTREE)/rules.mk
  27. +
  28. +sinclude $(obj).depend
  29. +
  30. +#########################################################################
  31. +
  32. --- /dev/null
  33. +++ b/board/arcadyan/arv8539pw22/arv8539pw22.c
  34. @@ -0,0 +1,53 @@
  35. +/*
  36. + * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
  37. + * Copyright (C) 2013 Oliver Muth <dr.o.muth@gmx.de>
  38. + *
  39. + * SPDX-License-Identifier: GPL-2.0+
  40. + */
  41. +
  42. +#include <common.h>
  43. +#include <switch.h>
  44. +#include <asm/gpio.h>
  45. +#include <asm/lantiq/eth.h>
  46. +#include <asm/lantiq/reset.h>
  47. +#include <asm/lantiq/chipid.h>
  48. +
  49. +int board_early_init_f(void)
  50. +{
  51. + return 0;
  52. +}
  53. +
  54. +int checkboard(void)
  55. +{
  56. + puts("Board: " CONFIG_BOARD_NAME "\n");
  57. + ltq_chip_print_info();
  58. +
  59. + return 0;
  60. +}
  61. +
  62. +static const struct ltq_eth_port_config eth_port_config[] = {
  63. + /* MAC0: Atheros ar8216 switch */
  64. + { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_MII },
  65. +};
  66. +
  67. +static const struct ltq_eth_board_config eth_board_config = {
  68. + .ports = eth_port_config,
  69. + .num_ports = ARRAY_SIZE(eth_port_config),
  70. +};
  71. +
  72. +int board_eth_init(bd_t *bis)
  73. +{
  74. + return ltq_eth_initialize(&eth_board_config);
  75. +}
  76. +
  77. +static struct switch_device ar8216_dev = {
  78. + .name = "ar8216",
  79. + .cpu_port = 0,
  80. + .port_mask = 0xF,
  81. +};
  82. +
  83. +int board_switch_init(void)
  84. +{
  85. + return switch_device_register(&ar8216_dev);
  86. +}
  87. +
  88. --- /dev/null
  89. +++ b/board/arcadyan/arv8539pw22/config.mk
  90. @@ -0,0 +1,8 @@
  91. +#
  92. +# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
  93. +#
  94. +# SPDX-License-Identifier: GPL-2.0+
  95. +#
  96. +
  97. +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
  98. +
  99. --- /dev/null
  100. +++ b/board/arcadyan/arv8539pw22/ddr_settings.h
  101. @@ -0,0 +1,55 @@
  102. +/*
  103. + * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
  104. + *
  105. + * This file has been generated with lantiq_ram_extract_magic.awk script.
  106. + *
  107. + * SPDX-License-Identifier: GPL-2.0+
  108. + */
  109. +
  110. +#define MC_DC00_VALUE 0x1B1B
  111. +#define MC_DC01_VALUE 0x0
  112. +#define MC_DC02_VALUE 0x0
  113. +#define MC_DC03_VALUE 0x0
  114. +#define MC_DC04_VALUE 0x0
  115. +#define MC_DC05_VALUE 0x200
  116. +#define MC_DC06_VALUE 0x605
  117. +#define MC_DC07_VALUE 0x303
  118. +#define MC_DC08_VALUE 0x102
  119. +#define MC_DC09_VALUE 0x70A
  120. +#define MC_DC10_VALUE 0x203
  121. +#define MC_DC11_VALUE 0xC02
  122. +#define MC_DC12_VALUE 0x1C8
  123. +#define MC_DC13_VALUE 0x1
  124. +#define MC_DC14_VALUE 0x0
  125. +#define MC_DC15_VALUE 0x134
  126. +#define MC_DC16_VALUE 0xC800
  127. +#define MC_DC17_VALUE 0xD
  128. +#define MC_DC18_VALUE 0x301
  129. +#define MC_DC19_VALUE 0x200
  130. +#define MC_DC20_VALUE 0xA03
  131. +#define MC_DC21_VALUE 0x1400
  132. +#define MC_DC22_VALUE 0x1414
  133. +#define MC_DC23_VALUE 0x0
  134. +#define MC_DC24_VALUE 0x5B
  135. +#define MC_DC25_VALUE 0x0
  136. +#define MC_DC26_VALUE 0x0
  137. +#define MC_DC27_VALUE 0x0
  138. +#define MC_DC28_VALUE 0x510
  139. +#define MC_DC29_VALUE 0x4E20
  140. +#define MC_DC30_VALUE 0x8235
  141. +#define MC_DC31_VALUE 0x0
  142. +#define MC_DC32_VALUE 0x0
  143. +#define MC_DC33_VALUE 0x0
  144. +#define MC_DC34_VALUE 0x0
  145. +#define MC_DC35_VALUE 0x0
  146. +#define MC_DC36_VALUE 0x0
  147. +#define MC_DC37_VALUE 0x0
  148. +#define MC_DC38_VALUE 0x0
  149. +#define MC_DC39_VALUE 0x0
  150. +#define MC_DC40_VALUE 0x0
  151. +#define MC_DC41_VALUE 0x0
  152. +#define MC_DC42_VALUE 0x0
  153. +#define MC_DC43_VALUE 0x0
  154. +#define MC_DC44_VALUE 0x0
  155. +#define MC_DC45_VALUE 0x500
  156. +#define MC_DC46_VALUE 0x0
  157. --- a/boards.cfg
  158. +++ b/boards.cfg
  159. @@ -553,6 +553,9 @@ Active mips mips32 danube arcadyan arv752dpw
  160. Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_brn arv752dpw22:SYS_BOOT_BRN -
  161. Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_nor arv752dpw22:SYS_BOOT_NOR -
  162. Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_ram arv752dpw22:SYS_BOOT_RAM -
  163. +Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_brn arv8539pw22:SYS_BOOT_BRN -
  164. +Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_nor arv8539pw22:SYS_BOOT_NOR -
  165. +Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_ram arv8539pw22:SYS_BOOT_RAM -
  166. Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle@gmail.com>
  167. Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle@gmail.com>
  168. Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
  169. --- /dev/null
  170. +++ b/include/configs/arv8539pw22.h
  171. @@ -0,0 +1,68 @@
  172. +/*
  173. + * Copyright (C) 2012-2013 Luka Perkov <luka@openwrt.org>
  174. + *
  175. + * SPDX-License-Identifier: GPL-2.0+
  176. + */
  177. +
  178. +#ifndef __CONFIG_H
  179. +#define __CONFIG_H
  180. +
  181. +#define CONFIG_MACH_TYPE "ARV8539PW22"
  182. +#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
  183. +#define CONFIG_BOARD_NAME "Speedport W 504V Typ A"
  184. +
  185. +/* Configure SoC */
  186. +#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
  187. +
  188. +#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
  189. +
  190. +#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
  191. +
  192. +/* Switch devices */
  193. +#define CONFIG_SWITCH_MULTI
  194. +#define CONFIG_SWITCH_AR8216
  195. +
  196. +/* Environment */
  197. +#if defined(CONFIG_SYS_BOOT_NOR)
  198. +#define CONFIG_ENV_IS_IN_FLASH
  199. +#define CONFIG_ENV_OVERWRITE
  200. +#define CONFIG_ENV_OFFSET (192 * 1024)
  201. +#define CONFIG_ENV_SECT_SIZE (64 * 1024)
  202. +#else
  203. +#define CONFIG_ENV_IS_NOWHERE
  204. +#endif
  205. +
  206. +#define CONFIG_ENV_SIZE (8 * 1024)
  207. +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
  208. +
  209. +/* Burnboot loadable image */
  210. +#if defined(CONFIG_SYS_BOOT_BRN)
  211. +#define CONFIG_SYS_TEXT_BASE 0x80002000
  212. +#define CONFIG_SKIP_LOWLEVEL_INIT
  213. +#define CONFIG_SYS_DISABLE_CACHE
  214. +#define CONFIG_ENV_OVERWRITE 1
  215. +#endif
  216. +
  217. +
  218. +/* Console */
  219. +#define CONFIG_LTQ_ADVANCED_CONSOLE
  220. +#define CONFIG_BAUDRATE 115200
  221. +#define CONFIG_CONSOLE_ASC 1
  222. +#define CONFIG_CONSOLE_DEV "ttyS1"
  223. +
  224. +/* Pull in default board configs for Lantiq XWAY Danube */
  225. +#include <asm/lantiq/config.h>
  226. +#include <asm/arch/config.h>
  227. +
  228. +/* Pull in default OpenWrt configs for Lantiq SoC */
  229. +#include "openwrt-lantiq-common.h"
  230. +
  231. +#define CONFIG_ENV_UPDATE_UBOOT_NOR \
  232. + "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
  233. +
  234. +#define CONFIG_EXTRA_ENV_SETTINGS \
  235. + CONFIG_ENV_LANTIQ_DEFAULTS \
  236. + CONFIG_ENV_UPDATE_UBOOT_NOR \
  237. + "kernel_addr=0xB0040000\0"
  238. +
  239. +#endif /* __CONFIG_H */