/* * Copyright 2013 Con Kolivas * Copyright 2013 Andrew Smith * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 3 of the License, or (at your option) * any later version. See COPYING for more details. */ #ifndef BFLSC_H #define BFLSC_H #define BLANK "" #define LFSTR "" /* * Firmware * DRV_V2 expects (beyond V1) the GetInfo to return the chip count * The queues are 40 instead of 20 and are *usually* consumed and filled * in bursts due to e.g. a 16 chip device doing 16 items at a time and * returning 16 results at a time * If the device has varying chip speeds, it will gradually break up the * burst of results as we progress */ enum driver_version { BFLSC_DRVUNDEF = 0, BFLSC_DRV1, BFLSC_DRV2 }; /* * With Firmware 1.0.0 and a result queue of 20 the Max is: * inprocess = 12 * max count = 9 * 64+1+24+1+1+(1+8)*8+1 per line = 164 * 20 * OK = 3 * Total: 3304 * * With Firmware 1.2.* and a result queue of 40 but a limit of 15 replies: * inprocess = 12 * max count = 9 * 64+1+24+1+1+1+1+(1+8)*8+1 per line = 166 * 15 * OK = 3 * Total: 2514 * */ #define BFLSC_BUFSIZ (0x1000) // Should be big enough #define BFLSC_APPLOGSIZ 8192 #define BFLSC_INFO_TIMEOUT 999 #define BFLSC_DI_FIRMWARE "FIRMWARE" #define BFLSC_DI_ENGINES "ENGINES" #define BFLSC_DI_JOBSINQUE "JOBS IN QUEUE" #define BFLSC_DI_XLINKMODE "XLINK MODE" #define BFLSC_DI_XLINKPRESENT "XLINK PRESENT" #define BFLSC_DI_DEVICESINCHAIN "DEVICES IN CHAIN" #define BFLSC_DI_CHAINPRESENCE "CHAIN PRESENCE MASK" #define BFLSC_DI_CHIPS "CHIP PARALLELIZATION" #define BFLSC_DI_CHIPS_PARALLEL "YES" #define FULLNONCE 0x100000000ULL struct bflsc_dev { // Work unsigned int ms_work; int work_queued; int work_complete; int nonces_hw; // TODO: this - need to add a paramter to submit_nonce() // so can pass 'dev' to hw_error uint64_t hashes_unsent; uint64_t hashes_sent; uint64_t nonces_found; struct timeval last_check_result; struct timeval last_dev_result; // array > 0 struct timeval last_nonce_result; // > 0 nonce // Info char getinfo[(BFLSC_BUFSIZ+4)*4]; char *firmware; int engines; // each engine represents a 'thread' in a chip char *xlink_mode; char *xlink_present; char *chips; // Status bool dead; // TODO: handle seperate x-link devices failing? bool overheat; // Stats float temp1; float temp2; float vcc1; float vcc2; float vmain; float temp1_max; float temp2_max; time_t temp1_max_time; time_t temp2_max_time; float temp1_5min_av; // TODO: float temp2_5min_av; // TODO: // To handle the fact that flushing the queue may not remove all work // (normally one item is still being processed) // and also that once the queue is flushed, results may still be in // the output queue - but we don't want to process them at the time of doing an LP // when result_id > flush_id+1, flushed work can be discarded since it // is no longer in the device uint64_t flush_id; // counter when results were last flushed uint64_t result_id; // counter when results were last checked bool flushed; // are any flushed? }; #define QUE_MAX_RESULTS 8 struct bflsc_info { enum driver_version driver_version; pthread_rwlock_t stat_lock; struct thr_info results_thr; uint64_t hashes_sent; uint32_t update_count; struct timeval last_update; int sc_count; struct bflsc_dev *sc_devs; unsigned int scan_sleep_time; unsigned int results_sleep_time; unsigned int default_ms_work; bool shutdown; bool flash_led; bool not_first_work; // allow ignoring the first nonce error bool fanauto; int que_size; int que_full_enough; int que_watermark; int que_low; int que_noncecount; int que_fld_min; int que_fld_max; int core_nonces[17]; int core_hw[17]; int flush_size; // count of given size, [+2] is for any > QUE_MAX_RESULTS uint64_t result_size[QUE_MAX_RESULTS+2]; }; #define BFLSC_XLINKHDR '@' #define BFLSC_MAXPAYLOAD 255 struct DataForwardToChain { uint8_t header; uint8_t payloadSize; uint8_t deviceAddress; uint8_t payloadData[BFLSC_MAXPAYLOAD]; }; #define DATAFORWARDSIZE(data) (1 + 1 + 1 + data.payloadSize) #define MIDSTATE_BYTES 32 #define MERKLE_OFFSET 64 #define MERKLE_BYTES 12 #define BFLSC_QJOBSIZ (MIDSTATE_BYTES+MERKLE_BYTES+1) #define BFLSC_EOB 0xaa struct QueueJobStructure { uint8_t payloadSize; uint8_t midState[MIDSTATE_BYTES]; uint8_t blockData[MERKLE_BYTES]; uint8_t endOfBlock; }; #define QUE_RES_LINES_MIN 3 #define QUE_MIDSTATE 0 #define QUE_BLOCKDATA 1 #define QUE_NONCECOUNT_V1 2 #define QUE_FLD_MIN_V1 3 #define QUE_FLD_MAX_V1 (QUE_MAX_RESULTS+QUE_FLD_MIN_V1) #define QUE_CHIP_V2 2 #define QUE_NONCECOUNT_V2 3 #define QUE_FLD_MIN_V2 4 #define QUE_FLD_MAX_V2 (QUE_MAX_RESULTS+QUE_FLD_MIN_V2) #define BFLSC_SIGNATURE 0xc1 #define BFLSC_EOW 0xfe // N.B. this will only work with 5 jobs // requires a different jobs[N] for each job count // but really only need to handle 5 anyway struct QueueJobPackStructure { uint8_t payloadSize; uint8_t signature; uint8_t jobsInArray; struct QueueJobStructure jobs[5]; uint8_t endOfWrapper; }; // TODO: Implement in API and also in usb device selection struct SaveString { uint8_t payloadSize; uint8_t payloadData[BFLSC_MAXPAYLOAD]; }; // Commands (Single Stage) #define BFLSC_IDENTIFY "ZGX" #define BFLSC_IDENTIFY_LEN (sizeof(BFLSC_IDENTIFY)-1) #define BFLSC_DETAILS "ZCX" #define BFLSC_DETAILS_LEN (sizeof(BFLSC_DETAILS)-1) #define BFLSC_FIRMWARE "ZJX" #define BFLSC_FIRMWARE_LEN (sizeof(BFLSC_FIRMWARE)-1) #define BFLSC_FLASH "ZMX" #define BFLSC_FLASH_LEN (sizeof(BFLSC_FLASH)-1) #define BFLSC_VOLTAGE "ZTX" #define BFLSC_VOLTAGE_LEN (sizeof(BFLSC_VOLTAGE)-1) #define BFLSC_TEMPERATURE "ZLX" #define BFLSC_TEMPERATURE_LEN (sizeof(BFLSC_TEMPERATURE)-1) #define BFLSC_QRES "ZOX" #define BFLSC_QRES_LEN (sizeof(BFLSC_QRES)-1) #define BFLSC_QFLUSH "ZQX" #define BFLSC_QFLUSH_LEN (sizeof(BFLSC_QFLUSH)-1) #define BFLSC_FANAUTO "Z9X" #define BFLSC_FANOUT_LEN (sizeof(BFLSC_FANAUTO)-1) #define BFLSC_FAN0 "Z0X" #define BFLSC_FAN0_LEN (sizeof(BFLSC_FAN0)-1) #define BFLSC_FAN1 "Z1X" #define BFLSC_FAN1_LEN (sizeof(BFLSC_FAN1)-1) #define BFLSC_FAN2 "Z2X" #define BFLSC_FAN2_LEN (sizeof(BFLSC_FAN2)-1) #define BFLSC_FAN3 "Z3X" #define BFLSC_FAN3_LEN (sizeof(BFLSC_FAN3)-1) #define BFLSC_FAN4 "Z4X" #define BFLSC_FAN4_LEN (sizeof(BFLSC_FAN4)-1) #define BFLSC_LOADSTR "ZUX" #define BFLSC_LOADSTR_LEN (sizeof(BFLSC_LOADSTR)-1) // Commands (Dual Stage) #define BFLSC_QJOB "ZNX" #define BFLSC_QJOB_LEN (sizeof(BFLSC_QJOB)-1) #define BFLSC_QJOBS "ZWX" #define BFLSC_QJOBS_LEN (sizeof(BFLSC_QJOBS)-1) #define BFLSC_SAVESTR "ZSX" #define BFLSC_SAVESTR_LEN (sizeof(BFLSC_SAVESTR)-1) // Replies #define BFLSC_IDENTITY "BitFORCE SC" #define BFLSC_BFLSC "SHA256 SC" #define BFLSC_OK "OK\n" #define BFLSC_OK_LEN (sizeof(BFLSC_OK)-1) #define BFLSC_SUCCESS "SUCCESS\n" #define BFLSC_SUCCESS_LEN (sizeof(BFLSC_SUCCESS)-1) #define BFLSC_RESULT "COUNT:" #define BFLSC_RESULT_LEN (sizeof(BFLSC_RESULT)-1) #define BFLSC_ANERR "ERR:" #define BFLSC_ANERR_LEN (sizeof(BFLSC_ANERR)-1) #define BFLSC_TIMEOUT BFLSC_ANERR "TIMEOUT" #define BFLSC_TIMEOUT_LEN (sizeof(BFLSC_TIMEOUT)-1) // x-link timeout has a space (a number follows) #define BFLSC_XTIMEOUT BFLSC_ANERR "TIMEOUT " #define BFLSC_XTIMEOUT_LEN (sizeof(BFLSC_XTIMEOUT)-1) #define BFLSC_INVALID BFLSC_ANERR "INVALID DATA" #define BFLSC_INVALID_LEN (sizeof(BFLSC_INVALID)-1) #define BFLSC_ERRSIG BFLSC_ANERR "SIGNATURE" #define BFLSC_ERRSIG_LEN (sizeof(BFLSC_ERRSIG)-1) #define BFLSC_OKQ "OK:QUEUED" #define BFLSC_OKQ_LEN (sizeof(BFLSC_OKQ)-1) #define BFLSC_INPROCESS "INPROCESS" #define BFLSC_INPROCESS_LEN (sizeof(BFLSC_INPROCESS)-1) // Followed by N=1..5 #define BFLSC_OKQN "OK:QUEUED " #define BFLSC_OKQN_LEN (sizeof(BFLSC_OKQN)-1) #define BFLSC_QFULL "QUEUE FULL" #define BFLSC_QFULL_LEN (sizeof(BFLSC_QFULL)-1) #define BFLSC_HITEMP "HIGH TEMPERATURE RECOVERY" #define BFLSC_HITEMP_LEN (sizeof(BFLSC_HITEMP)-1) #define BFLSC_EMPTYSTR "MEMORY EMPTY" #define BFLSC_EMPTYSTR_LEN (sizeof(BFLSC_EMPTYSTR)-1) // Queued and non-queued are the same #define FullNonceRangeJob QueueJobStructure #define BFLSC_JOBSIZ BFLSC_QJOBSIZ // Non queued commands (not used) #define BFLSC_SENDWORK "ZDX" #define BFLSC_SENDWORK_LEN (sizeof(BFLSC_SENDWORK)-1) #define BFLSC_WORKSTATUS "ZFX" #define BFLSC_WORKSTATUS_LEN (sizeof(BFLSC_WORKSTATUS)-1) #define BFLSC_SENDRANGE "ZPX" #define BFLSC_SENDRANGE_LEN (sizeof(BFLSC_SENDRANGE)-1) // Non queued work replies (not used) #define BFLSC_NONCE "NONCE-FOUND:" #define BFLSC_NONCE_LEN (sizeof(BFLSC_NONCE)-1) #define BFLSC_NO_NONCE "NO-NONCE" #define BFLSC_NO_NONCE_LEN (sizeof(BFLSC_NO_NONCE)-1) #define BFLSC_IDLE "IDLE" #define BFLSC_IDLE_LEN (sizeof(BFLSC_IDLE)-1) #define BFLSC_BUSY "BUSY" #define BFLSC_BUSY_LEN (sizeof(BFLSC_BUSY)-1) #define BFLSC_MINIRIG "BAM" #define BFLSC_SINGLE "BAS" #define BFLSC_LITTLESINGLE "BAL" #define BFLSC_JALAPENO "BAJ" // Default expected time for a nonce range // - thus no need to check until this + last time work was found // 60GH/s MiniRig (1 board) or Single #define BAM_WORK_TIME 71.58 #define BAS_WORK_TIME 71.58 // 30GH/s Little Single #define BAL_WORK_TIME 143.17 // 4.5GH/s Jalapeno #define BAJ_WORK_TIME 954.44 // Defaults (slightly over half the work time) but ensure none are above 100 // SCAN_TIME - delay after sending work // RES_TIME - delay between checking for results #define BAM_SCAN_TIME 20 #define BAS_SCAN_TIME 360 #define BAL_SCAN_TIME 720 #define BAJ_SCAN_TIME 1000 #define BFLSC_RES_TIME 100 #define BFLSC_MAX_SLEEP 2000 #define BAJ_LATENCY LATENCY_STD #define BAL_LATENCY 12 #define BAS_LATENCY 12 // For now a BAM doesn't really exist - it's currently 8 independent BASs #define BAM_LATENCY 2 #define BFLSC_TEMP_SLEEPMS 5 #define BFLSC_QUE_SIZE_V1 20 #define BFLSC_QUE_FULL_ENOUGH_V1 13 #define BFLSC_QUE_WATERMARK_V1 6 #define BFLSC_QUE_LOW_V1 3 // TODO: use 5 batch jobs // TODO: base these numbers on the chip count? #define BFLSC_QUE_SIZE_V2 40 #define BFLSC_QUE_FULL_ENOUGH_V2 36 #define BFLSC_QUE_WATERMARK_V2 32 #define BFLSC_QUE_LOW_V2 16 #define BFLSC_TEMP_OVERHEAT 85 // Will start throttling this much below overheat #define BFLSC_TEMP_THROTTLE 3 // Must drop this far below overheat before resuming work #define BFLSC_TEMP_RECOVER 5 // If initialisation fails the first time, // sleep this amount (ms) and try again #define REINIT_TIME_FIRST_MS 100 // Max ms per sleep #define REINIT_TIME_MAX_MS 800 // Keep trying up to this many us #define REINIT_TIME_MAX 3000000 int opt_bflsc_overheat; #endif /* BFLSC_H */