| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546 |
- --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
- +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
- @@ -540,6 +540,27 @@ static struct board_info __initdata boar
- .force_duplex_full = 1,
- },
- };
- +
- +// Actually this board is the very same as the rta770bw,
- +// where the additional 'b' within the name just
- +// just indicates 'Annex B'. The ADSL Modem itself is able
- +// to handle both Annex A as well as Annex B -
- +// the loaded firmware makes the only difference
- +static struct board_info __initdata board_rta770w = {
- + .name = "RTA770W",
- + .expected_cpu_id = 0x6345,
- +
- + .has_uart0 = 1,
- +
- + .has_enet0 = 1,
- +
- + .enet0 = {
- + .has_phy = 1,
- + .phy_id = 0,
- + .force_speed_100 = 1,
- + .force_duplex_full = 1,
- + },
- +};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
-
- /*
- @@ -1791,6 +1812,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6345
- &board_96345gw2,
- &board_rta770bw,
- + &board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- &board_96348r,
- @@ -1865,6 +1887,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6345
- { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
- { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
- + { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
|
