| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172 |
- From b90794bb85c90b4276fea302cf75251021134e7a Mon Sep 17 00:00:00 2001
- From: Eric Anholt <eric@anholt.net>
- Date: Fri, 12 Feb 2016 14:15:14 -0800
- Subject: [PATCH 288/381] drm/vc4: Bring HDMI up from power off if necessary.
- If the firmware hadn't brought up HDMI for us, we need to do its
- power-on reset sequence (reset HD and and clear its STANDBY bits,
- reset HDMI, and leave the PHY disabled).
- Signed-off-by: Eric Anholt <eric@anholt.net>
- (cherry picked from commit 851479ad5927b7b1aa141ca9dedb897a7bce2b1d)
- ---
- drivers/gpu/drm/vc4/vc4_hdmi.c | 29 ++++++++++++++++++++++++++++-
- drivers/gpu/drm/vc4/vc4_regs.h | 2 ++
- 2 files changed, 30 insertions(+), 1 deletion(-)
- --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
- +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
- @@ -497,6 +497,16 @@ static int vc4_hdmi_bind(struct device *
- goto err_put_i2c;
- }
-
- + /* This is the rate that is set by the firmware. The number
- + * needs to be a bit higher than the pixel clock rate
- + * (generally 148.5Mhz).
- + */
- + ret = clk_set_rate(hdmi->hsm_clock, 163682864);
- + if (ret) {
- + DRM_ERROR("Failed to set HSM clock rate: %d\n", ret);
- + goto err_unprepare_pix;
- + }
- +
- ret = clk_prepare_enable(hdmi->hsm_clock);
- if (ret) {
- DRM_ERROR("Failed to turn on HDMI state machine clock: %d\n",
- @@ -518,7 +528,24 @@ static int vc4_hdmi_bind(struct device *
- vc4->hdmi = hdmi;
-
- /* HDMI core must be enabled. */
- - WARN_ON_ONCE((HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE) == 0);
- + if (!(HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE)) {
- + HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST);
- + udelay(1);
- + HD_WRITE(VC4_HD_M_CTL, 0);
- +
- + HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_ENABLE);
- +
- + HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL,
- + VC4_HDMI_SW_RESET_HDMI |
- + VC4_HDMI_SW_RESET_FORMAT_DETECT);
- +
- + HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, 0);
- +
- + /* PHY should be in reset, like
- + * vc4_hdmi_encoder_disable() does.
- + */
- + HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16);
- + }
-
- drm_encoder_init(drm, hdmi->encoder, &vc4_hdmi_encoder_funcs,
- DRM_MODE_ENCODER_TMDS);
- --- a/drivers/gpu/drm/vc4/vc4_regs.h
- +++ b/drivers/gpu/drm/vc4/vc4_regs.h
- @@ -456,6 +456,8 @@
- #define VC4_HDMI_TX_PHY_RESET_CTL 0x2c0
-
- #define VC4_HD_M_CTL 0x00c
- +# define VC4_HD_M_REGISTER_FILE_STANDBY (3 << 6)
- +# define VC4_HD_M_RAM_STANDBY (3 << 4)
- # define VC4_HD_M_SW_RST BIT(2)
- # define VC4_HD_M_ENABLE BIT(0)
-
|
