| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546 |
- --- a/drivers/pcmcia/yenta_socket.c
- +++ b/drivers/pcmcia/yenta_socket.c
- @@ -919,6 +919,8 @@ static unsigned int yenta_probe_irq(stru
- * Probe for usable interrupts using the force
- * register to generate bogus card status events.
- */
- +#ifndef CONFIG_BCM47XX
- + /* WRT54G3G does not like this */
- cb_writel(socket, CB_SOCKET_EVENT, -1);
- cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- reg = exca_readb(socket, I365_CSCINT);
- @@ -934,6 +936,7 @@ static unsigned int yenta_probe_irq(stru
- }
- cb_writel(socket, CB_SOCKET_MASK, 0);
- exca_writeb(socket, I365_CSCINT, reg);
- +#endif
-
- mask = probe_irq_mask(val) & 0xffff;
-
- @@ -1018,6 +1021,10 @@ static void yenta_get_socket_capabilitie
- else
- socket->socket.irq_mask = 0;
-
- + /* irq mask probing is broken for the WRT54G3G */
- + if (socket->socket.irq_mask == 0)
- + socket->socket.irq_mask = 0x6f8;
- +
- dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
- }
- @@ -1250,6 +1257,15 @@ static int yenta_probe(struct pci_dev *d
- dev_info(&dev->dev, "Socket status: %08x\n",
- cb_readl(socket, CB_SOCKET_STATE));
-
- + /* Generate an interrupt on card insert/remove */
- + config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
- +
- + /* Set up Multifunction Routing Status Register */
- + config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
- +
- + /* Switch interrupts to parallelized */
- + config_writeb(socket, 0x92, 0x64);
- +
- yenta_fixup_parent_bridge(dev->subordinate);
-
- /* Register it with the pcmcia layer.. */
|
