# Makefile.in generated by automake 1.11.1 from Makefile.am. # compat/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/cgminer pkgincludedir = $(includedir)/cgminer pkglibdir = $(libdir)/cgminer pkglibexecdir = $(libexecdir)/cgminer am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i686-pc-mingw32 host_triplet = i686-pc-mingw32 target_triplet = i686-pc-mingw32 am__append_1 = libusb-1.0 subdir = compat DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \ $(top_srcdir)/m4/extensions.m4 \ $(top_srcdir)/m4/gnulib-common.m4 \ $(top_srcdir)/m4/gnulib-comp.m4 \ $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/memchr.m4 \ $(top_srcdir)/m4/memmem.m4 $(top_srcdir)/m4/mmap-anon.m4 \ $(top_srcdir)/m4/multiarch.m4 $(top_srcdir)/m4/onceonly.m4 \ $(top_srcdir)/m4/sigaction.m4 $(top_srcdir)/m4/signal_h.m4 \ $(top_srcdir)/m4/signalblocking.m4 \ $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdint.m4 \ $(top_srcdir)/m4/string_h.m4 $(top_srcdir)/m4/warn-on-use.m4 \ $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = jansson-2.5 libusb-1.0 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = ${SHELL} /home/cross/code/missing --run aclocal-1.11 ALLOCA = AMTAR = ${SHELL} /home/cross/code/missing --run tar AM_DEFAULT_VERBOSITY = 0 APPLE_UNIVERSAL_BUILD = 0 AR = ar AUTOCONF = ${SHELL} /home/cross/code/missing --run autoconf AUTOHEADER = ${SHELL} /home/cross/code/missing --run autoheader AUTOMAKE = ${SHELL} /home/cross/code/missing --run automake-1.11 AWK = gawk BITSIZEOF_PTRDIFF_T = BITSIZEOF_SIG_ATOMIC_T = BITSIZEOF_SIZE_T = BITSIZEOF_WCHAR_T = BITSIZEOF_WINT_T = CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -g -O2 CPP = gcc -E CPPFLAGS = CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = dlltool DLOPEN_FLAGS = DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = .exe FGREP = /bin/grep -F GNULIB_MBSCASECMP = 0 GNULIB_MBSCASESTR = 0 GNULIB_MBSCHR = 0 GNULIB_MBSCSPN = 0 GNULIB_MBSLEN = 0 GNULIB_MBSNCASECMP = 0 GNULIB_MBSNLEN = 0 GNULIB_MBSPBRK = 0 GNULIB_MBSPCASECMP = 0 GNULIB_MBSRCHR = 0 GNULIB_MBSSEP = 0 GNULIB_MBSSPN = 0 GNULIB_MBSSTR = 0 GNULIB_MBSTOK_R = 0 GNULIB_MEMCHR = 1 GNULIB_MEMMEM = 1 GNULIB_MEMPCPY = 0 GNULIB_MEMRCHR = 0 GNULIB_RAWMEMCHR = 0 GNULIB_SIGACTION = 1 GNULIB_SIGNAL_H_SIGPIPE = 0 GNULIB_SIGPROCMASK = 1 GNULIB_STPCPY = 0 GNULIB_STPNCPY = 0 GNULIB_STRCASESTR = 0 GNULIB_STRCHRNUL = 0 GNULIB_STRDUP = 0 GNULIB_STRERROR = 0 GNULIB_STRERROR_R = 0 GNULIB_STRNCAT = 0 GNULIB_STRNDUP = 0 GNULIB_STRNLEN = 0 GNULIB_STRPBRK = 0 GNULIB_STRSEP = 0 GNULIB_STRSIGNAL = 0 GNULIB_STRSTR = 0 GNULIB_STRTOK_R = 0 GNULIB_STRVERSCMP = 0 GREP = /bin/grep HAVE_DECL_MEMMEM = 0 HAVE_DECL_MEMRCHR = 1 HAVE_DECL_STRDUP = 1 HAVE_DECL_STRERROR_R = 1 HAVE_DECL_STRNDUP = 1 HAVE_DECL_STRNLEN = 1 HAVE_DECL_STRSIGNAL = 1 HAVE_DECL_STRTOK_R = 1 HAVE_INTTYPES_H = 1 HAVE_LONG_LONG_INT = 1 HAVE_MBSLEN = 0 HAVE_MEMCHR = 1 HAVE_MEMPCPY = 1 HAVE_POSIX_SIGNALBLOCKING = 0 HAVE_RAWMEMCHR = 1 HAVE_SIGACTION = 0 HAVE_SIGHANDLER_T = 0 HAVE_SIGINFO_T = 0 HAVE_SIGNED_SIG_ATOMIC_T = HAVE_SIGNED_WCHAR_T = HAVE_SIGNED_WINT_T = HAVE_SIGSET_T = 1 HAVE_STDINT_H = 1 HAVE_STPCPY = 1 HAVE_STPNCPY = 1 HAVE_STRCASESTR = 1 HAVE_STRCHRNUL = 1 HAVE_STRPBRK = 1 HAVE_STRSEP = 1 HAVE_STRUCT_SIGACTION_SA_SIGACTION = 1 HAVE_STRVERSCMP = 1 HAVE_SYS_BITYPES_H = HAVE_SYS_INTTYPES_H = HAVE_SYS_TYPES_H = 1 HAVE_TYPE_VOLATILE_SIG_ATOMIC_T = 1 HAVE_UNSIGNED_LONG_LONG_INT = 1 HAVE_WCHAR_H = 1 HAVE_WCHAR_T = 1 INCLUDE_NEXT = include_next INCLUDE_NEXT_AS_FIRST_DIRECTIVE = include_next INSTALL = /bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s JANSSON_LIBS = compat/jansson-2.5/src/.libs/libjansson.a LD = c:/mingw/mingw32/bin/ld.exe LDFLAGS = LIBCURL_CFLAGS = @CPPFLAG_CURL_STATICLIB@ -IC:/MinGW/include LIBCURL_LIBS = -LC:/MinGW/lib -lcurl -lcurldll LIBGNU_LIBDEPS = LIBGNU_LTLIBDEPS = LIBOBJS = LIBS = -lpdcurses -lpthread LIBTOOL = $(SHELL) $(top_builddir)/libtool LIBUDEV_LIBS = LIBUSB_CFLAGS = LIBUSB_LIBS = compat/libusb-1.0/libusb/.libs/libusb-1.0.a LIPO = LN_S = cp -p LTLIBOBJS = MAINT = # MAKEINFO = ${SHELL} /home/cross/code/missing --run makeinfo MANIFEST_TOOL = : MATH_LIBS = -lm MKDIR_P = /bin/mkdir -p MM_LIBS = -lwinmm NCURSES_LIBS = NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H = NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = NEXT_AS_FIRST_DIRECTIVE_STDINT_H = NEXT_AS_FIRST_DIRECTIVE_STRING_H = NEXT_SIGNAL_H = NEXT_STDDEF_H = NEXT_STDINT_H = NEXT_STRING_H = NM = /mingw/bin/nm NMEDIT = OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = cgminer PACKAGE_BUGREPORT = kernel@kolivas.org PACKAGE_NAME = cgminer PACKAGE_STRING = cgminer 4.3.5-scrypt.2 PACKAGE_TARNAME = cgminer PACKAGE_URL = PACKAGE_VERSION = 4.3.5-scrypt.2 PATH_SEPARATOR = : PDCURSES_LIBS = PKG_CONFIG = /mingw/bin/pkg-config PKG_CONFIG_LIBDIR = PKG_CONFIG_PATH = PRAGMA_COLUMNS = PRAGMA_SYSTEM_HEADER = #pragma GCC system_header PTHREAD_FLAGS = PTHREAD_LIBS = -lpthread PTRDIFF_T_SUFFIX = RANLIB = ranlib REPLACE_MEMCHR = 0 REPLACE_MEMMEM = 0 REPLACE_NULL = 0 REPLACE_STPNCPY = 0 REPLACE_STRCASESTR = 0 REPLACE_STRCHRNUL = 0 REPLACE_STRDUP = 0 REPLACE_STRERROR = 0 REPLACE_STRERROR_R = 0 REPLACE_STRNCAT = 0 REPLACE_STRNDUP = 0 REPLACE_STRNLEN = 0 REPLACE_STRSIGNAL = 0 REPLACE_STRSTR = 0 REPLACE_STRTOK_R = 0 RT_LIBS = SED = /bin/sed SET_MAKE = SHELL = /bin/sh SIG_ATOMIC_T_SUFFIX = SIZE_T_SUFFIX = STDDEF_H = STDINT_H = STRIP = strip UNDEFINE_STRTOK_R = 0 VERSION = 4.3.5-scrypt.2 VMAJ = 4 WCHAR_T_SUFFIX = WINT_T_SUFFIX = WS2_LIBS = -lws2_32 abs_builddir = /home/cross/code/compat abs_srcdir = /home/cross/code/compat abs_top_builddir = /home/cross/code abs_top_srcdir = /home/cross/code ac_ct_AR = ar ac_ct_CC = gcc ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = i686-pc-mingw32 build_alias = build_cpu = i686 build_os = mingw32 build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} gl_LIBOBJS = memmem.o sigaction.o sigprocmask.o gl_LTLIBOBJS = memmem.lo sigaction.lo sigprocmask.lo gltests_LIBOBJS = gltests_LTLIBOBJS = gltests_WITNESS = IN_CGMINER_GNULIB_TESTS host = i686-pc-mingw32 host_alias = host_cpu = i686 host_os = mingw32 host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /home/cross/code/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr/local program_transform_name = s,x,x, psdir = ${docdir} release_info = sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . subdirs = compat/libusb-1.0 compat/jansson-2.5 sysconfdir = ${prefix}/etc target = i686-pc-mingw32 target_alias = target_cpu = i686 target_os = mingw32 target_vendor = pc top_build_prefix = ../ top_builddir = .. top_srcdir = .. version_info = 7:5:3 SUBDIRS = jansson-2.5 $(am__append_1) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign compat/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign compat/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: