Sync with mac80211-next.git include/uapi/linux/nl80211.h

This brings in nl80211 definitions as of 2016-04-06.

Signed-off-by: Jouni Malinen <j@w1.fi>

src/drivers/nl80211_copy.h

@@ -322,7 +322,9 @@
  * @NL80211_CMD_GET_SCAN: get scan results
  * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
  *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	probe requests at CCK rate or not.
+ *	probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to
+ *	specify a BSSID to scan for; if not included, the wildcard BSSID will
+ *	be used.
  * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
  *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
@@ -427,7 +429,11 @@
  * @NL80211_CMD_ASSOCIATE: association request and notification; like
  *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
  *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
+ *	%NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
+ *	request is for the initial association to an ESS (that attribute not
+ *	included) or for reassociation within the ESS (that attribute is
+ *	included).
  * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
  *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
  *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
@@ -477,6 +483,9 @@
  *	set of BSSID,frequency parameters is used (i.e., either the enforcing
  *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
  *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+ *	%NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
+ *	the ESS in case the device is already associated and an association with
+ *	a different BSS is desired.
  *	Background scan period can optionally be
  *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
  *	if not specified default background scan configuration
@@ -1285,8 +1294,11 @@ enum nl80211_commands {
  * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
  *	sent by peer, for ROAM and successful CONNECT events.
  *
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
- *	commands to specify using a reassociate frame
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
+ *	commands to specify a request to reassociate within an ESS, i.e., to use
+ *	Reassociate Request frame (with the value of this attribute in the
+ *	Current AP address field) instead of Association Request frame which is
+ *	used for the initial association to an ESS.
  *
  * @NL80211_ATTR_KEY: key information in a nested attribute with
  *	%NL80211_KEY_* sub-attributes
@@ -1727,6 +1739,8 @@ enum nl80211_commands {
  *	underlying device supports these minimal RRM features:
  *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
  *		%NL80211_FEATURE_QUIET,
+ *	Or, if global RRM is supported, see:
+ *		%NL80211_EXT_FEATURE_RRM
  *	If this flag is used, driver must add the Power Capabilities IE to the
  *	association request. In addition, it must also set the RRM capability
  *	flag in the association request's Capability Info field.
@@ -1793,6 +1807,15 @@ enum nl80211_commands {
  *	in a PBSS. Specified in %NL80211_CMD_CONNECT to request
  *	connecting to a PCP, and in %NL80211_CMD_START_AP to start
  *	a PCP instead of AP. Relevant for DMG networks only.
+ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
+ *	BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
+ *	attributes according &enum nl80211_bss_select_attr to indicate what
+ *	BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
+ *	it contains the behaviour-specific attribute containing the parameters for
+ *	BSS selection to be done by driver and/or firmware.
+ *
+ * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
+ *	or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2170,6 +2193,10 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_PBSS,
 
+	NL80211_ATTR_BSS_SELECT,
+
+	NL80211_ATTR_STA_SUPPORT_P2P_PS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2313,6 +2340,20 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_sta_p2p_ps_status - station support of P2P PS
+ *
+ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
+ * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NUM_NL80211_P2P_PS_STATUS: number of values
+ */
+enum nl80211_sta_p2p_ps_status {
+	NL80211_P2P_PS_UNSUPPORTED = 0,
+	NL80211_P2P_PS_SUPPORTED,
+
+	NUM_NL80211_P2P_PS_STATUS,
+};
+
 #define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER
 
 /**
@@ -4402,12 +4443,18 @@ enum nl80211_feature_flags {
 /**
  * enum nl80211_ext_feature_index - bit index of extended features.
  * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
+ *	can request to use RRM (see %NL80211_ATTR_USE_RRM) with
+ *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
+ *	the ASSOC_REQ_USE_RRM flag in the association request even if
+ *	NL80211_FEATURE_QUIET is not advertized.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
 enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_VHT_IBSS,
+	NL80211_EXT_FEATURE_RRM,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4657,4 +4704,48 @@ enum nl80211_sched_scan_plan {
 		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
 };
 
+/**
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
+ *
+ * @band: band of BSS that must match for RSSI value adjustment.
+ * @delta: value used to adjust the RSSI value of matching BSS.
+ */
+struct nl80211_bss_select_rssi_adjust {
+	__u8 band;
+	__s8 delta;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_bss_select_attr - attributes for bss selection.
+ *
+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
+ *	is requested.
+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
+ *	selection should be done such that the specified band is preferred.
+ *	When there are multiple BSS-es in the preferred band, the driver
+ *	shall use RSSI-based BSS selection as a second step. The value of
+ *	this attribute is according to &enum nl80211_band (u32).
+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
+ *	BSS-es in the specified band is to be adjusted before doing
+ *	RSSI-based BSS selection. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
+ *
+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
+ * which the driver shall use.
+ */
+enum nl80211_bss_select_attr {
+	__NL80211_BSS_SELECT_ATTR_INVALID,
+	NL80211_BSS_SELECT_ATTR_RSSI,
+	NL80211_BSS_SELECT_ATTR_BAND_PREF,
+	NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
+
+	/* keep last */
+	__NL80211_BSS_SELECT_ATTR_AFTER_LAST,
+	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
+};
+
 #endif /* __LINUX_NL80211_H */