Add manpage for eapol_test

Signed-hostap: Dan Williams <dcbw@redhat.com>

wpa_supplicant/doc/docbook/Makefile

@@ -7,6 +7,7 @@ FILES += wpa_passphrase
 FILES += wpa_priv
 FILES += wpa_supplicant.conf
 FILES += wpa_supplicant
+FILES += eapol_test
 
 man:
 	for i in $(FILES); do docbook2man $$i.sgml; done
@@ -20,7 +21,7 @@ pdf:
 
 
 clean:
-	rm -f wpa_background.8 wpa_cli.8 wpa_gui.8 wpa_passphrase.8 wpa_priv.8 wpa_supplicant.8
+	rm -f wpa_background.8 wpa_cli.8 wpa_gui.8 wpa_passphrase.8 wpa_priv.8 wpa_supplicant.8 eapol_test.8
 	rm -f wpa_supplicant.conf.5
 	rm -f manpage.links manpage.refs
 	rm -f $(FILES:%=%.pdf)

wpa_supplicant/doc/docbook/eapol_test.sgml

@@ -0,0 +1,205 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<refentry>
+  <refmeta>
+    <refentrytitle>eapol_test</refentrytitle>
+    <manvolnum>8</manvolnum>
+  </refmeta>
+  <refnamediv>
+    <refname>eapol_test</refname>
+
+    <refpurpose>EAP peer and RADIUS client testing</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <cmdsynopsis>
+      <command>eapol_test</command>
+      <arg>-nWS</arg>
+      <arg>-c<replaceable>config file</replaceable></arg>
+      <arg>-a<replaceable>server IP address</replaceable></arg>
+      <arg>-A<replaceable>client IP address</replaceable></arg>
+      <arg>-p<replaceable>UDP port</replaceable></arg>
+      <arg>-s<replaceable>shared secret</replaceable></arg>
+      <arg>-r<replaceable>re-authentications</replaceable></arg>
+      <arg>-t<replaceable>timeout</replaceable></arg>
+      <arg>-C<replaceable>Connect-Info</replaceable></arg>
+      <arg>-M<replaceable>MAC address</replaceable></arg>
+      <arg>-o<replaceable>file</replaceable></arg>
+      <arg>-N<replaceable>attr spec</replaceable></arg>
+    </cmdsynopsis>
+    <cmdsynopsis>
+      <command>eapol_test scard</command>
+    </cmdsynopsis>
+    <cmdsynopsis>
+      <command>eapol_test sim</command>
+      <arg>PIN</arg>
+      <arg>num triplets</arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Overview</title>
+
+    <para>eapol_test is a program that links together the same EAP
+    peer implementation that wpa_supplicant is using and the RADIUS
+    authentication client code from hostapd. In addition, it has
+    minimal glue code to combine these two components in similar
+    ways to IEEE 802.1X/EAPOL Authenticator state machines. In other
+    words, it integrates IEEE 802.1X Authenticator (normally, an
+    access point) and IEEE 802.1X Supplicant (normally, a wireless
+    client) together to generate a single program that can be used to
+    test EAP methods without having to setup an access point and a
+    wireless client.</para>
+
+    <para>The main uses for eapol_test are in interoperability testing
+    of EAP methods against RADIUS servers and in development testing
+    for new EAP methods. It can be easily used to automate EAP testing
+    for interoperability and regression since the program can be run
+    from shell scripts without require additional test components apart
+    from a RADIUS server. For example, the automated EAP tests described
+    in eap_testing.txt are implemented with eapol_test. Similarly,
+    eapol_test could be used to implement an automated regression
+    test suite for a RADIUS authentication server.</para>
+
+
+    <para>As an example:</para>
+
+<blockquote><programlisting>
+eapol_test -ctest.conf -a127.0.0.1 -p1812 -ssecret -r1
+</programlisting></blockquote>
+
+    <para>tries to complete EAP authentication based on the network
+    configuration from test.conf against the RADIUS server running
+    on the local host. A re-authentication is triggered to test fast
+    re-authentication. The configuration file uses the same format for
+    network blocks as wpa_supplicant.</para>
+
+  </refsect1>
+  <refsect1>
+    <title>Command Arguments</title>
+    <variablelist>
+      <varlistentry>
+	<term>-c configuration file path</term>
+
+	<listitem><para>A configuration to use.  The configuration should
+	use the same format for network blocks as wpa_supplicant.
+	</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-a AS address</term>
+
+	<listitem><para>IP address of the authentication server.  The
+	default is '127.0.0.1'.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-A client address</term>
+
+	<listitem><para>IP address of the client.  The default is to
+	select an address automatically.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-p AS port</term>
+
+	<listitem><para>UDP port of the authentication server. The
+	default is '1812'.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-s AS secret</term>
+
+	<listitem><para>Shared secret with the authentication server.
+	The default is 'radius'.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-r count</term>
+
+	<listitem><para>Number of reauthentications.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-t timeout</term>
+
+	<listitem><para>Timeout in seconds. The default is 30.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-C info</term>
+
+	<listitem><para>RADIUS Connect-Info.  The default is
+	'CONNECT 11Mbps 802.11b'.</para></listitem>
+      </varlistentry>
+
+
+      <varlistentry>
+	<term>-M mac address</term>
+
+	<listitem><para>Client MAC address (Calling-Station-Id).  The
+	default is '02:00:00:00:00:01'.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-o file</term>
+
+	<listitem><para>Location to write out server certificate.
+	</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-N attr spec</term>
+
+	<listitem><para>Send arbitrary attribute specific by
+	attr_id:syntax:value, or attr_id alone.  attr_id should be the numeric
+	ID of the attribute, and syntax should be one of 's' (string),
+	'd' (integer), or 'x' (octet string). The value is the attribute value
+	to send.  When attr_id is given alone, NULL is used as the attribute
+	value.  Multiple attributes can be specified by using the option
+	several times.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-n</term>
+
+	<listitem><para>Indicates that no MPPE keys are expected.
+	</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-W</term>
+
+	<listitem><para>Wait for a control interface monitor before starting.
+	</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+	<term>-S</term>
+
+	<listitem><para>Save configuration after authentication.
+	</para></listitem>
+      </varlistentry>
+
+    </variablelist>
+  </refsect1>
+  <refsect1>
+    <title>See Also</title>
+    <para>
+      <citerefentry>
+	<refentrytitle>wpa_supplicant</refentrytitle>
+	<manvolnum>8</manvolnum>
+      </citerefentry>
+    </para>
+  </refsect1>
+  <refsect1>
+    <title>Legal</title>
+    <para>wpa_supplicant is copyright (c) 2003-2014,
+    Jouni Malinen <email>j@w1.fi</email> and
+    contributors.
+    All Rights Reserved.</para>
+
+    <para>This program is licensed under the BSD license (the one with
+    advertisement clause removed).</para>
+  </refsect1>
+</refentry>