Home Explore Help
Register Sign In
wareck
/
lede_packages
1
0
Fork 0
Files Issues 0 Pull Requests 0 Wiki
Branch: master
Branches Tags
lede_packages
/
net
/
apcupsd
/
files
/
multimon.conf

multimon.conf 2.3 KB
Permalink History Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263 
  1. # Sample multimon configuration file
    2. 

  2. #
    3. 

  3. # This file is not required.  Without it, multimon will use the default
    4. 

  4. # field layout.
    5. 

  5. #
    6. 

  6. # Temperature selection
    7. 

  7. # 
    8. 

  8. # Pick "TEMPC" for Celsius or "TEMPF" for Fahrenheit.  This will override
    9. 

  9. # the --enable-celsius setting from the compile.  UPSTEMP (below) will 
    10. 

  10. # use this setting by default.
    11. 

  11. 

  12. TEMPC
    13. 

  13. 

  14. # Format:
    15. 

  15. # FIELD <variable> "<field name>" "<field suffix>"
    16. 

  16. #
    17. 

  17. # <variable> is either a word from the UPS protocol like battchg (see the
    18. 

  18. # table in src/cgi/upsfetch.c) or a special word in uppercase.  
    19. 

  19. #
    20. 

  20. # Special words are:
    21. 

  21. # MODEL    - Show the model name for this system in cyan
    22. 

  22. #
    23. 

  23. # STATUS   - Parse the status for this system using the appropriate color
    24. 

  24. #
    25. 

  25. # UPSTEMP and AMBTEMP use the default scale.  This is set to C if you use
    26. 

  26. # --enable-celsius at compile time *or* if you use "TEMPC" above.
    27. 

  27. #
    28. 

  28. # UPSTEMP  - Show the UPS temperature in the default scale (suffix ignored)
    29. 

  29. # AMBTEMP  - Show the ambient temperature in the default scale (suffix ignored)
    30. 

  30. #
    31. 

  31. # UPSTEMPC - Show the UPS temperature in degrees C (suffix ignored)
    32. 

  32. # UPSTEMPF - Show the UPS temperature in degrees F (suffix ignored)
    33. 

  33. # AMBTEMPC - Show the ambient temperature in degrees C (suffix ignored)
    34. 

  34. # AMBTEMPF - Show the ambient temperature in degrees F (suffix ignored)
    35. 

  35. # 
    36. 

  36. # They're called "special" since they actually understand the content
    37. 

  37. # being printed and do other things based on what's in there.
    38. 

  38. # 
    39. 

  39. # <field name> is what you'd like this column to be called on the page.
    40. 

  40. # Remember that this is HTML, so you can actually embed markup in here.
    41. 

  41. # This means you can even include images here.  You can include quotes
    42. 

  42. # (and backslashes!) in the string by escaping them with a backslash (\).
    43. 

  43. # 
    44. 

  44. # <field suffix> is typically something like % or VAC.  It's useful if
    45. 

  45. # you want to convey the units that apply to a value.
    46. 

  46. #
    47. 

  47. # Example config
    48. 

  48. 

  49. FIELD SYSTEM "System" ""
    50. 

  50. FIELD MODEL "Model" ""
    51. 

  51. FIELD STATUS "Status" ""
    52. 

  52. FIELD battpct "Battery Chg" "%"
    53. 

  53. FIELD utility "Utility" "VAC"
    54. 

  54. FIELD loadpct "UPS Load" "%"
    55. 

  55. FIELD UPSTEMP "UPS Temp" ""
    56. 

  56. FIELD runtime "Batt. Run Time" "min."
    57. 

  57. FIELD DATA   "Data" "All data"
    58. 

  58. 

  59. # These are only useful if you have a Smart-UPS model with the Measure-UPS II
    60. 

  60. # measurement card.  No other models presently support these features.
    61. 

  61. # 
    62. 

  62. # FIELD AMBTEMP "Ambient Temp" ""
    63. 

  63. # FIELD HUMIDITY "Ambient Humidity" "%"
    64.