| 12345678910111213141516171819202122232425 |
- DR1 miner parameters description:
- --dr1-cutoff-temp Set DR1 overheat cut off temperature (default: 45)
- --drl-cutoff-fan Set DR1 too slow cut off fanspeed (default: 0)
- --dr1-fan Set fanspeed percentage for DR1, single value or range (default: LV3 )(LV1/LV2/LV3)
- --dr1-clk Set frequency for DR1, (default: 200) 200/250/300/400
- --dr1-asic-x Set asic x num (default:10)
- --dr1-asic-y Set asic y num (default:6)
- --dr1-check-testnonce Set DR1 check nonce before submit to server
- --dr1-scan-serial|-S [# Direct serial I/O, manual port specification (Linux)--dr1-scan-serial /dev/ttyUSB0 --dr1-scan-serial /dev/ttyUSB1 (Windows) --dr1-scan-serial //./COM5]
- [# Direct serial I/O, auto-detect ports (Linux only)--dr1-scan-serial dr1:auto]
- --du1 Just for miniusb mining,if set minidr will auto ignore --dr1-asic-x --dr1-asic-y --dr1-cutoff-temp --drl-cutoff-fan
-
- Linux DEPENDENCIES :
- curl dev library
- (sudo apt-get install libcurl4-openssl-dev)
- curses dev library
- (sudo apt-get install libncurses5-dev)
- Usage:
- ./cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x --dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0
- USB Usage:
- ./cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x --dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0 --du1
|
