tests: Increase WPS connection timeout to make tests more robust

It was possible to hit the 10 second timeout in some test cases under
heavy load (e.g., with large number of VMs running tests in parallel).
These timeouts are not really indicating any real error, so make them
less likely to show up in reports by increasing the connection timeout
to 30 seconds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>

tests/hwsim/test_ap_wps.py

@@ -708,7 +708,7 @@ def test_ap_wps_setup_locked_timeout(dev, apdev):
         logger.info("Try incorrect AP PIN - attempt " + pin)
         dev[0].wps_reg(apdev[0]['bssid'], pin, new_ssid, "WPA2PSK",
                        "CCMP", new_passphrase, no_wait=True)
-        ev = dev[0].wait_event(["WPS-FAIL", "CTRL-EVENT-CONNECTED"])
+        ev = dev[0].wait_event(["WPS-FAIL", "CTRL-EVENT-CONNECTED"], timeout=15)
         if ev is None:
             raise Exception("Timeout on receiving WPS operation failure event")
         if "CTRL-EVENT-CONNECTED" in ev:
@@ -901,7 +901,7 @@ def test_ap_wps_er_add_enrollee(dev, apdev):
     if addr2 not in ev:
         raise Exception("Unexpected Enrollee MAC address")
     dev[0].request("WPS_ER_PIN " + addr2 + " " + pin + " " + addr2)
-    ev = dev[2].wait_event(["CTRL-EVENT-CONNECTED"], timeout=15)
+    ev = dev[2].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30)
     if ev is None:
         raise Exception("Association with the AP timed out")
     ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
@@ -1049,7 +1049,7 @@ def test_ap_wps_er_v10_add_enrollee_pin(dev, apdev):
     dev[0].request("WPS_ER_PIN any " + pin + " " + enrollee)
     dev[1].dump_monitor()
     dev[1].request("WPS_PIN any " + pin)
-    ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"], timeout=15)
+    ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30)
     if ev is None:
         raise Exception("Association with the AP timed out")
     ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
@@ -1324,14 +1324,14 @@ def test_ap_wps_per_station_psk(dev, apdev):
         logger.info("First enrollee")
         hapd.request("WPS_PBC")
         dev[0].request("WPS_PBC")
-        ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"])
+        ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30)
         if ev is None:
             raise Exception("Association with the AP timed out (1)")
 
         logger.info("Second enrollee")
         hapd.request("WPS_PBC")
         dev[1].request("WPS_PBC")
-        ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"])
+        ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30)
         if ev is None:
             raise Exception("Association with the AP timed out (2)")
 
@@ -1392,14 +1392,14 @@ def test_ap_wps_per_station_psk_failure(dev, apdev):
         logger.info("First enrollee")
         hapd.request("WPS_PBC")
         dev[0].request("WPS_PBC")
-        ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"])
+        ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30)
         if ev is None:
             raise Exception("Association with the AP timed out (1)")
 
         logger.info("Second enrollee")
         hapd.request("WPS_PBC")
         dev[1].request("WPS_PBC")
-        ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"])
+        ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30)
         if ev is None:
             raise Exception("Association with the AP timed out (2)")
 
@@ -2118,7 +2118,7 @@ def test_ap_wps_mixed_cred(dev, apdev):
     hapd = hostapd.Hostapd(apdev[0]['ifname'])
     hapd.request("WPS_PBC")
     dev[0].request("WPS_PBC")
-    ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15)
+    ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=30)
     if ev is None:
         raise Exception("WPS-SUCCESS event timed out")
     nets = dev[0].list_networks()