krackattacks/tests/hwsim/test_p2p_autogo.py

#!/usr/bin/python
#
# P2P autonomous GO test cases
# Copyright (c) 2013, Jouni Malinen <j@w1.fi>
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.

import time
import subprocess
import logging
logger = logging.getLogger(__name__)

import hwsim_utils
from wlantest import Wlantest

def autogo(go):
    logger.info("Start autonomous GO " + go.ifname)
    res = go.p2p_start_go()
    logger.debug("res: " + str(res))

def connect_cli(go, client):
    logger.info("Try to connect the client to the GO")
    pin = client.wps_read_pin()
    go.p2p_go_authorize_client(pin)
    client.p2p_connect_group(go.p2p_dev_addr(), pin, timeout=60)
    logger.info("Client connected")
    hwsim_utils.test_connectivity_p2p(go, client)

def test_autogo(dev):
    """P2P autonomous GO and client joining group"""
    autogo(dev[0])
    connect_cli(dev[0], dev[1])
    dev[0].remove_group()
    ev = dev[1].wait_event(["P2P-GROUP-REMOVED"], timeout=2)
    if ev is None:
        raise Exception("Group removal event timed out")
    if "reason=GO_ENDING_SESSION" not in ev:
        raise Exception("Unexpected group removal reason")

def test_autogo_2cli(dev):
    """P2P autonomous GO and two clients joining group"""
    autogo(dev[0])
    connect_cli(dev[0], dev[1])
    connect_cli(dev[0], dev[2])
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    dev[0].global_request("P2P_REMOVE_CLIENT " + dev[1].p2p_dev_addr())
    ev = dev[1].wait_event(["P2P-GROUP-REMOVED"], timeout=2)
    if ev is None:
        raise Exception("Group removal event timed out")
    if "reason=GO_ENDING_SESSION" not in ev:
        raise Exception("Unexpected group removal reason")
    dev[0].remove_group()
    ev = dev[2].wait_event(["P2P-GROUP-REMOVED"], timeout=2)
    if ev is None:
        raise Exception("Group removal event timed out")
    if "reason=GO_ENDING_SESSION" not in ev:
        raise Exception("Unexpected group removal reason")

def test_autogo_tdls(dev):
    """P2P autonomous GO and two clients using TDLS"""
    wt = Wlantest()
    go = dev[0]
    logger.info("Start autonomous GO with fixed parameters " + go.ifname)
    id = go.add_network()
    go.set_network_quoted(id, "ssid", "DIRECT-tdls")
    go.set_network_quoted(id, "psk", "12345678")
    go.set_network(id, "mode", "3")
    go.set_network(id, "disabled", "2")
    res = go.p2p_start_go(persistent=id)
    logger.debug("res: " + str(res))
    wt.flush()
    wt.add_passphrase("12345678")
    connect_cli(go, dev[1])
    connect_cli(go, dev[2])
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    bssid = dev[0].p2p_interface_addr()
    addr1 = dev[1].p2p_interface_addr()
    addr2 = dev[2].p2p_interface_addr()
    dev[1].tdls_setup(addr2)
    time.sleep(1)
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    conf = wt.get_tdls_counter("setup_conf_ok", bssid, addr1, addr2);
    if conf == 0:
        raise Exception("No TDLS Setup Confirm (success) seen")
    dl = wt.get_tdls_counter("valid_direct_link", bssid, addr1, addr2);
    if dl == 0:
        raise Exception("No valid frames through direct link")
    wt.tdls_clear(bssid, addr1, addr2);
    dev[1].tdls_teardown(addr2)
    time.sleep(1)
    teardown = wt.get_tdls_counter("teardown", bssid, addr1, addr2);
    if teardown == 0:
        raise Exception("No TDLS Setup Teardown seen")
    wt.tdls_clear(bssid, addr1, addr2);
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    ap_path = wt.get_tdls_counter("valid_ap_path", bssid, addr1, addr2);
    if ap_path == 0:
        raise Exception("No valid frames via AP path")
    direct_link = wt.get_tdls_counter("valid_direct_link", bssid, addr1, addr2);
    if direct_link > 0:
        raise Exception("Unexpected frames through direct link")
    idirect_link = wt.get_tdls_counter("invalid_direct_link", bssid, addr1,
                                       addr2);
    if idirect_link > 0:
        raise Exception("Unexpected frames through direct link (invalid)")
    dev[2].remove_group()
    dev[1].remove_group()
    dev[0].remove_group()