############################################################################
# NOTE: Do not modify this file to configure ocserv. Add new directives    #
# in /etc/ocserv/ocserv.conf.local and these will be included in ocserv's  #
# configuration                                                            #
############################################################################


# User authentication method. Could be set multiple times and in that case
# all should succeed.
# Options: certificate, pam. 
#auth = "certificate"
#auth = "pam"

# The gid-min option is used by auto-select-group option, in order to
# select the minimum group ID.
#auth = "pam[gid-min=1000]"

# The plain option requires specifying a password file which contains
# entries of the following format.
# "username:groupname:encoded-password"
# One entry must be listed per line, and 'ocpasswd' can be used
# to generate password entries.
auth = "|AUTH|"

# A banner to be displayed on clients
banner = "Welcome to OpenWRT"

#isolate-workers = true

# When the server has a dynamic DNS address (that may change),
# should set that to true to ask the client to resolve again on
# reconnects.
listen-host-is-dyndns = |DYNDNS|

# Use listen-host to limit to specific IPs or to the IPs of a provided 
# hostname.
#listen-host = [IP|HOSTNAME]

# Limit the number of clients. Unset or set to zero for unlimited.
#max-clients = 1024
max-clients = |MAX_CLIENTS|

# Limit the number of client connections to one every X milliseconds 
# (X is the provided value). Set to zero for no limit.
rate-limit-ms = 100

# Limit the number of identical clients (i.e., users connecting 
# multiple times). Unset or set to zero for unlimited.
max-same-clients = |MAX_SAME|

# TCP and UDP port number
tcp-port = |PORT|
|UDP|udp-port = |PORT|

# Stats report time. The number of seconds after which each
# worker process will report its usage statistics (number of
# bytes transferred etc). This is useful when accounting like
# radius is in use.
#stats-report-time = 360

# Stats reset time. The period of time statistics kept by main/sec-mod
# processes will be reset. These are the statistics shown by cmd
# 'occtl show stats'. For daily: 86400, weekly: 604800
# This is unrelated to stats-report-time.
server-stats-reset-time = 604800

# Keepalive in seconds
keepalive = 32400

# Dead peer detection in seconds.
dpd = |DPD|

# Dead peer detection for mobile clients. The needs to
# be much higher to prevent such clients being awaken too 
# often by the DPD messages, and save battery.
# (clients that send the X-AnyConnect-Identifier-DeviceType)
mobile-dpd = 1800

# If using DTLS, and no UDP traffic is received for this
# many seconds, attempt to send future traffic over the TCP
# connection instead, in an attempt to wake up the client
# in the case that there is a NAT and the UDP translation
# was deleted. If this is unset, do not attempt to use this
# recovery mechanism.
switch-to-tcp-timeout = 25

# MTU discovery (DPD must be enabled)
try-mtu-discovery = false

# The key and the certificates of the server
# The key may be a file, or any URL supported by GnuTLS (e.g., 
# tpmkey:uuid=xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx;storage=user
# or pkcs11:object=my-vpn-key;object-type=private)
#
# There may be multiple certificate and key pairs and each key
# should correspond to the preceding certificate.
server-cert = /etc/ocserv/server-cert.pem
server-key = /etc/ocserv/server-key.pem

# Diffie-Hellman parameters. Only needed if you require support
# for the DHE ciphersuites (by default this server supports ECDHE).
# Can be generated using:
# certtool --generate-dh-params --outfile /path/to/dh.pem
#dh-params = /path/to/dh.pem

# If you have a certificate from a CA that provides an OCSP
# service you may provide a fresh OCSP status response within
# the TLS handshake. That will prevent the client from connecting
# independently on the OCSP server.
# You can update this response periodically using:
# ocsptool --ask --load-cert=your_cert --load-issuer=your_ca --outfile response
# Make sure that you replace the following file in an atomic way.
#ocsp-response = /path/to/ocsp.der

# In case PKCS #11 or TPM keys are used the PINs should be available
# in files. The srk-pin-file is applicable to TPM keys only, and is the 
# storage root key.
#pin-file = /path/to/pin.txt
#srk-pin-file = /path/to/srkpin.txt

# The Certificate Authority that will be used to verify
# client certificates (public keys) if certificate authentication
# is set.
#ca-cert = /etc/ocserv/ca.pem

# The object identifier that will be used to read the user ID in the client 
# certificate. The object identifier should be part of the certificate's DN
# Useful OIDs are: 
#  CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1
#cert-user-oid = 0.9.2342.19200300.100.1.1

# The object identifier that will be used to read the user group in the 
# client  certificate. The object identifier should be part of the certificate's
# DN. Useful OIDs are: 
#  OU (organizational unit) = 2.5.4.11 
#cert-group-oid = 2.5.4.11

# The revocation list of the certificates issued by the 'ca-cert' above.
#crl = /etc/ocserv/crl.pem

# Uncomment this to enable compression negotiation (LZS, LZ4).
|COMPRESSION|compression = true

# GnuTLS priority string
tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-VERS-SSL3.0"

# To enforce perfect forward secrecy (PFS) on the main channel.
#tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-VERS-SSL3.0:-RSA"

# The time (in seconds) that a client is allowed to stay connected prior
# to authentication
auth-timeout = 240

# The time (in seconds) that a client is allowed to stay idle (no traffic)
# before being disconnected. Unset to disable.
#idle-timeout = 1200

# The time (in seconds) that a mobile client is allowed to stay idle (no
# traffic) before being disconnected. Unset to disable.
#mobile-idle-timeout = 2400

# The time (in seconds) that a client is not allowed to reconnect after 
# a failed authentication attempt.
min-reauth-time = 360

# Banning clients in ocserv works with a point system. IP addresses
# that get a score over that configured number are banned for
# min-reauth-time seconds. By default a wrong password attempt is 10 points,
# a KKDCP POST is 1 point, and a connection is 1 point. Note that
# due to difference processes being involved the count of points
# will not be real-time precise.
#
# Score banning cannot be reliably used when receiving proxied connections
# locally from an HTTP server (i.e., when listen-clear-file is used).
#
# Set to zero to disable.
max-ban-score = 80

# The time (in seconds) that all score kept for a client is reset.
ban-reset-time = 1200

# In case you'd like to change the default points.
#ban-points-wrong-password = 10
#ban-points-connection = 1
#ban-points-kkdcp = 1

# Cookie timeout (in seconds)
# Once a client is authenticated he's provided a cookie with
# which he can reconnect. That cookie will be invalidated if not
# used within this timeout value. This cookie remains valid, during
# the user's connected time, and after user disconnection it
# remains active for this amount of time. That setting should allow a
# reasonable amount of time for roaming between different networks.
cookie-timeout = 300

# If this is enabled (not recommended) the cookies will stay
# valid even after a user manually disconnects, and until they
# expire. This may improve roaming with some broken clients.
#persistent-cookies = true

# Whether roaming is allowed, i.e., if true a cookie is
# restricted to a single IP address and cannot be re-used
# from a different IP.
deny-roaming = false

# ReKey time (in seconds)
# ocserv will ask the client to refresh keys periodically once
# this amount of seconds is elapsed. Set to zero to disable (note
# that, some clients fail if rekey is disabled).
rekey-time = 172800

# ReKey method
# Valid options: ssl, new-tunnel
#  ssl: Will perform an efficient rehandshake on the channel allowing
#       a seamless connection during rekey.
#  new-tunnel: Will instruct the client to discard and re-establish the channel.
#       Use this option only if the connecting clients have issues with the ssl
#       option.
rekey-method = ssl

# Script to call when a client connects and obtains an IP
# Parameters are passed on the environment.
# REASON, USERNAME, GROUPNAME, HOSTNAME (the hostname selected by client), 
# DEVICE, IP_REAL (the real IP of the client), IP_LOCAL (the local IP
# in the P-t-P connection), IP_REMOTE (the VPN IP of the client),
# ID (a unique numeric ID); REASON may be "connect" or "disconnect".

# These scripts are not needed if you have setup an interface for all vpns+
# devices.
#connect-script = /usr/bin/ocserv-script
#disconnect-script = /usr/bin/ocserv-script

# UTMP
use-utmp = false

# Whether to enable support for the occtl tool (i.e., either through D-BUS,
# or via a unix socket).
use-occtl = true

# socket file used for IPC with occtl. You only need to set that,
# if you use more than a single servers.
occtl-socket-file = /var/run/occtl.socket

# PID file. It can be overriden in the command line.
pid-file = /var/run/ocserv.pid

# The default server directory. Does not require any devices present.
chroot-dir = /var/lib/ocserv

# socket file used for IPC, will be appended with .PID
# It must be accessible within the chroot environment (if any)
#socket-file = /var/run/ocserv-socket
socket-file = ocserv-socket

# The user the worker processes will be run as. It should be
# unique (no other services run as this user).
run-as-user = ocserv
run-as-group = ocserv

# Set the protocol-defined priority (SO_PRIORITY) for packets to
# be sent. That is a number from 0 to 6 with 0 being the lowest
# priority. Alternatively this can be used to set the IP Type-
# Of-Service, by setting it to a hexadecimal number (e.g., 0x20).
# This can be set per user/group or globally.
#net-priority = 3

# Set the VPN worker process into a specific cgroup. This is Linux
# specific and can be set per user/group or globally.
#cgroup = "cpuset,cpu:test"

#
# Network settings
#

# The name of the tun device
device = vpns

# Whether the generated IPs will be predictable, i.e., IP stays the
# same for the same user when possible.
predictable-ips = |PREDICTABLE_IPS|

# The default domain to be advertised
|ENABLE_DEFAULT_DOMAIN|default-domain = |DEFAULT_DOMAIN|

# The pool of addresses that leases will be given from.
ipv4-network = |IPV4ADDR|
ipv4-netmask = |NETMASK|

# The advertized DNS server. Use multiple lines for
# multiple servers.
# dns = fc00::4be0
#dns = 192.168.1.2

# The NBNS server (if any)
#nbns = 192.168.1.3

# The IPv6 subnet that leases will be given from.
|ENABLE_IPV6|ipv6-network = |IPV6ADDR|

# The domains over which the provided DNS should be used. Use
# multiple lines for multiple domains.
|ENABLE_SPLIT_DNS|split-dns = |DEFAULT_DOMAIN|

# Prior to leasing any IP from the pool ping it to verify that
# it is not in use by another (unrelated to this server) host.
ping-leases = |PING_LEASES|

# Whether to tunnel all DNS queries via the VPN. This is the default
# when a default route is set.
#tunnel-all-dns = true

# Unset to assign the default MTU of the device
# mtu = 

# Unset to enable bandwidth restrictions (in bytes/sec). The
# setting here is global, but can also be set per user or per group.
#rx-data-per-sec = 40000
#tx-data-per-sec = 40000

# The number of packets (of MTU size) that are available in
# the output buffer. The default is low to improve latency.
# Setting it higher will improve throughput.
#output-buffer = 10

# Routes to be forwarded to the client. If you need the
# client to forward routes to the server, you may use the 
# config-per-user/group or even connect and disconnect scripts.
#
# To set the server as the default gateway for the client just
# comment out all routes from the server.
#route = 192.168.1.0/255.255.255.0
#route = 192.168.5.0/255.255.255.0
#route = fef4:db8:1000:1001::/64

# Configuration files that will be applied per user connection or
# per group. Each file name on these directories must match the username
# or the groupname.
# The options allowed in the configuration files are dns, nbns,
#  ipv?-network, ipv4-netmask, ipv6-prefix, rx/tx-per-sec, iroute, route,
#  net-priority and cgroup.
#
# Note that the 'iroute' option allows to add routes on the server
# based on a user or group. The syntax depends on the input accepted
# by the commands route-add-cmd and route-del-cmd (see below).

config-per-user = /etc/ocserv/config-per-user/
config-per-group = /etc/ocserv/config-per-group/

# When config-per-xxx is specified and there is no group or user that
# matches, then utilize the following configuration.

#default-user-config = /etc/ocserv/defaults/user.conf
#default-group-config = /etc/ocserv/defaults/group.conf

# Groups that a client is allowed to select from.
# A client may belong in multiple groups, and in certain use-cases
# it is needed to switch between them. For these cases the client can
# select prior to authentication. Add multiple entries for multiple groups.
#select-group = group1
#select-group = group2[My group 2]
#select-group = tost[The tost group]

# The name of the group that if selected it would allow to use
# the assigned by default group.
#default-select-group = DEFAULT

# Instead of specifying manually all the allowed groups, you may instruct
# ocserv to scan all available groups and include the full list. That
# option is only functional on plain authentication.
#auto-select-group = true

# The system command to use to setup a route. %{R} will be replaced with the
# route/mask and %{D} with the (tun) device.
#
# The following example is from linux systems. %{R} should be something
# like 192.168.2.0/24

#route-add-cmd = "/usr/sbin/ip route add %{R} dev %{D}"
#route-del-cmd = "/usr/sbin/ip route delete %{R} dev %{D}"

route-add-cmd = "/sbin/route add -net %{RI} dev %{D}"
route-del-cmd = "/sbin/route del -net %{RI} dev %{D}"

# This option allows to forward a proxy. The special strings '%{U}'
# and '%{G}', if present will be replaced by the username and group name.
#proxy-url = http://example.com/
#proxy-url = http://example.com/%{U}/%{G}/hello

#
# The following options are for (experimental) AnyConnect client 
# compatibility. 

# Client profile xml. A sample file exists in doc/profile.xml.
# This file must be accessible from inside the worker's chroot. 
# It is not used by the openconnect client.
#user-profile = profile.xml

# Binary files that may be downloaded by the CISCO client. Must
# be within any chroot environment.
#binary-files = /path/to/binaries

# Unless set to false it is required for clients to present their
# certificate even if they are authenticating via a previously granted
# cookie and complete their authentication in the same TCP connection.
# Legacy CISCO clients do not do that, and thus this option should be 
# set for them.
cisco-client-compat = |CISCO_COMPAT|

#Advanced options

# Option to allow sending arbitrary custom headers to the client after
# authentication and prior to VPN tunnel establishment.
#custom-header = "X-My-Header: hi there"

expose-iroutes = true