Remove old wpa_supplicant/hostapd doxygen files

hostapd/Makefile

@@ -734,27 +734,6 @@ clean:
 	rm -f core *~ *.o hostapd hostapd_cli nt_password_hash hlr_auc_gw
 	rm -f *.d
 
-%.eps: %.fig
-	fig2dev -L eps $*.fig $*.eps
-
-%.png: %.fig
-	fig2dev -L png -m 3 $*.fig | pngtopnm | pnmscale 0.4 | pnmtopng \
-		> $*.png
-
-docs-pics: doc/hostapd.png doc/hostapd.eps
-
-docs: docs-pics
-	(cd ..; doxygen hostapd/doc/doxygen.full; cd hostapd)
-	$(MAKE) -C doc/latex
-	cp doc/latex/refman.pdf hostapd-devel.pdf
-
-docs-fast: docs-pics
-	(cd ..; doxygen hostapd/doc/doxygen.fast; cd hostapd)
-
-clean-docs:
-	rm -rf doc/latex doc/html
-	rm -f doc/hostapd.{eps,png} hostapd-devel.pdf
-
 TEST_SRC_MILENAGE = ../src/hlr_auc_gw/milenage.c ../src/crypto/aes-internal.c ../src/crypto/aes-internal-dec.c \
 		../src/crypto/aes-cbc.c \
 		../src/crypto/aes-ctr.c \

hostapd/doc/.gitignore

@@ -1,4 +0,0 @@
-html
-latex
-hostapd.eps
-hostapd.png

hostapd/doc/code_structure.doxygen

@@ -1,5 +0,0 @@
-/**
-\page code_structure Structure of the source code
-
-
-*/

hostapd/doc/ctrl_iface.doxygen

@@ -1,66 +0,0 @@
-/**
-\page ctrl_iface_page Control interface
-
-hostapd implements a control interface that can be used by
-external programs to control the operations of the hostapd
-daemon and to get status information and event notifications. There is
-a small C library, in a form of a single C file, wpa_ctrl.c, that
-provides helper functions to facilitate the use of the control
-interface. External programs can link this file into them and then use
-the library functions documented in wpa_ctrl.h to interact with
-%wpa_supplicant. This library can also be used with C++. hostapd_cli.c
-is an example program using this library.
-
-There are multiple mechanisms for inter-process communication. For
-example, Linux version of hostapd is using UNIX domain sockets for the
-control interface. The use of the functions defined in wpa_ctrl.h can
-be used to hide the details of the used IPC from external programs.
-
-
-\section using_ctrl_iface Using the control interface
-
-External programs, e.g., a GUI or a configuration utility, that need to
-communicate with hostapd should link in wpa_ctrl.c. This
-allows them to use helper functions to open connection to the control
-interface with wpa_ctrl_open() and to send commands with
-wpa_ctrl_request().
-
-hostapd uses the control interface for two types of communication:
-commands and unsolicited event messages. Commands are a pair of
-messages, a request from the external program and a response from
-hostapd. These can be executed using wpa_ctrl_request().
-Unsolicited event messages are sent by hostapd to the control
-interface connection without specific request from the external program
-for receiving each message. However, the external program needs to
-attach to the control interface with wpa_ctrl_attach() to receive these
-unsolicited messages.
-
-If the control interface connection is used both for commands and
-unsolicited event messages, there is potential for receiving an
-unsolicited message between the command request and response.
-wpa_ctrl_request() caller will need to supply a callback, msg_cb,
-for processing these messages. Often it is easier to open two
-control interface connections by calling wpa_ctrl_open() twice and
-then use one of the connections for commands and the other one for
-unsolicited messages. This way command request/response pairs will
-not be broken by unsolicited messages. wpa_cli is an example of how
-to use only one connection for both purposes and wpa_gui demonstrates
-how to use two separate connections.
-
-Once the control interface connection is not needed anymore, it should
-be closed by calling wpa_ctrl_close(). If the connection was used for
-unsolicited event messages, it should be first detached by calling
-wpa_ctrl_detach().
-
-
-\section ctrl_iface_cmds Control interface commands
-
-Following commands can be used with wpa_ctrl_request():
-
-\subsection ctrl_iface_PING PING
-
-This command can be used to test whether hostapd is replying
-to the control interface commands. The expected reply is \c PONG if the
-connection is open and hostapd is processing commands.
-
-*/

hostapd/doc/doxygen.fast

@@ -1,238 +0,0 @@
-# Doxyfile 1.4.4
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME           = hostapd
-PROJECT_NUMBER         = 0.6.x
-OUTPUT_DIRECTORY       = hostapd/doc
-CREATE_SUBDIRS         = NO
-OUTPUT_LANGUAGE        = English
-BRIEF_MEMBER_DESC      = YES
-REPEAT_BRIEF           = YES
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-ALWAYS_DETAILED_SEC    = NO
-INLINE_INHERITED_MEMB  = NO
-FULL_PATH_NAMES        = YES
-STRIP_FROM_PATH        =
-STRIP_FROM_INC_PATH    = 
-SHORT_NAMES            = NO
-JAVADOC_AUTOBRIEF      = NO
-MULTILINE_CPP_IS_BRIEF = NO
-DETAILS_AT_TOP         = NO
-INHERIT_DOCS           = YES
-DISTRIBUTE_GROUP_DOC   = NO
-SEPARATE_MEMBER_PAGES  = NO
-TAB_SIZE               = 8
-ALIASES                = 
-OPTIMIZE_OUTPUT_FOR_C  = YES
-OPTIMIZE_OUTPUT_JAVA   = NO
-SUBGROUPING            = YES
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-EXTRACT_ALL            = NO
-EXTRACT_PRIVATE        = NO
-EXTRACT_STATIC         = NO
-EXTRACT_LOCAL_CLASSES  = YES
-EXTRACT_LOCAL_METHODS  = NO
-HIDE_UNDOC_MEMBERS     = NO
-HIDE_UNDOC_CLASSES     = NO
-HIDE_FRIEND_COMPOUNDS  = NO
-HIDE_IN_BODY_DOCS      = NO
-INTERNAL_DOCS          = NO
-CASE_SENSE_NAMES       = YES
-HIDE_SCOPE_NAMES       = NO
-SHOW_INCLUDE_FILES     = YES
-INLINE_INFO            = YES
-SORT_MEMBER_DOCS       = YES
-SORT_BRIEF_DOCS        = NO
-SORT_BY_SCOPE_NAME     = NO
-GENERATE_TODOLIST      = YES
-GENERATE_TESTLIST      = YES
-GENERATE_BUGLIST       = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS       = 
-MAX_INITIALIZER_LINES  = 30
-SHOW_USED_FILES        = YES
-SHOW_DIRECTORIES       = YES
-FILE_VERSION_FILTER    = 
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET                  = NO
-WARNINGS               = YES
-WARN_IF_UNDOCUMENTED   = NO
-WARN_IF_DOC_ERROR      = YES
-WARN_NO_PARAMDOC       = YES
-WARN_FORMAT            = "$file:$line: $text"
-WARN_LOGFILE           = 
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT                  = hostapd \
-	src/common \
-	src/crypto \
-	src/eap_common \
-	src/eap_server \
-	src/l2_packet \
-	src/radius \
-	src/rsn_supp \
-	src/tls \
-	src/utils \
-	src/wps
-FILE_PATTERNS          = *.c *.h *.doxygen
-RECURSIVE              = YES
-EXCLUDE                = 
-EXCLUDE_SYMLINKS       = NO
-EXCLUDE_PATTERNS       = 
-EXAMPLE_PATH           = 
-EXAMPLE_PATTERNS       = *
-EXAMPLE_RECURSIVE      = NO
-IMAGE_PATH             = hostapd/doc
-INPUT_FILTER           = kerneldoc2doxygen.pl
-FILTER_PATTERNS        = 
-FILTER_SOURCE_FILES    = YES
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER         = YES
-INLINE_SOURCES         = NO
-STRIP_CODE_COMMENTS    = YES
-REFERENCED_BY_RELATION = NO
-REFERENCES_RELATION    = NO
-VERBATIM_HEADERS       = NO
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX     = YES
-COLS_IN_ALPHA_INDEX    = 3
-IGNORE_PREFIX          = 
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML          = YES
-HTML_OUTPUT            = html
-HTML_FILE_EXTENSION    = .html
-HTML_HEADER            = 
-HTML_FOOTER            = 
-HTML_STYLESHEET        = 
-HTML_ALIGN_MEMBERS     = YES
-GENERATE_HTMLHELP      = NO
-CHM_FILE               = 
-HHC_LOCATION           = 
-GENERATE_CHI           = NO
-BINARY_TOC             = NO
-TOC_EXPAND             = NO
-DISABLE_INDEX          = NO
-ENUM_VALUES_PER_LINE   = 4
-GENERATE_TREEVIEW      = NO
-TREEVIEW_WIDTH         = 250
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX         = NO
-LATEX_OUTPUT           = latex
-LATEX_CMD_NAME         = latex
-MAKEINDEX_CMD_NAME     = makeindex
-COMPACT_LATEX          = NO
-PAPER_TYPE             = a4wide
-EXTRA_PACKAGES         = 
-LATEX_HEADER           = 
-PDF_HYPERLINKS         = YES
-USE_PDFLATEX           = YES
-LATEX_BATCHMODE        = NO
-LATEX_HIDE_INDICES     = NO
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF           = NO
-RTF_OUTPUT             = rtf
-COMPACT_RTF            = NO
-RTF_HYPERLINKS         = NO
-RTF_STYLESHEET_FILE    = 
-RTF_EXTENSIONS_FILE    = 
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN           = NO
-MAN_OUTPUT             = man
-MAN_EXTENSION          = .3
-MAN_LINKS              = NO
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML           = NO
-XML_OUTPUT             = xml
-XML_SCHEMA             = 
-XML_DTD                = 
-XML_PROGRAMLISTING     = YES
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF   = NO
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-GENERATE_PERLMOD       = NO
-PERLMOD_LATEX          = NO
-PERLMOD_PRETTY         = YES
-PERLMOD_MAKEVAR_PREFIX = 
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING   = YES
-MACRO_EXPANSION        = NO
-EXPAND_ONLY_PREDEF     = NO
-SEARCH_INCLUDES        = YES
-INCLUDE_PATH           = 
-INCLUDE_FILE_PATTERNS  = 
-PREDEFINED             = RADIUS_SERVER EAP_SERVER EAP_SIM
-EXPAND_AS_DEFINED      = 
-SKIP_FUNCTION_MACROS   = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references   
-#---------------------------------------------------------------------------
-TAGFILES               = 
-GENERATE_TAGFILE       = 
-ALLEXTERNALS           = NO
-EXTERNAL_GROUPS        = YES
-PERL_PATH              = /usr/bin/perl
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS         = NO
-HIDE_UNDOC_RELATIONS   = YES
-HAVE_DOT               = NO
-CLASS_GRAPH            = YES
-COLLABORATION_GRAPH    = YES
-GROUP_GRAPHS           = YES
-UML_LOOK               = NO
-TEMPLATE_RELATIONS     = NO
-INCLUDE_GRAPH          = YES
-INCLUDED_BY_GRAPH      = YES
-CALL_GRAPH             = YES
-GRAPHICAL_HIERARCHY    = YES
-DIRECTORY_GRAPH        = NO
-DOT_IMAGE_FORMAT       = png
-DOT_PATH               = 
-DOTFILE_DIRS           = 
-MAX_DOT_GRAPH_DEPTH    = 1000
-DOT_TRANSPARENT        = NO
-DOT_MULTI_TARGETS      = NO
-GENERATE_LEGEND        = YES
-DOT_CLEANUP            = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
-#---------------------------------------------------------------------------
-SEARCHENGINE           = NO

hostapd/doc/doxygen.full

@@ -1,238 +0,0 @@
-# Doxyfile 1.4.4
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME           = hostapd
-PROJECT_NUMBER         = 0.6.x
-OUTPUT_DIRECTORY       = hostapd/doc
-CREATE_SUBDIRS         = NO
-OUTPUT_LANGUAGE        = English
-BRIEF_MEMBER_DESC      = YES
-REPEAT_BRIEF           = YES
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-ALWAYS_DETAILED_SEC    = NO
-INLINE_INHERITED_MEMB  = NO
-FULL_PATH_NAMES        = YES
-STRIP_FROM_PATH        =
-STRIP_FROM_INC_PATH    = 
-SHORT_NAMES            = NO
-JAVADOC_AUTOBRIEF      = NO
-MULTILINE_CPP_IS_BRIEF = NO
-DETAILS_AT_TOP         = NO
-INHERIT_DOCS           = YES
-DISTRIBUTE_GROUP_DOC   = NO
-SEPARATE_MEMBER_PAGES  = NO
-TAB_SIZE               = 8
-ALIASES                = 
-OPTIMIZE_OUTPUT_FOR_C  = YES
-OPTIMIZE_OUTPUT_JAVA   = NO
-SUBGROUPING            = YES
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-EXTRACT_ALL            = NO
-EXTRACT_PRIVATE        = NO
-EXTRACT_STATIC         = NO
-EXTRACT_LOCAL_CLASSES  = YES
-EXTRACT_LOCAL_METHODS  = NO
-HIDE_UNDOC_MEMBERS     = NO
-HIDE_UNDOC_CLASSES     = NO
-HIDE_FRIEND_COMPOUNDS  = NO
-HIDE_IN_BODY_DOCS      = NO
-INTERNAL_DOCS          = NO
-CASE_SENSE_NAMES       = YES
-HIDE_SCOPE_NAMES       = NO
-SHOW_INCLUDE_FILES     = YES
-INLINE_INFO            = YES
-SORT_MEMBER_DOCS       = YES
-SORT_BRIEF_DOCS        = NO
-SORT_BY_SCOPE_NAME     = NO
-GENERATE_TODOLIST      = YES
-GENERATE_TESTLIST      = YES
-GENERATE_BUGLIST       = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS       = 
-MAX_INITIALIZER_LINES  = 30
-SHOW_USED_FILES        = YES
-SHOW_DIRECTORIES       = YES
-FILE_VERSION_FILTER    = 
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET                  = NO
-WARNINGS               = YES
-WARN_IF_UNDOCUMENTED   = NO
-WARN_IF_DOC_ERROR      = YES
-WARN_NO_PARAMDOC       = YES
-WARN_FORMAT            = "$file:$line: $text"
-WARN_LOGFILE           = 
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT                  = hostapd \
-	src/common \
-	src/crypto \
-	src/eap_common \
-	src/eap_server \
-	src/l2_packet \
-	src/radius \
-	src/rsn_supp \
-	src/tls \
-	src/utils \
-	src/wps
-FILE_PATTERNS          = *.c *.h *.doxygen
-RECURSIVE              = YES
-EXCLUDE                = 
-EXCLUDE_SYMLINKS       = NO
-EXCLUDE_PATTERNS       = 
-EXAMPLE_PATH           = 
-EXAMPLE_PATTERNS       = *
-EXAMPLE_RECURSIVE      = NO
-IMAGE_PATH             = hostapd/doc
-INPUT_FILTER           = kerneldoc2doxygen.pl
-FILTER_PATTERNS        = 
-FILTER_SOURCE_FILES    = YES
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER         = YES
-INLINE_SOURCES         = NO
-STRIP_CODE_COMMENTS    = YES
-REFERENCED_BY_RELATION = NO
-REFERENCES_RELATION    = NO
-VERBATIM_HEADERS       = NO
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX     = YES
-COLS_IN_ALPHA_INDEX    = 3
-IGNORE_PREFIX          = 
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML          = YES
-HTML_OUTPUT            = html
-HTML_FILE_EXTENSION    = .html
-HTML_HEADER            = 
-HTML_FOOTER            = 
-HTML_STYLESHEET        = 
-HTML_ALIGN_MEMBERS     = YES
-GENERATE_HTMLHELP      = NO
-CHM_FILE               = 
-HHC_LOCATION           = 
-GENERATE_CHI           = NO
-BINARY_TOC             = NO
-TOC_EXPAND             = NO
-DISABLE_INDEX          = NO
-ENUM_VALUES_PER_LINE   = 4
-GENERATE_TREEVIEW      = NO
-TREEVIEW_WIDTH         = 250
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX         = YES
-LATEX_OUTPUT           = latex
-LATEX_CMD_NAME         = latex
-MAKEINDEX_CMD_NAME     = makeindex
-COMPACT_LATEX          = NO
-PAPER_TYPE             = a4wide
-EXTRA_PACKAGES         = 
-LATEX_HEADER           = 
-PDF_HYPERLINKS         = YES
-USE_PDFLATEX           = YES
-LATEX_BATCHMODE        = NO
-LATEX_HIDE_INDICES     = NO
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF           = NO
-RTF_OUTPUT             = rtf
-COMPACT_RTF            = NO
-RTF_HYPERLINKS         = NO
-RTF_STYLESHEET_FILE    = 
-RTF_EXTENSIONS_FILE    = 
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN           = NO
-MAN_OUTPUT             = man
-MAN_EXTENSION          = .3
-MAN_LINKS              = NO
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML           = NO
-XML_OUTPUT             = xml
-XML_SCHEMA             = 
-XML_DTD                = 
-XML_PROGRAMLISTING     = YES
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF   = NO
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-GENERATE_PERLMOD       = NO
-PERLMOD_LATEX          = NO
-PERLMOD_PRETTY         = YES
-PERLMOD_MAKEVAR_PREFIX = 
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING   = YES
-MACRO_EXPANSION        = NO
-EXPAND_ONLY_PREDEF     = NO
-SEARCH_INCLUDES        = YES
-INCLUDE_PATH           = 
-INCLUDE_FILE_PATTERNS  = 
-PREDEFINED             = RADIUS_SERVER EAP_SERVER EAP_SIM
-EXPAND_AS_DEFINED      = 
-SKIP_FUNCTION_MACROS   = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references   
-#---------------------------------------------------------------------------
-TAGFILES               = 
-GENERATE_TAGFILE       = 
-ALLEXTERNALS           = NO
-EXTERNAL_GROUPS        = YES
-PERL_PATH              = /usr/bin/perl
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS         = NO
-HIDE_UNDOC_RELATIONS   = YES
-HAVE_DOT               = YES
-CLASS_GRAPH            = YES
-COLLABORATION_GRAPH    = YES
-GROUP_GRAPHS           = YES
-UML_LOOK               = NO
-TEMPLATE_RELATIONS     = NO
-INCLUDE_GRAPH          = YES
-INCLUDED_BY_GRAPH      = YES
-CALL_GRAPH             = YES
-GRAPHICAL_HIERARCHY    = YES
-DIRECTORY_GRAPH        = NO
-DOT_IMAGE_FORMAT       = png
-DOT_PATH               = 
-DOTFILE_DIRS           = 
-MAX_DOT_GRAPH_DEPTH    = 1000
-DOT_TRANSPARENT        = NO
-DOT_MULTI_TARGETS      = NO
-GENERATE_LEGEND        = YES
-DOT_CLEANUP            = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
-#---------------------------------------------------------------------------
-SEARCHENGINE           = YES

hostapd/doc/driver_wrapper.doxygen

@@ -1,20 +0,0 @@
-/**
-\page driver_wrapper Driver wrapper implementation (driver.h, drivers.c)
-
-All hardware and driver dependent functionality is in separate C files
-that implement defined wrapper functions. Other parts
-of the hostapd are designed to be hardware, driver, and operating
-system independent.
-
-Driver wrappers need to implement whatever calls are used in the
-target operating system/driver for controlling wireless LAN
-devices. As an example, in case of Linux, these are mostly some glue
-code and ioctl() calls and netlink message parsing for Linux Wireless
-Extensions (WE). Since features required for WPA were added only recently to
-Linux Wireless Extensions (in version 18), some driver specific code is used
-in number of driver interface implementations. These driver dependent parts
-can be replaced with generic code in driver_wext.c once the target driver
-includes full support for WE-18. After that, all Linux drivers, at
-least in theory, could use the same driver wrapper code.
-
-*/

hostapd/doc/eap.doxygen

@@ -1,56 +0,0 @@
-/**
-\page eap_module EAP server implementation
-
-Extensible Authentication Protocol (EAP) is an authentication framework
-defined in RFC 3748. hostapd uses a separate code module for EAP server
-implementation. This module was designed to use only a minimal set of
-direct function calls (mainly, to debug/event functions) in order for
-it to be usable in other programs. The design of the EAP
-implementation is based loosely on RFC 4137. The state machine is
-defined in this RFC and so is the interface between the server state
-machine and methods. As such, this RFC provides useful information for
-understanding the EAP server implementation in hostapd.
-
-Some of the terminology used in EAP state machine is referring to
-EAPOL (IEEE 802.1X), but there is no strict requirement on the lower
-layer being IEEE 802.1X if EAP module is built for other programs than
-%wpa_supplicant. These terms should be understood to refer to the
-lower layer as defined in RFC 4137.
-
-
-\section adding_eap_methods Adding EAP methods
-
-Each EAP method is implemented as a separate module, usually as one C
-file named eap_<name of the method>.c, e.g., eap_md5.c. All EAP
-methods use the same interface between the server state machine and
-method specific functions. This allows new EAP methods to be added
-without modifying the core EAP state machine implementation.
-
-New EAP methods need to be registered by adding them into the build
-(Makefile) and the EAP method registration list in the
-eap_server_register_methods() function of eap_methods.c. Each EAP
-method should use a build-time configuration option, e.g., EAP_TLS, in
-order to make it possible to select which of the methods are included
-in the build.
-
-EAP methods must implement the interface defined in eap_i.h. struct
-eap_method defines the needed function pointers that each EAP method
-must provide. In addition, the EAP type and name are registered using
-this structure. This interface is based on section 4.4 of RFC 4137.
-
-It is recommended that the EAP methods would use generic helper
-functions, eap_msg_alloc() and eap_hdr_validate() when processing
-messages. This allows code sharing and can avoid missing some of the
-needed validation steps for received packets. In addition, these
-functions make it easier to change between expanded and legacy EAP
-header, if needed.
-
-When adding an EAP method that uses a vendor specific EAP type
-(Expanded Type as defined in RFC 3748, Chapter 5.7), the new method
-must be registered by passing vendor id instead of EAP_VENDOR_IETF to
-eap_server_method_alloc(). These methods must not try to emulate
-expanded types by registering a legacy EAP method for type 254. See
-eap_vendor_test.c for an example of an EAP method implementation that
-is implemented as an expanded type.
-
-*/

hostapd/doc/hostapd.fig

@@ -1,264 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-6 1875 4050 2925 4350
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 1875 4050 2925 4050 2925 4350 1875 4350 1875 4050
-4 0 0 50 -1 0 12 0.0000 4 180 735 2025 4275 l2_packet\001
--6
-6 4725 1200 5925 1500
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4725 1200 5925 1200 5925 1500 4725 1500 4725 1200
-4 0 0 50 -1 0 12 0.0000 4 135 1005 4800 1425 GUI frontend\001
--6
-6 6000 2700 7200 3225
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6000 2700 7200 2700 7200 3225 6000 3225 6000 2700
-4 0 0 50 -1 0 12 0.0000 4 135 975 6075 2925 WPA/WPA2\001
-4 0 0 50 -1 0 12 0.0000 4 135 1065 6075 3150 state machine\001
--6
-6 6000 4950 7200 5475
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6000 4950 7200 4950 7200 5475 6000 5475 6000 4950
-4 0 0 50 -1 0 12 0.0000 4 135 360 6075 5175 EAP\001
-4 0 0 50 -1 0 12 0.0000 4 135 1065 6075 5400 state machine\001
--6
-6 4350 3900 5025 4425
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4350 3900 5025 3900 5025 4425 4350 4425 4350 3900
-4 0 0 50 -1 0 12 0.0000 4 105 420 4500 4125 event\001
-4 0 0 50 -1 0 12 0.0000 4 180 315 4500 4350 loop\001
--6
-6 4275 2550 5100 2850
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4275 2550 5100 2550 5100 2850 4275 2850 4275 2550
-4 0 0 50 -1 0 12 0.0000 4 135 450 4425 2775 ctrl i/f\001
--6
-6 6000 3900 7200 4425
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6000 3900 7200 3900 7200 4425 6000 4425 6000 3900
-4 0 0 50 -1 0 12 0.0000 4 135 600 6075 4125 EAPOL\001
-4 0 0 50 -1 0 12 0.0000 4 135 1065 6075 4350 state machine\001
--6
-6 2775 3150 4050 3450
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 2775 3150 4050 3150 4050 3450 2775 3450 2775 3150
-4 0 0 50 -1 0 12 0.0000 4 180 990 2925 3375 configuration\001
--6
-6 3450 1200 4575 1500
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 3450 1200 4575 1200 4575 1500 3450 1500 3450 1200
-4 0 0 50 -1 0 12 0.0000 4 180 870 3600 1425 hostapd_cli\001
--6
-6 3525 7800 5775 8100
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 3525 7800 5775 7800 5775 8100 3525 8100 3525 7800
-4 0 0 50 -1 0 12 0.0000 4 135 2145 3600 8025 kernel network device driver\001
--6
-6 4275 6000 5100 6300
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4275 6000 5100 6000 5100 6300 4275 6300 4275 6000
-4 0 0 50 -1 0 12 0.0000 4 135 630 4350 6225 driver i/f\001
--6
-6 8175 4725 9225 5025
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 4725 9225 4725 9225 5025 8175 5025 8175 4725
-4 0 0 50 -1 0 12 0.0000 4 135 735 8250 4950 EAP-TLS\001
--6
-6 9300 4725 10350 5025
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 4725 10350 4725 10350 5025 9300 5025 9300 4725
-4 0 0 50 -1 0 12 0.0000 4 135 810 9375 4950 EAP-MD5\001
--6
-6 8175 5100 9225 5400
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 5100 9225 5100 9225 5400 8175 5400 8175 5100
-4 0 0 50 -1 0 12 0.0000 4 135 885 8250 5325 EAP-PEAP\001
--6
-6 9300 5100 10350 5400
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 5100 10350 5100 10350 5400 9300 5400 9300 5100
-4 0 0 50 -1 0 12 0.0000 4 135 840 9375 5325 EAP-TTLS\001
--6
-6 8175 5475 9225 5775
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 5475 9225 5475 9225 5775 8175 5775 8175 5475
-4 0 0 50 -1 0 12 0.0000 4 135 780 8250 5700 EAP-GTC\001
--6
-6 8175 5850 9225 6150
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 5850 9225 5850 9225 6150 8175 6150 8175 5850
-4 0 0 50 -1 0 12 0.0000 4 135 750 8250 6075 EAP-SIM\001
--6
-6 8175 6225 9225 6525
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 6225 9225 6225 9225 6525 8175 6525 8175 6225
-4 0 0 50 -1 0 12 0.0000 4 135 765 8250 6450 EAP-PSK\001
--6
-6 9300 5850 10350 6150
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 5850 10350 5850 10350 6150 9300 6150 9300 5850
-4 0 0 50 -1 0 12 0.0000 4 135 825 9375 6075 EAP-AKA\001
--6
-6 9300 5475 10350 5775
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 5475 10350 5475 10350 5775 9300 5775 9300 5475
-4 0 0 50 -1 0 12 0.0000 4 135 795 9375 5700 EAP-PAX\001
--6
-6 8175 6600 9675 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 6600 9675 6600 9675 6900 8175 6900 8175 6600
-4 0 0 50 -1 0 12 0.0000 4 135 1365 8250 6825 EAP-MSCHAPv2\001
--6
-6 8700 3450 9375 3750
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8700 3450 9375 3450 9375 3750 8700 3750 8700 3450
-4 0 0 50 -1 0 12 0.0000 4 150 480 8775 3675 crypto\001
--6
-6 9600 3450 10275 3750
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9600 3450 10275 3450 10275 3750 9600 3750 9600 3450
-4 0 0 50 -1 0 12 0.0000 4 135 315 9750 3675 TLS\001
--6
-6 6000 5775 7200 6300
-6 6000 5775 7200 6300
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6000 5775 7200 5775 7200 6300 6000 6300 6000 5775
-4 0 0 50 -1 0 12 0.0000 4 135 690 6075 6000 RADIUS\001
--6
-4 0 0 50 -1 0 12 0.0000 4 90 480 6075 6225 server\001
--6
-6 8100 2250 8925 2775
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8100 2250 8925 2250 8925 2775 8100 2775 8100 2250
-4 0 0 50 -1 0 12 0.0000 4 135 690 8175 2475 RADIUS\001
-4 0 0 50 -1 0 12 0.0000 4 135 420 8175 2700 client\001
--6
-6 3150 5475 4425 5775
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 3150 5475 4425 5475 4425 5775 3150 5775 3150 5475
-4 0 0 50 -1 0 12 0.0000 4 135 990 3300 5700 driver events\001
--6
-6 1950 5550 2625 6075
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 1950 5550 2625 5550 2625 6075 1950 6075 1950 5550
-4 0 0 50 -1 0 12 0.0000 4 135 540 2025 5775 Station\001
-4 0 0 50 -1 0 12 0.0000 4 135 375 2025 6000 table\001
--6
-6 1875 4725 2925 5250
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 1875 4725 2925 4725 2925 5250 1875 5250 1875 4725
-4 0 0 50 -1 0 12 0.0000 4 135 960 1950 4950 IEEE 802.11\001
-4 0 0 50 -1 0 12 0.0000 4 135 555 1950 5175 MLME\001
--6
-2 1 1 1 0 7 50 -1 -1 3.000 0 0 -1 0 0 2
-	 1275 4200 1875 4200
-2 1 1 1 0 7 50 -1 -1 4.000 0 0 -1 0 0 2
-	 4500 2550 3900 1500
-2 1 1 1 0 7 50 -1 -1 4.000 0 0 -1 0 0 2
-	 4800 2550 5400 1500
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 2925 4200 4350 4200
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 5025 3900 6000 3000
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 5025 4200 6000 4200
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4650 6000 4650 4425
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6600 4425 6600 4950
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6600 3225 6600 3900
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 7200 5250 8100 5250
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 9075 4425 9075 3750
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 7200 3000 8700 3525
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4650 3900 4650 2850
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 7200 4125 8700 3675
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6000 4350 5025 6000
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6000 3150 4875 6000
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 1500 2100 10800 2100 10800 7500 1500 7500 1500 2100
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 9900 4425 9900 3750
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 1
-	 4350 3900
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4350 3900 4050 3450
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4350 4425 4050 5475
-2 1 1 1 0 7 50 -1 -1 4.000 0 0 -1 0 0 2
-	 2250 7200 4200 7800
-2 1 1 1 0 7 50 -1 -1 4.000 0 0 -1 0 0 2
-	 7200 7200 5100 7800
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 2775 6900 3675 6900 3675 7200 2775 7200 2775 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 3750 6900 4650 6900 4650 7200 3750 7200 3750 6900
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 4
-	 2250 6900 2250 6600 7200 6600 7200 6900
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 3225 6900 3225 6600
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4200 6900 4200 6600
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 5175 6900 5175 6600
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6150 6900 6150 6600
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4650 6600 4650 6300
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 1800 6900 2700 6900 2700 7200 1800 7200 1800 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4725 6900 5625 6900 5625 7200 4725 7200 4725 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 5700 6900 6600 6900 6600 7200 5700 7200 5700 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6675 6900 7800 6900 7800 7200 6675 7200 6675 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8100 6975 10425 6975 10425 4425 8100 4425 8100 6975
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6600 5475 6600 5775
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 5025 4425 6000 5775
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 3
-	 4800 3900 5925 2550 8100 2550
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 7200 3900 8475 2775
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9450 2250 10425 2250 10425 2775 9450 2775 9450 2250
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 8925 2475 9450 2475
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 2325 5550 2325 5250
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 2925 4950 4350 4275
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 3
-	 2850 4725 5775 2400 8100 2400
-4 0 0 50 -1 0 12 0.0000 4 135 915 375 3975 EAPOL and\001
-4 0 0 50 -1 0 12 0.0000 4 180 630 375 4200 pre-auth\001
-4 0 0 50 -1 0 12 0.0000 4 180 810 375 4425 ethertypes\001
-4 0 0 50 -1 0 12 0.0000 4 135 1050 375 4650 from/to kernel\001
-4 0 0 50 -1 0 12 0.0000 4 135 1920 3675 1875 frontend control interface\001
-4 0 0 50 -1 2 14 0.0000 4 195 720 1637 2371 hostapd\001
-4 0 0 50 -1 0 12 0.0000 4 180 600 3825 7125 prism54\001
-4 0 0 50 -1 0 12 0.0000 4 180 510 1875 7125 hostap\001
-4 0 0 50 -1 0 12 0.0000 4 135 600 2850 7125 madwifi\001
-4 0 0 50 -1 0 12 0.0000 4 135 270 4800 7125 bsd\001
-4 0 0 50 -1 0 12 0.0000 4 105 300 6750 7125 test\001
-4 0 0 50 -1 0 12 0.0000 4 135 420 5775 7125 wired\001
-4 0 0 50 -1 0 12 0.0000 4 135 1050 8700 4650 EAP methods\001
-4 0 0 50 -1 0 12 0.0000 4 135 690 9525 2475 RADIUS\001
-4 0 0 50 -1 0 12 0.0000 4 180 825 9525 2700 accounting\001

hostapd/doc/kerneldoc2doxygen.pl

@@ -1,129 +0,0 @@
-#!/usr/bin/perl -w
-#
-##########################################################################
-# Convert kernel-doc style comments to Doxygen comments.
-##########################################################################
-#
-# This script reads a C source file from stdin, and writes
-# to stdout.  Normal usage:
-#
-# $ mv file.c file.c.gtkdoc
-# $ kerneldoc2doxygen.pl <file.c.gtkdoc >file.c
-#
-# Or to do the same thing with multiple files:
-# $ perl -i.gtkdoc kerneldoc2doxygen.pl *.c *.h
-#
-# This script may also be suitable for use as a Doxygen input filter,
-# but that has not been tested.
-#
-# Back up your source files before using this script!!
-#
-##########################################################################
-# Copyright (C) 2003 Jonathan Foster <jon@jon-foster.co.uk>
-# Copyright (C) 2005 Jouni Malinen <j@w1.fi>
-# (modified for kerneldoc format used in wpa_supplicant)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-# or look at http://www.gnu.org/licenses/gpl.html
-##########################################################################
-
-
-##########################################################################
-#
-# This function converts a single comment from gtk-doc to Doxygen format.
-# The parameter does not include the opening or closing lines
-# (i.e. given a comment like this:
-#    "/**\n"
-#    " * FunctionName:\n"
-#    " * @foo: This describes the foo parameter\n"
-#    " * @bar: This describes the bar parameter\n"
-#    " * @Returns: This describes the return value\n"
-#    " *\n"
-#    " * This describes the function.\n"
-#    " */\n"
-# This function gets:
-#    " * FunctionName:\n"
-#    " * @foo: This describes the foo parameter\n"
-#    " * @bar: This describes the bar parameter\n"
-#    " * @Returns: This describes the return value\n"
-#    " *\n"
-#    " * This describes the function.\n"
-# And it returns:
-#    " * This describes the function.\n"
-#    " *\n"
-#    " * @param foo This describes the foo parameter\n"
-#    " * @param bar This describes the bar parameter\n"
-#    " * @return This describes the return value\n"
-# )
-#
-sub fixcomment {
-    $t = $_[0];
-
-    # " * func: foo" --> "\brief foo\n"
-    # " * struct bar: foo" --> "\brief foo\n"
-    # If this fails, not a kernel-doc comment ==> return unmodified.
-    ($t =~ s/^[\t ]*\*[\t ]*(struct )?([^ \t\n]*) - ([^\n]*)/\\brief $3\n/s)
-      or return $t;
-
-    # " * Returns: foo" --> "\return foo"
-    $t =~ s/\n[\t ]*\*[\t ]*Returns:/\n\\return/sig;
-
-    # " * @foo: bar" --> "\param foo bar"
-    # Handle two common typos: No ":", or "," instead of ":".
-    $t =~ s/\n[\t ]*\*[\t ]*\@([^ :,]*)[:,]?[\t ]*/\n\\param $1 /sg;
-
-    return $t;
-}
-
-##########################################################################
-# Start of main code
-
-# Read entire stdin into memory - one multi-line string.
-$_ = do { local $/; <> };
-
-s{^/\*\n \*}{/\*\* \\file\n\\brief};
-s{ \* Copyright}{\\par Copyright\nCopyright};
-
-# Fix any comments like "/*************" so they don't match.
-# "/***" ===> "/* *"
-s{/\*\*\*}{/\* \*}gs;
-
-# The main comment-detection code.
-s{
-    (               # $1 = Open comment
-        /\*\*       # Open comment
-        (?!\*)      # Do not match /*** (redundant due to fixup above).
-        [\t ]*\n?   # If 1st line is whitespace, match the lot (including the newline).
-    )
-    (.*?)           # $2 = Body of comment (multi-line)
-    (               # $3 = Close comment
-        (           # If possible, match the whitespace before the close-comment
-            (?<=\n) # This part only matches after a newline
-            [\t ]*  # Eat whitespace
-        )?
-        \*/         # Close comment
-    )
- }
- {
-    $1 . fixcomment($2) . $3
- }gesx;
-# ^^^^ Modes: g - Global, match all occurances.
-#             e - Evaluate the replacement as an expression.
-#             s - Single-line - allows the pattern to match across newlines.
-#             x - eXtended pattern, ignore embedded whitespace
-#                 and allow comments.
-
-# Write results to stdout
-print $_;
-

hostapd/doc/mainpage.doxygen

@@ -1,52 +0,0 @@
-/**
-\mainpage Developers' documentation for hostapd
-
-hostapd includes IEEE 802.11 access point management (authentication /
-association), IEEE 802.1X/WPA/WPA2 Authenticator, EAP server, and
-RADIUS authentication server functionality. It can be build with
-various configuration option, e.g., a standalone AP management
-solution or a RADIUS authentication server with support for number of
-EAP methods.
-
-The goal of this documentation and comments in the source code is to
-give enough information for other developers to understand how hostapd
-has been implemented, how it can be modified, how new drivers can be
-supported, and how hostapd can be ported to other operating
-systems. If any information is missing, feel free to contact Jouni
-Malinen <j@w1.fi> for more information. Contributions as
-patch files are also very welcome at the same address. Please note
-that hostapd is licensed under dual license, GPLv2 or BSD at user's
-choice. All contributions to hostapd are expected to use compatible
-licensing terms.
-
-The source code and read-only access to hostapd CVS repository
-is available from the project home page at
-http://hostap.epitest.fi/hostapd/. This developers' documentation
-is also available as a PDF file from
-http://hostap.epitest.fi/hostapd/hostapd-devel.pdf .
-
-The design goal for hostapd was to use hardware, driver, and
-OS independent, portable C code for all WPA functionality. The source
-code is divided into separate C files as shown on the \ref
-code_structure "code structure page". All hardware/driver specific
-functionality is in separate files that implement a \ref
-driver_wrapper "well-defined driver API". Information about porting
-to different target boards and operating systems is available on
-the \ref porting "porting page".
-
-EAPOL (IEEE 802.1X) state machines are implemented as a separate
-module that interacts with \ref eap_module "EAP server implementation".
-Similarly, RADIUS authentication server is in its own separate module.
-Both IEEE 802.1X and RADIUS authentication server can use EAP server
-functionality.
-
-hostapd implements a \ref ctrl_iface_page "control interface" that can
-be used by external programs to control the operations of the hostapdt
-daemon and to get status information and event notifications. There is
-a small C library that provides helper functions to facilitate the use
-of the control interface. This library can also be used with C++.
-
-\image html hostapd.png "hostapd modules"
-\image latex hostapd.eps "hostapd modules" width=15cm
-
-*/

hostapd/doc/porting.doxygen

@@ -1,5 +0,0 @@
-/**
-\page porting Porting to different target boards and operating systems
-
-
-*/

wpa_supplicant/Makefile

@@ -1390,25 +1390,4 @@ clean:
 	rm -f core *~ *.o *.d eap_*.so $(ALL) $(WINALL) eapol_test preauth_test
 	rm -f wpa_priv
 
-%.eps: %.fig
-	fig2dev -L eps $*.fig $*.eps
-
-%.png: %.fig
-	fig2dev -L png -m 3 $*.fig | pngtopnm | pnmscale 0.4 | pnmtopng \
-		> $*.png
-
-docs-pics: doc/wpa_supplicant.png doc/wpa_supplicant.eps
-
-docs: docs-pics
-	(cd ..; doxygen wpa_supplicant/doc/doxygen.full; cd wpa_supplicant)
-	$(MAKE) -C doc/latex
-	cp doc/latex/refman.pdf wpa_supplicant-devel.pdf
-
-docs-fast: docs-pics
-	(cd ..; doxygen wpa_supplicant/doc/doxygen.fast; cd wpa_supplicant)
-
-clean-docs:
-	rm -rf doc/latex doc/html
-	rm -f doc/wpa_supplicant.{eps,png} wpa_supplicant-devel.pdf
-
 -include $(OBJS:%.o=%.d)

wpa_supplicant/doc/.gitignore

@@ -1,4 +0,0 @@
-html
-latex
-wpa_supplicant.eps
-wpa_supplicant.png

wpa_supplicant/doc/code_structure.doxygen

@@ -1,322 +0,0 @@
-/**
-\page code_structure Structure of the source code
-
-[ \ref wpa_supplicant_core "wpa_supplicant core functionality" |
-\ref generic_helper_func "Generic helper functions" |
-\ref crypto_func "Cryptographic functions" |
-\ref tls_func "TLS library" |
-\ref configuration "Configuration" |
-\ref ctrl_iface "Control interface" |
-\ref wpa_code "WPA supplicant" |
-\ref eap_peer "EAP peer" |
-\ref eapol_supp "EAPOL supplicant" |
-\ref win_port "Windows port" |
-\ref test_programs "Test programs" ]
-
-%wpa_supplicant implementation is divided into number of independent
-modules. Core code includes functionality for controlling the network
-selection, association, and configuration. Independent modules include
-WPA code (key handshake, PMKSA caching, pre-authentication), EAPOL
-state machine, and EAP state machine and methods. In addition, there
-are number of separate files for generic helper functions.
-
-Both WPA and EAPOL/EAP state machines can be used separately in other
-programs than %wpa_supplicant. As an example, the included test
-programs eapol_test and preauth_test are using these modules.
-
-\ref driver_wrapper "Driver interface API" is defined in driver.h and
-all hardware/driver dependent functionality is implemented in
-driver_*.c.
-
-
-\section wpa_supplicant_core wpa_supplicant core functionality
-
-wpa_supplicant.c
-	Program initialization, main control loop
-
-main.c
-	main() for UNIX-like operating systems and MinGW (Windows); this
-	uses command line arguments to configure wpa_supplicant
-
-events.c
-	Driver event processing; wpa_supplicant_event() and related functions
-
-wpa_supplicant_i.h
-	Internal definitions for %wpa_supplicant core; should not be
-	included into independent modules
-
-
-\section generic_helper_func Generic helper functions
-
-%wpa_supplicant uses generic helper functions some of which are shared
-with with hostapd. The following C files are currently used:
-
-eloop.c and eloop.h
-	Event loop (select() loop with registerable timeouts, socket read
-	callbacks, and signal callbacks)
-
-common.c and common.h
-	Common helper functions
-
-defs.h
-	Definitions shared by multiple files
-
-l2_packet.h, l2_packet_linux.c, and l2_packet_pcap.c
-	Layer 2 (link) access wrapper (includes native Linux implementation
-	and wrappers for libdnet/libpcap). A new l2_packet implementation
-	may need to be added when porting to new operating systems that are
-	not supported by libdnet/libpcap. Makefile can be used to select which
-	l2_packet implementation is included. l2_packet_linux.c uses Linux
-	packet sockets and l2_packet_pcap.c has a more portable version using
-	libpcap and libdnet.
-
-pcsc_funcs.c and pcsc_funcs.h
-	Wrapper for PC/SC lite SIM and smart card readers
-
-priv_netlink.h
-	Private version of netlink definitions from Linux kernel header files;
-	this could be replaced with C library header file once suitable
-	version becomes commonly available
-
-version.h
-	Version number definitions
-
-wireless_copy.h
-	Private version of Linux wireless extensions definitions from kernel
-	header files; this could be replaced with C library header file once
-	suitable version becomes commonly available
-
-
-\section crypto_func Cryptographic functions
-
-md5.c and md5.h
-	MD5 (replaced with a crypto library if TLS support is included)
-	HMAC-MD5 (keyed checksum for message authenticity validation)
-
-rc4.c and rc4.h
-	RC4 (broadcast/default key encryption)
-
-sha1.c and sha1.h
-	SHA-1 (replaced with a crypto library if TLS support is included)
-	HMAC-SHA-1 (keyed checksum for message authenticity validation)
-	PRF-SHA-1 (pseudorandom (key/nonce generation) function)
-	PBKDF2-SHA-1 (ASCII passphrase to shared secret)
-	T-PRF (for EAP-FAST)
-	TLS-PRF (RFC 2246)
-
-sha256.c and sha256.h
-	SHA-256 (replaced with a crypto library if TLS support is included)
-
-aes_wrap.c, aes_wrap.h, aes.c
-	AES (replaced with a crypto library if TLS support is included),
-	AES Key Wrap Algorithm with 128-bit KEK, RFC3394 (broadcast/default
-	key encryption),
-	One-Key CBC MAC (OMAC1) hash with AES-128,
-	AES-128 CTR mode encryption,
-	AES-128 EAX mode encryption/decryption,
-	AES-128 CBC
-
-crypto.h
-	Definition of crypto library wrapper
-
-crypto_openssl.c
-	Wrapper functions for libcrypto (OpenSSL)
-
-crypto_internal.c
-	Wrapper functions for internal crypto implementation
-
-crypto_gnutls.c
-	Wrapper functions for libgcrypt (used by GnuTLS)
-
-ms_funcs.c and ms_funcs.h
-	Helper functions for MSCHAPV2 and LEAP
-
-tls.h
-	Definition of TLS library wrapper
-
-tls_none.c
-	Dummy implementation of TLS library wrapper for cases where TLS
-	functionality is not included.
-
-tls_openssl.c
-	TLS library wrapper for openssl
-
-tls_internal.c
-	TLS library for internal TLS implementation
-
-tls_gnutls.c
-	TLS library wrapper for GnuTLS
-
-
-\section tls_func TLS library
-
-asn1.c and asn1.h
-	ASN.1 DER parsing
-
-bignum.c and bignum.h
-	Big number math
-
-rsa.c and rsa.h
-	RSA
-
-x509v3.c and x509v3.h
-	X.509v3 certificate parsing and processing
-
-tlsv1_client.c, tlsv1_client.h
-	TLSv1 client (RFC 2246)
-
-tlsv1_client_i.h
-	Internal structures for TLSv1 client
-
-tlsv1_client_read.c
-	TLSv1 client: read handshake messages
-
-tlsv1_client_write.c
-	TLSv1 client: write handshake messages
-
-tlsv1_common.c and tlsv1_common.h
-	Common TLSv1 routines and definitions
-
-tlsv1_cred.c and tlsv1_cred.h
-	TLSv1 credentials
-
-tlsv1_record.c and tlsv1_record.h
-	TLSv1 record protocol
-
-
-\section configuration Configuration
-
-config_ssid.h
-	Definition of per network configuration items
-
-config.h
-	Definition of the %wpa_supplicant configuration
-
-config.c
-	Configuration parser and common functions
-
-config_file.c
-	Configuration backend for text files (e.g., wpa_supplicant.conf)
-
-config_winreg.c
-	Configuration backend for Windows registry
-
-
-\section ctrl_iface Control interface
-
-%wpa_supplicant has a \ref ctrl_iface_page "control interface"
-that can be used to get status
-information and manage operations from external programs. An example
-command line interface (wpa_cli) and GUI (wpa_gui) for this interface
-are included in the %wpa_supplicant distribution.
-
-ctrl_iface.c and ctrl_iface.h
-	%wpa_supplicant-side of the control interface
-
-ctrl_iface_unix.c
-	UNIX domain sockets -based control interface backend
-
-ctrl_iface_udp.c
-	UDP sockets -based control interface backend
-
-ctrl_iface_named_pipe.c
-	Windows named pipes -based control interface backend
-
-wpa_ctrl.c and wpa_ctrl.h
-	Library functions for external programs to provide access to the
-	%wpa_supplicant control interface
-
-wpa_cli.c
-	Example program for using %wpa_supplicant control interface
-
-
-\section wpa_code WPA supplicant
-
-wpa.c and wpa.h
-	WPA state machine and 4-Way/Group Key Handshake processing
-
-preauth.c and preauth.h
-	PMKSA caching and pre-authentication (RSN/WPA2)
-
-wpa_i.h
-	Internal definitions for WPA code; not to be included to other modules.
-
-\section eap_peer EAP peer
-
-\ref eap_module "EAP peer implementation" is a separate module that
-can be used by other programs than just %wpa_supplicant.
-
-eap.c and eap.h
-	EAP state machine and method interface
-
-eap_defs.h
-	Common EAP definitions
-
-eap_i.h
-	Internal definitions for EAP state machine and EAP methods; not to be
-	included in other modules
-
-eap_sim_common.c and eap_sim_common.h
-	Common code for EAP-SIM and EAP-AKA
-
-eap_tls_common.c and eap_tls_common.h
-	Common code for EAP-PEAP, EAP-TTLS, and EAP-FAST
-
-eap_tlv.c and eap_tlv.h
-	EAP-TLV code for EAP-PEAP and EAP-FAST
-
-eap_ttls.c and eap_ttls.h
-	EAP-TTLS
-
-eap_pax.c, eap_pax_common.h, eap_pax_common.c
-	EAP-PAX
-
-eap_psk.c, eap_psk_common.h, eap_psk_common.c
-	EAP-PSK (note: this is not needed for WPA-PSK)
-
-eap_sake.c, eap_sake_common.h, eap_sake_common.c
-	EAP-SAKE
-
-eap_gpsk.c, eap_gpsk_common.h, eap_gpsk_common.c
-	EAP-GPSK
-
-eap_aka.c, eap_fast.c, eap_gtc.c, eap_leap.c, eap_md5.c, eap_mschapv2.c,
-eap_otp.c, eap_peap.c, eap_sim.c, eap_tls.c
-	Other EAP method implementations
-
-
-\section eapol_supp EAPOL supplicant
-
-eapol_supp_sm.c and eapol_supp_sm.h
-	EAPOL supplicant state machine and IEEE 802.1X processing
-
-
-\section win_port Windows port
-
-ndis_events.c
-	Code for receiving NdisMIndicateStatus() events and delivering them to
-	%wpa_supplicant driver_ndis.c in more easier to use form
-
-win_if_list.c
-	External program for listing current network interface
-
-
-\section test_programs Test programs
-
-radius_client.c and radius_client.h
-	RADIUS authentication client implementation for eapol_test
-
-radius.c and radius.h
-	RADIUS message processing for eapol_test
-
-eapol_test.c
-	Standalone EAP testing tool with integrated RADIUS authentication
-	client
-
-preauth_test.c
-	Standalone RSN pre-authentication tool
-
-wpa_passphrase.c
-	WPA ASCII passphrase to PSK conversion
-
-*/

wpa_supplicant/doc/ctrl_iface.doxygen

@@ -1,481 +0,0 @@
-/**
-\page ctrl_iface_page Control interface
-
-%wpa_supplicant implements a control interface that can be used by
-external programs to control the operations of the %wpa_supplicant
-daemon and to get status information and event notifications. There is
-a small C library, in a form of a single C file, wpa_ctrl.c, that
-provides helper functions to facilitate the use of the control
-interface. External programs can link this file into them and then use
-the library functions documented in wpa_ctrl.h to interact with
-%wpa_supplicant. This library can also be used with C++. wpa_cli.c and
-wpa_gui are example programs using this library.
-
-There are multiple mechanisms for inter-process communication. For
-example, Linux version of %wpa_supplicant is using UNIX domain sockets
-for the control interface and Windows version UDP sockets. The use of
-the functions defined in wpa_ctrl.h can be used to hide the details of
-the used IPC from external programs.
-
-
-\section using_ctrl_iface Using the control interface
-
-External programs, e.g., a GUI or a configuration utility, that need to
-communicate with %wpa_supplicant should link in wpa_ctrl.c. This
-allows them to use helper functions to open connection to the control
-interface with wpa_ctrl_open() and to send commands with
-wpa_ctrl_request().
-
-%wpa_supplicant uses the control interface for two types of communication:
-commands and unsolicited event messages. Commands are a pair of
-messages, a request from the external program and a response from
-%wpa_supplicant. These can be executed using wpa_ctrl_request().
-Unsolicited event messages are sent by %wpa_supplicant to the control
-interface connection without specific request from the external program
-for receiving each message. However, the external program needs to
-attach to the control interface with wpa_ctrl_attach() to receive these
-unsolicited messages.
-
-If the control interface connection is used both for commands and
-unsolicited event messages, there is potential for receiving an
-unsolicited message between the command request and response.
-wpa_ctrl_request() caller will need to supply a callback, msg_cb,
-for processing these messages. Often it is easier to open two
-control interface connections by calling wpa_ctrl_open() twice and
-then use one of the connections for commands and the other one for
-unsolicited messages. This way command request/response pairs will
-not be broken by unsolicited messages. wpa_cli is an example of how
-to use only one connection for both purposes and wpa_gui demonstrates
-how to use two separate connections.
-
-Once the control interface connection is not needed anymore, it should
-be closed by calling wpa_ctrl_close(). If the connection was used for
-unsolicited event messages, it should be first detached by calling
-wpa_ctrl_detach().
-
-
-\section ctrl_iface_cmds Control interface commands
-
-Following commands can be used with wpa_ctrl_request():
-
-\subsection ctrl_iface_PING PING
-
-This command can be used to test whether %wpa_supplicant is replying
-to the control interface commands. The expected reply is \c PONG if the
-connection is open and %wpa_supplicant is processing commands.
-
-
-\subsection ctrl_iface_MIB MIB
-
-Request a list of MIB variables (dot1x, dot11). The output is a text
-block with each line in \c variable=value format. For example:
-
-\verbatim
-dot11RSNAOptionImplemented=TRUE
-dot11RSNAPreauthenticationImplemented=TRUE
-dot11RSNAEnabled=FALSE
-dot11RSNAPreauthenticationEnabled=FALSE
-dot11RSNAConfigVersion=1
-dot11RSNAConfigPairwiseKeysSupported=5
-dot11RSNAConfigGroupCipherSize=128
-dot11RSNAConfigPMKLifetime=43200
-dot11RSNAConfigPMKReauthThreshold=70
-dot11RSNAConfigNumberOfPTKSAReplayCounters=1
-dot11RSNAConfigSATimeout=60
-dot11RSNAAuthenticationSuiteSelected=00-50-f2-2
-dot11RSNAPairwiseCipherSelected=00-50-f2-4
-dot11RSNAGroupCipherSelected=00-50-f2-4
-dot11RSNAPMKIDUsed=
-dot11RSNAAuthenticationSuiteRequested=00-50-f2-2
-dot11RSNAPairwiseCipherRequested=00-50-f2-4
-dot11RSNAGroupCipherRequested=00-50-f2-4
-dot11RSNAConfigNumberOfGTKSAReplayCounters=0
-dot11RSNA4WayHandshakeFailures=0
-dot1xSuppPaeState=5
-dot1xSuppHeldPeriod=60
-dot1xSuppAuthPeriod=30
-dot1xSuppStartPeriod=30
-dot1xSuppMaxStart=3
-dot1xSuppSuppControlledPortStatus=Authorized
-dot1xSuppBackendPaeState=2
-dot1xSuppEapolFramesRx=0
-dot1xSuppEapolFramesTx=440
-dot1xSuppEapolStartFramesTx=2
-dot1xSuppEapolLogoffFramesTx=0
-dot1xSuppEapolRespFramesTx=0
-dot1xSuppEapolReqIdFramesRx=0
-dot1xSuppEapolReqFramesRx=0
-dot1xSuppInvalidEapolFramesRx=0
-dot1xSuppEapLengthErrorFramesRx=0
-dot1xSuppLastEapolFrameVersion=0
-dot1xSuppLastEapolFrameSource=00:00:00:00:00:00
-\endverbatim
-
-
-\subsection ctrl_iface_STATUS STATUS
-
-Request current WPA/EAPOL/EAP status information. The output is a text
-block with each line in \c variable=value format. For example:
-
-\verbatim
-bssid=02:00:01:02:03:04
-ssid=test network
-pairwise_cipher=CCMP
-group_cipher=CCMP
-key_mgmt=WPA-PSK
-wpa_state=COMPLETED
-ip_address=192.168.1.21
-Supplicant PAE state=AUTHENTICATED
-suppPortStatus=Authorized
-EAP state=SUCCESS
-\endverbatim
-
-
-\subsection ctrl_iface_STATUS-VERBOSE STATUS-VERBOSE
-
-Same as STATUS, but with more verbosity (i.e., more \c variable=value pairs).
-
-\verbatim
-bssid=02:00:01:02:03:04
-ssid=test network
-id=0
-pairwise_cipher=CCMP
-group_cipher=CCMP
-key_mgmt=WPA-PSK
-wpa_state=COMPLETED
-ip_address=192.168.1.21
-Supplicant PAE state=AUTHENTICATED
-suppPortStatus=Authorized
-heldPeriod=60
-authPeriod=30
-startPeriod=30
-maxStart=3
-portControl=Auto
-Supplicant Backend state=IDLE
-EAP state=SUCCESS
-reqMethod=0
-methodState=NONE
-decision=COND_SUCC
-ClientTimeout=60
-\endverbatim
-
-
-\subsection ctrl_iface_PMKSA PMKSA
-
-Show PMKSA cache
-
-\verbatim
-Index / AA / PMKID / expiration (in seconds) / opportunistic
-1 / 02:00:01:02:03:04 / 000102030405060708090a0b0c0d0e0f / 41362 / 0
-2 / 02:00:01:33:55:77 / 928389281928383b34afb34ba4212345 / 362 / 1
-\endverbatim
-
-
-\subsection ctrl_iface_SET SET <variable> <value>
-
-Set variables:
-- EAPOL::heldPeriod
-- EAPOL::authPeriod
-- EAPOL::startPeriod
-- EAPOL::maxStart
-- dot11RSNAConfigPMKLifetime
-- dot11RSNAConfigPMKReauthThreshold
-- dot11RSNAConfigSATimeout
-
-Example command:
-\verbatim
-SET EAPOL::heldPeriod 45
-\endverbatim
-
-
-\subsection ctrl_iface_LOGON LOGON
-
-IEEE 802.1X EAPOL state machine logon.
-
-
-\subsection ctrl_iface_LOGOFF LOGOFF
-
-IEEE 802.1X EAPOL state machine logoff.
-
-
-\subsection ctrl_iface_REASSOCIATE REASSOCIATE
-
-Force reassociation.
-
-
-\subsection ctrl_iface_RECONNECT RECONNECT
-
-Connect if disconnected (i.e., like \c REASSOCIATE, but only connect
-if in disconnected state).
-
-
-\subsection ctrl_iface_PREAUTH PREAUTH <BSSID>
-
-Start pre-authentication with the given BSSID.
-
-
-\subsection ctrl_iface_ATTACH ATTACH
-
-Attach the connection as a monitor for unsolicited events. This can
-be done with wpa_ctrl_attach().
-
-
-\subsection ctrl_iface_DETACH DETACH
-
-Detach the connection as a monitor for unsolicited events. This can
-be done with wpa_ctrl_detach().
-
-
-\subsection ctrl_iface_LEVEL LEVEL <debug level>
-
-Change debug level.
-
-
-\subsection ctrl_iface_RECONFIGURE RECONFIGURE
-
-Force %wpa_supplicant to re-read its configuration data.
-
-
-\subsection ctrl_iface_TERMINATE TERMINATE
-
-Terminate %wpa_supplicant process.
-
-
-\subsection ctrl_iface_BSSID BSSID <network id> <BSSID>
-
-Set preferred BSSID for a network. Network id can be received from the
-\c LIST_NETWORKS command output.
-
-
-\subsection ctrl_iface_LIST_NETWORKS LIST_NETWORKS
-
-List configured networks.
-
-\verbatim
-network id / ssid / bssid / flags
-0	example network	any	[CURRENT]
-\endverbatim
-
-(note: fields are separated with tabs)
-
-
-\subsection ctrl_iface_DISCONNECT DISCONNECT
-
-Disconnect and wait for \c REASSOCIATE or \c RECONNECT command before
-connecting.
-
-
-\subsection ctrl_iface_SCAN SCAN
-
-Request a new BSS scan.
-
-
-\subsection ctrl_iface_SCAN_RESULTS SCAN_RESULTS
-
-Get the latest scan results.
-
-\verbatim
-bssid / frequency / signal level / flags / ssid
-00:09:5b:95:e0:4e	2412	208	[WPA-PSK-CCMP]	jkm private
-02:55:24:33:77:a3	2462	187	[WPA-PSK-TKIP]	testing
-00:09:5b:95:e0:4f	2412	209		jkm guest
-\endverbatim
-
-(note: fields are separated with tabs)
-
-
-\subsection ctrl_iface_BSS BSS
-
-Get detailed per-BSS scan results. \c BSS command can be used to
-iterate through scan results one BSS at a time and to fetch all
-information from the found BSSes. This provides access to the same
-data that is available through \c SCAN_RESULTS but in a way that
-avoids problems with large number of scan results not fitting in the
-ctrl_iface messages.
-
-There are two options for selecting the BSS with the \c BSS command:
-"BSS <idx>" requests information for the BSS identified by the index
-(0 .. size-1) in the scan results table and "BSS <BSSID>" requests
-information for the given BSS (based on BSSID in 00:01:02:03:04:05
-format).
-
-BSS information is presented in following format. Please note that new
-fields may be added to this field=value data, so the ctrl_iface user
-should be prepared to ignore values it does not understand.
-
-\verbatim
-bssid=00:09:5b:95:e0:4e
-freq=2412
-beacon_int=0
-capabilities=0x0011
-qual=51
-noise=161
-level=212
-tsf=0000000000000000
-ie=000b6a6b6d2070726976617465010180dd180050f20101000050f20401000050f20401000050f2020000
-ssid=jkm private
-\endverbatim
-
-
-
-\subsection ctrl_iface_SELECT_NETWORK SELECT_NETWORK <network id>
-
-Select a network (disable others). Network id can be received from the
-\c LIST_NETWORKS command output.
-
-
-\subsection ctrl_iface_ENABLE_NETWORK ENABLE_NETWORK <network id>
-
-Enable a network. Network id can be received from the
-\c LIST_NETWORKS command output. Special network id \c all can be
-used to enable all network.
-
-
-\subsection ctrl_iface_DISABLE_NETWORK DISABLE_NETWORK <network id>
-
-Disable a network. Network id can be received from the
-\c LIST_NETWORKS command output. Special network id \c all can be
-used to disable all network.
-
-
-\subsection ctrl_iface_ADD_NETWORK ADD_NETWORK
-
-Add a new network. This command creates a new network with empty
-configuration. The new network is disabled and once it has been
-configured it can be enabled with \c ENABLE_NETWORK command. \c ADD_NETWORK
-returns the network id of the new network or FAIL on failure.
-
-
-\subsection ctrl_iface_REMOVE_NETWORK REMOVE_NETWORK <network id>
-
-Remove a network. Network id can be received from the
-\c LIST_NETWORKS command output. Special network id \c all can be
-used to remove all network.
-
-
-\subsection ctrl_iface_SET_NETWORK SET_NETWORK <network id> <variable> <value>
-
-Set network variables. Network id can be received from the
-\c LIST_NETWORKS command output.
-
-This command uses the same variables and data formats as the
-configuration file. See example wpa_supplicant.conf for more details.
-
-- ssid (network name, SSID)
-- psk (WPA passphrase or pre-shared key)
-- key_mgmt (key management protocol)
-- identity (EAP identity)
-- password (EAP password)
-- ...
-
-
-\subsection ctrl_iface_GET_NETWORK GET_NETWORK <network id> <variable>
-
-Get network variables. Network id can be received from the
-\c LIST_NETWORKS command output.
-
-
-\subsection ctrl_iface_SAVE_CONFIG SAVE_CONFIG
-
-Save the current configuration.
-
-
-\section ctrl_iface_interactive Interactive requests
-
-If %wpa_supplicant needs additional information during authentication
-(e.g., password), it will use a specific prefix, \c CTRL-REQ-
-(\a WPA_CTRL_REQ macro) in an unsolicited event message. An external
-program, e.g., a GUI, can provide such information by using
-\c CTRL-RSP- (\a WPA_CTRL_RSP macro) prefix in a command with matching
-field name.
-
-The following fields can be requested in this way from the user:
-- IDENTITY (EAP identity/user name)
-- PASSWORD (EAP password)
-- NEW_PASSWORD (New password if the server is requesting password change)
-- PIN (PIN code for accessing a SIM or smartcard)
-- OTP (one-time password; like password, but the value is used only once)
-- PASSPHRASE (passphrase for a private key file)
-
-\verbatim
-CTRL-REQ-<field name>-<network id>-<human readable text>
-CTRL-RSP-<field name>-<network id>-<value>
-\endverbatim
-
-For example, request from %wpa_supplicant:
-\verbatim
-CTRL-REQ-PASSWORD-1-Password needed for SSID test-network
-\endverbatim
-
-And a matching reply from the GUI:
-\verbatim
-CTRL-RSP-PASSWORD-1-secret
-\endverbatim
-
-
-\subsection ctrl_iface_GET_CAPABILITY GET_CAPABILITY <option> [strict]
-
-Get list of supported functionality (eap, pairwise, group,
-proto). Supported functionality is shown as space separate lists of
-values used in the same format as in %wpa_supplicant configuration.
-If optional argument, 'strict', is added, only the values that the
-driver claims to explicitly support are included. Without this, all
-available capabilities are included if the driver does not provide
-a mechanism for querying capabilities.
-
-Example request/reply pairs:
-
-\verbatim
-GET_CAPABILITY eap
-AKA FAST GTC LEAP MD5 MSCHAPV2 OTP PAX PEAP PSK SIM TLS TTLS
-\endverbatim
-
-\verbatim
-GET_CAPABILITY pairwise
-CCMP TKIP NONE
-\endverbatim
-
-\verbatim
-GET_CAPABILITY pairwise strict
-\endverbatim
-
-\verbatim
-GET_CAPABILITY group
-CCMP TKIP WEP104 WEP40
-\endverbatim
-
-\verbatim
-GET_CAPABILITY key_mgmt
-WPA-PSK WPA-EAP IEEE8021X NONE
-\endverbatim
-
-\verbatim
-GET_CAPABILITY proto
-RSN WPA
-\endverbatim
-
-\verbatim
-GET_CAPABILITY auth_alg
-OPEN SHARED LEAP
-\endverbatim
-
-
-\subsection ctrl_iface_AP_SCAN AP_SCAN <ap_scan value>
-
-Change ap_scan value:
-0 = no scanning,
-1 = %wpa_supplicant requests scans and uses scan results to select the AP,
-2 = %wpa_supplicant does not use scanning and just requests driver to
-associate and take care of AP selection
-
-
-\subsection ctrl_iface_INTERFACES INTERFACES
-
-List configured interfaces.
-
-\verbatim
-wlan0
-eth0
-\endverbatim
-
-*/

wpa_supplicant/doc/doxygen.fast

@@ -1,239 +0,0 @@
-# Doxyfile 1.4.4
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME           = wpa_supplicant
-PROJECT_NUMBER         = 0.6.x
-OUTPUT_DIRECTORY       = wpa_supplicant/doc
-CREATE_SUBDIRS         = NO
-OUTPUT_LANGUAGE        = English
-BRIEF_MEMBER_DESC      = YES
-REPEAT_BRIEF           = YES
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-ALWAYS_DETAILED_SEC    = NO
-INLINE_INHERITED_MEMB  = NO
-FULL_PATH_NAMES        = YES
-STRIP_FROM_PATH        =
-STRIP_FROM_INC_PATH    = 
-SHORT_NAMES            = NO
-JAVADOC_AUTOBRIEF      = NO
-MULTILINE_CPP_IS_BRIEF = NO
-DETAILS_AT_TOP         = NO
-INHERIT_DOCS           = YES
-DISTRIBUTE_GROUP_DOC   = NO
-SEPARATE_MEMBER_PAGES  = NO
-TAB_SIZE               = 8
-ALIASES                = 
-OPTIMIZE_OUTPUT_FOR_C  = YES
-OPTIMIZE_OUTPUT_JAVA   = NO
-SUBGROUPING            = YES
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-EXTRACT_ALL            = NO
-EXTRACT_PRIVATE        = NO
-EXTRACT_STATIC         = NO
-EXTRACT_LOCAL_CLASSES  = YES
-EXTRACT_LOCAL_METHODS  = NO
-HIDE_UNDOC_MEMBERS     = NO
-HIDE_UNDOC_CLASSES     = NO
-HIDE_FRIEND_COMPOUNDS  = NO
-HIDE_IN_BODY_DOCS      = NO
-INTERNAL_DOCS          = NO
-CASE_SENSE_NAMES       = YES
-HIDE_SCOPE_NAMES       = NO
-SHOW_INCLUDE_FILES     = YES
-INLINE_INFO            = YES
-SORT_MEMBER_DOCS       = YES
-SORT_BRIEF_DOCS        = NO
-SORT_BY_SCOPE_NAME     = NO
-GENERATE_TODOLIST      = YES
-GENERATE_TESTLIST      = YES
-GENERATE_BUGLIST       = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS       = 
-MAX_INITIALIZER_LINES  = 30
-SHOW_USED_FILES        = YES
-SHOW_DIRECTORIES       = YES
-FILE_VERSION_FILTER    = 
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET                  = NO
-WARNINGS               = YES
-WARN_IF_UNDOCUMENTED   = NO
-WARN_IF_DOC_ERROR      = YES
-WARN_NO_PARAMDOC       = YES
-WARN_FORMAT            = "$file:$line: $text"
-WARN_LOGFILE           = 
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT                  = wpa_supplicant \
-	src/common \
-	src/crypto \
-	src/drivers \
-	src/eap_common \
-	src/eapol_supp \
-	src/eap_peer \
-	src/l2_packet \
-	src/rsn_supp \
-	src/tls \
-	src/utils \
-	src/wps
-FILE_PATTERNS          = *.c *.h *.cpp *.m *.doxygen
-RECURSIVE              = YES
-EXCLUDE                = wpa_supplicant/wpa_gui
-EXCLUDE_SYMLINKS       = NO
-EXCLUDE_PATTERNS       = */.moc/* */.ui/*
-EXAMPLE_PATH           = 
-EXAMPLE_PATTERNS       = *
-EXAMPLE_RECURSIVE      = NO
-IMAGE_PATH             = wpa_supplicant/doc
-INPUT_FILTER           = kerneldoc2doxygen.pl
-FILTER_PATTERNS        = 
-FILTER_SOURCE_FILES    = YES
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER         = YES
-INLINE_SOURCES         = NO
-STRIP_CODE_COMMENTS    = YES
-REFERENCED_BY_RELATION = NO
-REFERENCES_RELATION    = NO
-VERBATIM_HEADERS       = NO
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX     = YES
-COLS_IN_ALPHA_INDEX    = 3
-IGNORE_PREFIX          = 
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML          = YES
-HTML_OUTPUT            = html
-HTML_FILE_EXTENSION    = .html
-HTML_HEADER            = 
-HTML_FOOTER            = 
-HTML_STYLESHEET        = 
-HTML_ALIGN_MEMBERS     = YES
-GENERATE_HTMLHELP      = NO
-CHM_FILE               = 
-HHC_LOCATION           = 
-GENERATE_CHI           = NO
-BINARY_TOC             = NO
-TOC_EXPAND             = NO
-DISABLE_INDEX          = NO
-ENUM_VALUES_PER_LINE   = 4
-GENERATE_TREEVIEW      = NO
-TREEVIEW_WIDTH         = 250
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX         = NO
-LATEX_OUTPUT           = latex
-LATEX_CMD_NAME         = latex
-MAKEINDEX_CMD_NAME     = makeindex
-COMPACT_LATEX          = NO
-PAPER_TYPE             = a4wide
-EXTRA_PACKAGES         = 
-LATEX_HEADER           = 
-PDF_HYPERLINKS         = YES
-USE_PDFLATEX           = YES
-LATEX_BATCHMODE        = NO
-LATEX_HIDE_INDICES     = NO
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF           = NO
-RTF_OUTPUT             = rtf
-COMPACT_RTF            = NO
-RTF_HYPERLINKS         = NO
-RTF_STYLESHEET_FILE    = 
-RTF_EXTENSIONS_FILE    = 
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN           = NO
-MAN_OUTPUT             = man
-MAN_EXTENSION          = .3
-MAN_LINKS              = NO
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML           = NO
-XML_OUTPUT             = xml
-XML_SCHEMA             = 
-XML_DTD                = 
-XML_PROGRAMLISTING     = YES
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF   = NO
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-GENERATE_PERLMOD       = NO
-PERLMOD_LATEX          = NO
-PERLMOD_PRETTY         = YES
-PERLMOD_MAKEVAR_PREFIX = 
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING   = YES
-MACRO_EXPANSION        = NO
-EXPAND_ONLY_PREDEF     = NO
-SEARCH_INCLUDES        = YES
-INCLUDE_PATH           = 
-INCLUDE_FILE_PATTERNS  = 
-PREDEFINED             = IEEE8021X_EAPOL CONFIG_CTRL_IFACE
-EXPAND_AS_DEFINED      = 
-SKIP_FUNCTION_MACROS   = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references   
-#---------------------------------------------------------------------------
-TAGFILES               = 
-GENERATE_TAGFILE       = 
-ALLEXTERNALS           = NO
-EXTERNAL_GROUPS        = YES
-PERL_PATH              = /usr/bin/perl
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS         = NO
-HIDE_UNDOC_RELATIONS   = YES
-HAVE_DOT               = NO
-CLASS_GRAPH            = YES
-COLLABORATION_GRAPH    = YES
-GROUP_GRAPHS           = YES
-UML_LOOK               = NO
-TEMPLATE_RELATIONS     = NO
-INCLUDE_GRAPH          = YES
-INCLUDED_BY_GRAPH      = YES
-CALL_GRAPH             = YES
-GRAPHICAL_HIERARCHY    = YES
-DIRECTORY_GRAPH        = NO
-DOT_IMAGE_FORMAT       = png
-DOT_PATH               = 
-DOTFILE_DIRS           = 
-MAX_DOT_GRAPH_DEPTH    = 1000
-DOT_TRANSPARENT        = NO
-DOT_MULTI_TARGETS      = NO
-GENERATE_LEGEND        = YES
-DOT_CLEANUP            = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
-#---------------------------------------------------------------------------
-SEARCHENGINE           = NO

wpa_supplicant/doc/doxygen.full

@@ -1,239 +0,0 @@
-# Doxyfile 1.4.4
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME           = wpa_supplicant
-PROJECT_NUMBER         = 0.6.x
-OUTPUT_DIRECTORY       = wpa_supplicant/doc
-CREATE_SUBDIRS         = NO
-OUTPUT_LANGUAGE        = English
-BRIEF_MEMBER_DESC      = YES
-REPEAT_BRIEF           = YES
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-ALWAYS_DETAILED_SEC    = NO
-INLINE_INHERITED_MEMB  = NO
-FULL_PATH_NAMES        = YES
-STRIP_FROM_PATH        =
-STRIP_FROM_INC_PATH    = 
-SHORT_NAMES            = NO
-JAVADOC_AUTOBRIEF      = NO
-MULTILINE_CPP_IS_BRIEF = NO
-DETAILS_AT_TOP         = NO
-INHERIT_DOCS           = YES
-DISTRIBUTE_GROUP_DOC   = NO
-SEPARATE_MEMBER_PAGES  = NO
-TAB_SIZE               = 8
-ALIASES                = 
-OPTIMIZE_OUTPUT_FOR_C  = YES
-OPTIMIZE_OUTPUT_JAVA   = NO
-SUBGROUPING            = YES
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-EXTRACT_ALL            = NO
-EXTRACT_PRIVATE        = NO
-EXTRACT_STATIC         = NO
-EXTRACT_LOCAL_CLASSES  = YES
-EXTRACT_LOCAL_METHODS  = NO
-HIDE_UNDOC_MEMBERS     = NO
-HIDE_UNDOC_CLASSES     = NO
-HIDE_FRIEND_COMPOUNDS  = NO
-HIDE_IN_BODY_DOCS      = NO
-INTERNAL_DOCS          = NO
-CASE_SENSE_NAMES       = YES
-HIDE_SCOPE_NAMES       = NO
-SHOW_INCLUDE_FILES     = YES
-INLINE_INFO            = YES
-SORT_MEMBER_DOCS       = YES
-SORT_BRIEF_DOCS        = NO
-SORT_BY_SCOPE_NAME     = NO
-GENERATE_TODOLIST      = YES
-GENERATE_TESTLIST      = YES
-GENERATE_BUGLIST       = YES
-GENERATE_DEPRECATEDLIST= YES
-ENABLED_SECTIONS       = 
-MAX_INITIALIZER_LINES  = 30
-SHOW_USED_FILES        = YES
-SHOW_DIRECTORIES       = YES
-FILE_VERSION_FILTER    = 
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET                  = NO
-WARNINGS               = YES
-WARN_IF_UNDOCUMENTED   = NO
-WARN_IF_DOC_ERROR      = YES
-WARN_NO_PARAMDOC       = YES
-WARN_FORMAT            = "$file:$line: $text"
-WARN_LOGFILE           = 
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT                  = wpa_supplicant \
-	src/common \
-	src/crypto \
-	src/drivers \
-	src/eap_common \
-	src/eapol_supp \
-	src/eap_peer \
-	src/l2_packet \
-	src/rsn_supp \
-	src/tls \
-	src/utils \
-	src/wps
-FILE_PATTERNS          = *.c *.h *.cpp *.m *.doxygen
-RECURSIVE              = YES
-EXCLUDE                = wpa_supplicant/wpa_gui
-EXCLUDE_SYMLINKS       = NO
-EXCLUDE_PATTERNS       = */.moc/* */.ui/*
-EXAMPLE_PATH           = 
-EXAMPLE_PATTERNS       = *
-EXAMPLE_RECURSIVE      = NO
-IMAGE_PATH             = wpa_supplicant/doc
-INPUT_FILTER           = kerneldoc2doxygen.pl
-FILTER_PATTERNS        = 
-FILTER_SOURCE_FILES    = YES
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER         = YES
-INLINE_SOURCES         = NO
-STRIP_CODE_COMMENTS    = YES
-REFERENCED_BY_RELATION = NO
-REFERENCES_RELATION    = NO
-VERBATIM_HEADERS       = NO
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX     = YES
-COLS_IN_ALPHA_INDEX    = 3
-IGNORE_PREFIX          = 
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML          = YES
-HTML_OUTPUT            = html
-HTML_FILE_EXTENSION    = .html
-HTML_HEADER            = 
-HTML_FOOTER            = 
-HTML_STYLESHEET        = 
-HTML_ALIGN_MEMBERS     = YES
-GENERATE_HTMLHELP      = NO
-CHM_FILE               = 
-HHC_LOCATION           = 
-GENERATE_CHI           = NO
-BINARY_TOC             = NO
-TOC_EXPAND             = NO
-DISABLE_INDEX          = NO
-ENUM_VALUES_PER_LINE   = 4
-GENERATE_TREEVIEW      = NO
-TREEVIEW_WIDTH         = 250
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX         = YES
-LATEX_OUTPUT           = latex
-LATEX_CMD_NAME         = latex
-MAKEINDEX_CMD_NAME     = makeindex
-COMPACT_LATEX          = NO
-PAPER_TYPE             = a4wide
-EXTRA_PACKAGES         = 
-LATEX_HEADER           = 
-PDF_HYPERLINKS         = YES
-USE_PDFLATEX           = YES
-LATEX_BATCHMODE        = NO
-LATEX_HIDE_INDICES     = NO
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF           = NO
-RTF_OUTPUT             = rtf
-COMPACT_RTF            = NO
-RTF_HYPERLINKS         = NO
-RTF_STYLESHEET_FILE    = 
-RTF_EXTENSIONS_FILE    = 
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN           = NO
-MAN_OUTPUT             = man
-MAN_EXTENSION          = .3
-MAN_LINKS              = NO
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML           = NO
-XML_OUTPUT             = xml
-XML_SCHEMA             = 
-XML_DTD                = 
-XML_PROGRAMLISTING     = YES
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF   = NO
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-GENERATE_PERLMOD       = NO
-PERLMOD_LATEX          = NO
-PERLMOD_PRETTY         = YES
-PERLMOD_MAKEVAR_PREFIX = 
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING   = YES
-MACRO_EXPANSION        = NO
-EXPAND_ONLY_PREDEF     = NO
-SEARCH_INCLUDES        = YES
-INCLUDE_PATH           = 
-INCLUDE_FILE_PATTERNS  = 
-PREDEFINED             = IEEE8021X_EAPOL CONFIG_CTRL_IFACE
-EXPAND_AS_DEFINED      = 
-SKIP_FUNCTION_MACROS   = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references   
-#---------------------------------------------------------------------------
-TAGFILES               = 
-GENERATE_TAGFILE       = 
-ALLEXTERNALS           = NO
-EXTERNAL_GROUPS        = YES
-PERL_PATH              = /usr/bin/perl
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS         = NO
-HIDE_UNDOC_RELATIONS   = YES
-HAVE_DOT               = YES
-CLASS_GRAPH            = YES
-COLLABORATION_GRAPH    = YES
-GROUP_GRAPHS           = YES
-UML_LOOK               = NO
-TEMPLATE_RELATIONS     = NO
-INCLUDE_GRAPH          = YES
-INCLUDED_BY_GRAPH      = YES
-CALL_GRAPH             = YES
-GRAPHICAL_HIERARCHY    = YES
-DIRECTORY_GRAPH        = NO
-DOT_IMAGE_FORMAT       = png
-DOT_PATH               = 
-DOTFILE_DIRS           = 
-MAX_DOT_GRAPH_DEPTH    = 1000
-DOT_TRANSPARENT        = NO
-DOT_MULTI_TARGETS      = NO
-GENERATE_LEGEND        = YES
-DOT_CLEANUP            = YES
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
-#---------------------------------------------------------------------------
-SEARCHENGINE           = YES

wpa_supplicant/doc/driver_wrapper.doxygen

@@ -1,180 +0,0 @@
-/**
-\page driver_wrapper Driver wrapper implementation (driver.h, drivers.c)
-
-All hardware and driver dependent functionality is in separate C files
-that implement defined wrapper functions. Other parts
-of the %wpa_supplicant are designed to be hardware, driver, and operating
-system independent.
-
-Driver wrappers need to implement whatever calls are used in the
-target operating system/driver for controlling wireless LAN
-devices. As an example, in case of Linux, these are mostly some glue
-code and ioctl() calls and netlink message parsing for Linux Wireless
-Extensions (WE). Since features required for WPA were added only recently to
-Linux Wireless Extensions (in version 18), some driver specific code is used
-in number of driver interface implementations. These driver dependent parts
-can be replaced with generic code in driver_wext.c once the target driver
-includes full support for WE-18. After that, all Linux drivers, at
-least in theory, could use the same driver wrapper code.
-
-A driver wrapper needs to implement some or all of the functions
-defined in driver.h. These functions are registered by filling struct
-wpa_driver_ops with function pointers. Hardware independent parts of
-%wpa_supplicant will call these functions to control the driver/wlan
-card. In addition, support for driver events is required. The event
-callback function, wpa_supplicant_event(), and its parameters are
-documented in driver.h. In addition, a pointer to the 'struct
-wpa_driver_ops' needs to be registered in drivers.c file.
-
-When porting to other operating systems, the driver wrapper should be
-modified to use the native interface of the target OS. It is possible
-that some extra requirements for the interface between the driver
-wrapper and generic %wpa_supplicant code are discovered during porting
-to a new operating system. These will be addressed on case by case
-basis by modifying the interface and updating the other driver
-wrappers for this. The goal is to avoid changing this interface
-without very good reasons in order to limit the number of changes
-needed to other wrappers and hardware independent parts of
-%wpa_supplicant. When changes are required, recommended way is to
-make them in backwards compatible way that allows existing driver
-interface implementations to be compiled without any modification.
-
-Generic Linux Wireless Extensions functions are implemented in
-driver_wext.c. All Linux driver wrappers can use these when the kernel
-driver supports the generic ioctl()s and wireless events. Driver
-specific functions are implemented in separate C files, e.g.,
-driver_hostap.c. These files need to define struct wpa_driver_ops
-entry that will be used in wpa_supplicant.c when calling driver
-functions. struct wpa_driver_ops entries are registered in drivers.c.
-
-In general, it is likely to be useful to first take a look at couple
-of driver interface examples before starting on implementing a new
-one. driver_hostap.c and driver_wext.c include a complete
-implementation for Linux drivers that use %wpa_supplicant-based control
-of WPA IE and roaming. driver_ndis.c (with help from driver_ndis_.c)
-is an example of a complete interface for Windows NDIS interface for
-drivers that generate WPA IE themselves and decide when to roam. These
-example implementations include full support for all security modes.
-
-
-\section driver_req Driver requirements for WPA
-
-WPA introduces new requirements for the device driver. At least some
-of these need to be implemented in order to provide enough support for
-%wpa_supplicant.
-
-\subsection driver_tkip_ccmp TKIP/CCMP
-
-WPA requires that the pairwise cipher suite (encryption algorithm for
-unicast data packets) is TKIP or CCMP. These are new encryption
-protocols and thus, the driver will need to be modified to support
-them. Depending on the used wlan hardware, some parts of these may be
-implemented by the hardware/firmware.
-
-Specification for both TKIP and CCMP is available from IEEE (IEEE
-802.11i amendment). Fully functional, hardware independent
-implementation of both encryption protocols is also available in Host
-AP driver (driver/modules/hostap_{tkip,ccmp}.c). In addition, Linux 2.6
-kernel tree has generic implementations for WEP, TKIP, and CCMP that can
-be used in Linux drivers.
-
-The driver will also need to provide configuration mechanism to allow
-user space programs to configure TKIP and CCMP. Linux Wireless Extensions
-v18 added support for configuring these algorithms and
-individual/non-default keys. If the target kernel does not include WE-18,
-private ioctls can be used to provide similar functionality.
-
-\subsection driver_roaming Roaming control and scanning support
-
-%wpa_supplicant can optionally control AP selection based on the
-information received from Beacon and/or Probe Response frames
-(ap_scan=1 mode in configuration). This means that the driver should
-support external control for scan process. In case of Linux, use of
-new Wireless Extensions scan support (i.e., 'iwlist wlan0 scan') is
-recommended. The current driver wrapper (driver_wext.c) uses this for
-scan results.
-
-Scan results must also include the WPA information element. Support for
-this was added in WE-18. With older versions, a custom event can be used
-to provide the full WPA IE (including element id and length) as a hex
-string that is included in the scan results.
-
-%wpa_supplicant needs to also be able to request the driver to
-associate with a specific BSS. Current Host AP driver and matching
-driver_hostap.c wrapper uses following sequence for this
-request. Similar/identical mechanism should be usable also with other
-drivers.
-
-- set WPA IE for AssocReq with private ioctl
-- set SSID with SIOCSIWESSID
-- set channel/frequency with SIOCSIWFREQ
-- set BSSID with SIOCSIWAP
-  (this last ioctl will trigger the driver to request association)
-
-\subsection driver_wpa_ie WPA IE generation
-
-%wpa_supplicant selects which cipher suites and key management suites
-are used. Based on this information, it generates a WPA IE. This is
-provided to the driver interface in the associate call. This does not
-match with Windows NDIS drivers which generate the WPA IE
-themselves.
-
-%wpa_supplicant allows Windows NDIS-like behavior by providing the
-selected cipher and key management suites in the associate call. If
-the driver generates its own WPA IE and that differs from the one
-generated by %wpa_supplicant, the driver has to inform %wpa_supplicant
-about the used WPA IE (i.e., the one it used in (Re)Associate
-Request). This notification is done using EVENT_ASSOCINFO event (see
-driver.h). %wpa_supplicant is normally configured to use
-ap_scan=2 mode with drivers that control WPA IE generation and roaming.
-
-\subsection driver_events Driver events
-
-%wpa_supplicant needs to receive event callbacks when certain events
-occur (association, disassociation, Michael MIC failure, scan results
-available, PMKSA caching candidate). These events and the callback
-details are defined in driver.h (wpa_supplicant_event() function
-and enum wpa_event_type).
-
-On Linux, association and disassociation can use existing Wireless
-Extensions event that is reporting new AP with SIOCGIWAP
-event. Similarly, completion of a scan can be reported with SIOCGIWSCAN
-event.
-
-Michael MIC failure event was added in WE-18. Older versions of Wireless
-Extensions will need to use a custom event. Host AP driver used a custom
-event with following contents: MLME-MICHAELMICFAILURE.indication(keyid=#
-broadcast/unicast addr=addr2). This is the recommended format until
-the driver can be moved to use WE-18 mechanism.
-
-\subsection driver_wext_summary Summary of Linux Wireless Extensions use
-
-AP selection depends on ap_scan configuration:
-
-ap_scan=1:
-
-- %wpa_supplicant requests scan with SIOCSIWSCAN
-- driver reports scan complete with wireless event SIOCGIWSCAN
-- %wpa_supplicant reads scan results with SIOCGIWSCAN (multiple call if
-  a larget buffer is needed)
-- %wpa_supplicant decides which AP to use based on scan results
-- %wpa_supplicant configures driver to associate with the selected BSS
-  (SIOCSIWMODE, SIOCSIWGENIE, SIOCSIWAUTH, SIOCSIWFREQ,
-   SIOCSIWESSID, SIOCSIWAP)
-
-ap_scan=2:
-
-- %wpa_supplicant configures driver to associate with an SSID
-  (SIOCSIWMODE, SIOCSIWGENIE, SIOCSIWAUTH, SIOCSIWESSID)
-
-
-After this, both modes use similar steps:
-
-- optionally (or required for drivers that generate WPA/RSN IE for
-  (Re)AssocReq), driver reports association parameters (AssocReq IEs)
-  with wireless event IWEVASSOCREQIE (and optionally IWEVASSOCRESPIE)
-- driver reports association with wireless event SIOCGIWAP
-- %wpa_supplicant takes care of EAPOL frame handling (validating
-  information from associnfo and if needed, from scan results if WPA/RSN
-  IE from the Beacon frame is not reported through associnfo)
-*/

wpa_supplicant/doc/eap.doxygen

@@ -1,87 +0,0 @@
-/**
-\page eap_module EAP peer implementation
-
-Extensible Authentication Protocol (EAP) is an authentication framework
-defined in RFC 3748. %wpa_supplicant uses a separate code module for EAP
-peer implementation. This module was designed to use only a minimal set
-of direct function calls (mainly, to debug/event functions) in order for
-it to be usable in other programs. The design of the EAP
-implementation is based loosely on RFC 4137. The state machine is
-defined in this RFC and so is the interface between the peer state
-machine and methods. As such, this RFC provides useful information for
-understanding the EAP peer implementation in %wpa_supplicant.
-
-Some of the terminology used in EAP state machine is referring to
-EAPOL (IEEE 802.1X), but there is no strict requirement on the lower
-layer being IEEE 802.1X if EAP module is built for other programs than
-%wpa_supplicant. These terms should be understood to refer to the
-lower layer as defined in RFC 4137.
-
-
-\section adding_eap_methods Adding EAP methods
-
-Each EAP method is implemented as a separate module, usually as one C
-file named eap_<name of the method>.c, e.g., eap_md5.c. All EAP
-methods use the same interface between the peer state machine and
-method specific functions. This allows new EAP methods to be added
-without modifying the core EAP state machine implementation.
-
-New EAP methods need to be registered by adding them into the build
-(Makefile) and the EAP method registration list in the
-eap_peer_register_methods() function of eap_methods.c. Each EAP
-method should use a build-time configuration option, e.g., EAP_TLS, in
-order to make it possible to select which of the methods are included
-in the build.
-
-EAP methods must implement the interface defined in eap_i.h. struct
-eap_method defines the needed function pointers that each EAP method
-must provide. In addition, the EAP type and name are registered using
-this structure. This interface is based on section 4.4 of RFC 4137.
-
-It is recommended that the EAP methods would use generic helper
-functions, eap_msg_alloc() and eap_hdr_validate() when processing
-messages. This allows code sharing and can avoid missing some of the
-needed validation steps for received packets. In addition, these
-functions make it easier to change between expanded and legacy EAP
-header, if needed.
-
-When adding an EAP method that uses a vendor specific EAP type
-(Expanded Type as defined in RFC 3748, Chapter 5.7), the new method
-must be registered by passing vendor id instead of EAP_VENDOR_IETF to
-eap_peer_method_alloc(). These methods must not try to emulate
-expanded types by registering a legacy EAP method for type 254. See
-eap_vendor_test.c for an example of an EAP method implementation that
-is implemented as an expanded type.
-
-
-\section used_eap_library Using EAP implementation as a library
-
-The Git repository has an eap_example directory that contains an
-example showing how EAP peer and server code from %wpa_supplicant and
-hostapd can be used as a library. The example program initializes both
-an EAP server and an EAP peer entities and then runs through an
-EAP-PEAP/MSCHAPv2 authentication.
-
-eap_example_peer.c shows the initialization and glue code needed to
-control the EAP peer implementation. eap_example_server.c does the
-same for EAP server. eap_example.c is an example that ties in both the
-EAP server and client parts to allow an EAP authentication to be
-shown.
-
-In this example, the EAP messages are passed between the server and
-the peer are passed by direct function calls within the same process.
-In practice, server and peer functionalities would likely reside in
-separate devices and the EAP messages would be transmitted between the
-devices based on an external protocol. For example, in IEEE 802.11
-uses IEEE 802.1X EAPOL state machines to control the transmission of
-EAP messages and WiMax supports optional PMK EAP authentication
-mechanism that transmits EAP messages as defined in IEEE 802.16e.
-
-The EAP library links in number of helper functions from src/utils and
-src/crypto directories. Most of these are suitable as-is, but it may
-be desirable to replace the debug output code in src/utils/wpa_debug.c
-by dropping this file from the library and re-implementing the
-functions there in a way that better fits in with the main
-application.
-
-*/

wpa_supplicant/doc/mainpage.doxygen

@@ -1,56 +0,0 @@
-/**
-\mainpage Developers' documentation for wpa_supplicant
-
-%wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with
-support for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE
-802.1X/WPA component that is used in the client stations. It
-implements key negotiation with a WPA Authenticator and it can optionally
-control roaming and IEEE 802.11 authentication/association of the wlan
-driver.
-
-The goal of this documentation and comments in the source code is to
-give enough information for other developers to understand how
-%wpa_supplicant has been implemented, how it can be modified, how new
-drivers can be supported, and how %wpa_supplicant can be ported to
-other operating systems. If any information is missing, feel free to
-contact Jouni Malinen <j@w1.fi> for more
-information. Contributions as patch files are also very welcome at the
-same address. Please note that %wpa_supplicant is licensed under dual
-license, GPLv2 or BSD at user's choice. All contributions to
-%wpa_supplicant are expected to use compatible licensing terms.
-
-The source code and read-only access to %wpa_supplicant Git repository
-is available from the project home page at
-http://w1.fi/wpa_supplicant/. This developers' documentation
-is also available as a PDF file from
-http://w1.fi/wpa_supplicant/wpa_supplicant-devel.pdf .
-
-The design goal for %wpa_supplicant was to use hardware, driver, and
-OS independent, portable C code for all WPA functionality. The source
-code is divided into separate C files as shown on the \ref
-code_structure "code structure page". All hardware/driver specific
-functionality is in separate files that implement a \ref
-driver_wrapper "well-defined driver API". Information about porting
-to different target boards and operating systems is available on
-the \ref porting "porting page".
-
-EAPOL (IEEE 802.1X) state machines are implemented as a separate
-module that interacts with \ref eap_module "EAP peer implementation".
-In addition to programs aimed at normal production use,
-%wpa_supplicant source tree includes number of \ref testing_tools
-"testing and development tools" that make it easier to test the
-programs without having to setup a full test setup with wireless
-cards. These tools can also be used to implement automatic test
-suites.
-
-%wpa_supplicant implements a
-\ref ctrl_iface_page "control interface" that can be used by
-external programs to control the operations of the %wpa_supplicant
-daemon and to get status information and event notifications. There is
-a small C library that provides helper functions to facilitate the use of the
-control interface. This library can also be used with C++.
-
-\image html wpa_supplicant.png "wpa_supplicant modules"
-\image latex wpa_supplicant.eps "wpa_supplicant modules" width=15cm
-
-*/

wpa_supplicant/doc/porting.doxygen

@@ -1,208 +0,0 @@
-/**
-\page porting Porting to different target boards and operating systems
-
-%wpa_supplicant was designed to be easily portable to different
-hardware (board, CPU) and software (OS, drivers) targets. It is
-already used with number of operating systems and numerous wireless
-card models and drivers. The main %wpa_supplicant repository includes
-support for Linux, FreeBSD, and Windows. In addition, the code has been
-ported to number of other operating systems like VxWorks, PalmOS,
-Windows CE, and Windows Mobile. On the hardware
-side, %wpa_supplicant is used on various systems: desktops, laptops,
-PDAs, and embedded devices with CPUs including x86, PowerPC,
-arm/xscale, and MIPS. Both big and little endian configurations are
-supported.
-
-
-\section ansi_c_extra Extra functions on top of ANSI C
-
-%wpa_supplicant is mostly using ANSI C functions that are available on
-most targets. However, couple of additional functions that are common
-on modern UNIX systems are used. Number of these are listed with
-prototypes in common.h (the \verbatim #ifdef CONFIG_ANSI_C_EXTRA \endverbatim
-block). These functions may need to be implemented or at least defined
-as macros to native functions in the target OS or C library.
-
-Many of the common ANSI C functions are used through a wrapper
-definitions in os.h to allow these to be replaced easily with a
-platform specific version in case standard C libraries are not
-available. In addition, os.h defines couple of common platform
-specific functions that are implemented in os_unix.c for UNIX like
-targets and in os_win32.c for Win32 API. If the target platform does
-not support either of these examples, a new os_*.c file may need to be
-added.
-
-Unless OS_NO_C_LIB_DEFINES is defined, the standard ANSI C and POSIX
-functions are used by defining the os_*() wrappers to use them
-directly in order to avoid extra cost in size and speed. If the target
-platform needs different versions of the functions, os.h can be
-modified to define the suitable macros or alternatively,
-OS_NO_C_LIB_DEFINES may be defined for the build and the wrapper
-functions can then be implemented in a new os_*.c wrapper file.
-
-common.h defines number of helper macros for handling integers of
-different size and byte order. Suitable version of these definitions
-may need to be added for the target platform.
-
-
-\section configuration_backend Configuration backend
-
-%wpa_supplicant implements a configuration interface that allows the
-backend to be easily replaced in order to read configuration data from
-a suitable source depending on the target platform. config.c
-implements the generic code that can be shared with all configuration
-backends. Each backend is implemented in its own config_*.c file.
-
-The included config_file.c backend uses a text file for configuration
-and config_winreg.c uses Windows registry. These files can be used as
-an example for a new configuration backend if the target platform uses
-different mechanism for configuration parameters. In addition,
-config_none.c can be used as an empty starting point for building a
-new configuration backend.
-
-
-\section driver_iface_porting Driver interface
-
-Unless the target OS and driver is already supported, most porting
-projects have to implement a driver wrapper. This may be done by
-adding a new driver interface module or modifying an existing module
-(driver_*.c) if the new target is similar to one of them. \ref
-driver_wrapper "Driver wrapper implementation" describes the details
-of the driver interface and discusses the tasks involved in porting
-this part of %wpa_supplicant.
-
-
-\section l2_packet_porting l2_packet (link layer access)
-
-%wpa_supplicant needs to have access to sending and receiving layer 2
-(link layer) packets with two Ethertypes: EAP-over-LAN (EAPOL) 0x888e
-and RSN pre-authentication 0x88c7. l2_packet.h defines the interfaces
-used for this in the core %wpa_supplicant implementation.
-
-If the target operating system supports a generic mechanism for link
-layer access, that is likely the best mechanism for providing the
-needed functionality for %wpa_supplicant. Linux packet socket is an
-example of such a generic mechanism. If this is not available, a
-separate interface may need to be implemented to the network stack or
-driver. This is usually an intermediate or protocol driver that is
-operating between the device driver and the OS network stack. If such
-a mechanism is not feasible, the interface can also be implemented
-directly in the device driver.
-
-The main %wpa_supplicant repository includes l2_packet implementations
-for Linux using packet sockets (l2_packet_linux.c), more portable
-version using libpcap/libdnet libraries (l2_packet_pcap.c; this
-supports WinPcap, too), and FreeBSD specific version of libpcap
-interface (l2_packet_freebsd.c).
-
-If the target operating system is supported by libpcap (receiving) and
-libdnet (sending), l2_packet_pcap.c can likely be used with minimal or
-no changes. If this is not a case or a proprietary interface for link
-layer is required, a new l2_packet module may need to be
-added. Alternatively, struct wpa_driver_ops::send_eapol() handler can
-be used to override the l2_packet library if the link layer access is
-integrated with the driver interface implementation.
-
-
-\section eloop_porting Event loop
-
-%wpa_supplicant uses a single process/thread model and an event loop
-to provide callbacks on events (registered timeout, received packet,
-signal). eloop.h defines the event loop interface. eloop.c is an
-implementation of such an event loop using select() and sockets. This
-is suitable for most UNIX/POSIX systems. When porting to other
-operating systems, it may be necessary to replace that implementation
-with OS specific mechanisms that provide similar functionality.
-
-
-\section ctrl_iface_porting Control interface
-
-%wpa_supplicant uses a \ref ctrl_iface_page "control interface"
-to allow external processed
-to get status information and to control the operations. Currently,
-this is implemented with socket based communication; both UNIX domain
-sockets and UDP sockets are supported. If the target OS does not
-support sockets, this interface will likely need to be modified to use
-another mechanism like message queues. The control interface is
-optional component, so it is also possible to run %wpa_supplicant
-without porting this part.
-
-The %wpa_supplicant side of the control interface is implemented in
-ctrl_iface.c. Matching client side is implemented as a control
-interface library in wpa_ctrl.c.
-
-
-\section entry_point Program entry point
-
-%wpa_supplicant defines a set of functions that can be used to
-initialize main supplicant processing. Each operating system has a
-mechanism for starting new processing or threads. This is usually a
-function with a specific set of arguments and calling convention. This
-function is responsible on initializing %wpa_supplicant.
-
-main.c includes an entry point for UNIX-like operating system, i.e.,
-main() function that uses command line arguments for setting
-parameters for %wpa_supplicant. When porting to other operating
-systems, similar OS-specific entry point implementation is needed. It
-can be implemented in a new file that is then linked with
-%wpa_supplicant instead of main.o. main.c is also a good example on
-how the initialization process should be done.
-
-The supplicant initialization functions are defined in
-wpa_supplicant_i.h. In most cases, the entry point function should
-start by fetching configuration parameters. After this, a global
-%wpa_supplicant context is initialized with a call to
-wpa_supplicant_init(). After this, existing network interfaces can be
-added with wpa_supplicant_add_iface(). wpa_supplicant_run() is then
-used to start the main event loop. Once this returns at program
-termination time, wpa_supplicant_deinit() is used to release global
-context data.
-
-wpa_supplicant_add_iface() and wpa_supplicant_remove_iface() can be
-used dynamically to add and remove interfaces based on when
-%wpa_supplicant processing is needed for them. This can be done, e.g.,
-when hotplug network adapters are being inserted and ejected. It is
-also possible to do this when a network interface is being
-enabled/disabled if it is desirable that %wpa_supplicant processing
-for the interface is fully enabled/disabled at the same time.
-
-
-\section simple_build Simple build example
-
-One way to start a porting project is to begin with a very simple
-build of %wpa_supplicant with WPA-PSK support and once that is
-building correctly, start adding features.
-
-Following command can be used to build very simple version of
-%wpa_supplicant:
-
-\verbatim
-cc -o wpa_supplicant config.c eloop.c common.c md5.c rc4.c sha1.c \
-	config_none.c l2_packet_none.c tls_none.c wpa.c preauth.c \
-	aes_wrap.c wpa_supplicant.c events.c main_none.c drivers.c
-\endverbatim
-
-The end result is not really very useful since it uses empty functions
-for configuration parsing and layer 2 packet access and does not
-include a driver interface. However, this is a good starting point
-since the build is complete in the sense that all functions are
-present and this is easy to configure to a build system by just
-including the listed C files.
-
-Once this version can be build successfully, the end result can be
-made functional by adding a proper program entry point (main*.c),
-driver interface (driver_*.c and matching CONFIG_DRIVER_* define for
-registration in drivers.c), configuration parser/writer (config_*.c),
-and layer 2 packet access implementation (l2_packet_*.c). After these
-components have been added, the end result should be a working
-WPA/WPA2-PSK enabled supplicant.
-
-After the basic functionality has been verified to work, more features
-can be added by linking in more files and defining C pre-processor
-defines. Currently, the best source of information for what options
-are available and which files needs to be included is in the Makefile
-used for building the supplicant with make. Similar configuration will
-be needed for build systems that either use different type of make
-tool or a GUI-based project configuration.
-
-*/

wpa_supplicant/doc/testing_tools.doxygen

@@ -1,295 +0,0 @@
-/**
-\page testing_tools Testing and development tools
-
-[ \ref eapol_test "eapol_test" |
-\ref preauth_test "preauth_test" |
-\ref driver_test "driver_test" |
-\ref unit_tests "Unit tests" ]
-
-%wpa_supplicant source tree includes number of testing and development
-tools that make it easier to test the programs without having to setup
-a full test setup with wireless cards. In addition, these tools can be
-used to implement automatic tests suites.
-
-\section eapol_test eapol_test - EAP peer and RADIUS client testing
-
-eapol_test is a program that links together the same EAP peer
-implementation that %wpa_supplicant is using and the RADIUS
-authentication client code from hostapd. In addition, it has minimal
-glue code to combine these two components in similar ways to IEEE
-802.1X/EAPOL Authenticator state machines. In other words, it
-integrates IEEE 802.1X Authenticator (normally, an access point) and
-IEEE 802.1X Supplicant (normally, a wireless client) together to
-generate a single program that can be used to test EAP methods without
-having to setup an access point and a wireless client.
-
-The main uses for eapol_test are in interoperability testing of EAP
-methods against RADIUS servers and in development testing for new EAP
-methods. It can be easily used to automate EAP testing for
-interoperability and regression since the program can be run from
-shell scripts without require additional test components apart from a
-RADIUS server. For example, the automated EAP tests described in
-eap_testing.txt are implemented with eapol_test. Similarly, eapol_test
-could be used to implement an automated regression test suite for a
-RADIUS authentication server.
-
-eapol_test uses the same build time configuration file, .config, as
-%wpa_supplicant. This file is used to select which EAP methods are
-included in eapol_test. This program is not built with the default
-Makefile target, so a separate make command needs to be used to
-compile the tool:
-
-\verbatim
-make eapol_test
-\endverbatim
-
-The resulting eapol_test binary has following command like options:
-
-\verbatim
-usage:
-eapol_test [-nWS] -c<conf> [-a<AS IP>] [-p<AS port>] [-s<AS secret>] \
-           [-r<count>] [-t<timeout>] [-C<Connect-Info>] \
-           [-M<client MAC address>]
-eapol_test scard
-eapol_test sim <PIN> <num triplets> [debug]
-
-options:
-  -c<conf> = configuration file
-  -a<AS IP> = IP address of the authentication server, default 127.0.0.1
-  -p<AS port> = UDP port of the authentication server, default 1812
-  -s<AS secret> = shared secret with the authentication server, default 'radius'
-  -r<count> = number of re-authentications
-  -W = wait for a control interface monitor before starting
-  -S = save configuration after authentiation
-  -n = no MPPE keys expected
-  -t<timeout> = sets timeout in seconds (default: 30 s)
-  -C<Connect-Info> = RADIUS Connect-Info (default: CONNECT 11Mbps 802.11b)
-  -M<client MAC address> = Set own MAC address (Calling-Station-Id,
-                           default: 02:00:00:00:00:01)
-\endverbatim
-
-
-As an example,
-\verbatim
-eapol_test -ctest.conf -a127.0.0.1 -p1812 -ssecret -r1
-\endverbatim
-tries to complete EAP authentication based on the network
-configuration from test.conf against the RADIUS server running on the
-local host. A re-authentication is triggered to test fast
-re-authentication. The configuration file uses the same format for
-network blocks as %wpa_supplicant.
-
-
-\section preauth_test preauth_test - WPA2 pre-authentication and EAP peer testing
-
-preauth_test is similar to eapol_test in the sense that in combines
-EAP peer implementation with something else, in this case, with WPA2
-pre-authentication. This tool can be used to test pre-authentication
-based on the code that %wpa_supplicant is using. As such, it tests
-both the %wpa_supplicant implementation and the functionality of an
-access point.
-
-preauth_test is built with:
-
-\verbatim
-make preauth_test
-\endverbatim
-
-and it uses following command line arguments:
-
-\verbatim
-usage: preauth_test <conf> <target MAC address> <ifname>
-\endverbatim
-
-For example,
-\verbatim
-preauth_test test.conf 02:11:22:33:44:55 eth0
-\endverbatim
-would use network configuration from test.conf to try to complete
-pre-authentication with AP using BSSID 02:11:22:33:44:55. The
-pre-authentication packets would be sent using the eth0 interface.
-
-
-\section driver_test driver_test - driver interface for testing wpa_supplicant
-
-%wpa_supplicant was designed to support number of different ways to
-communicate with a network device driver. This design uses \ref
-driver_wrapper "driver interface API" and number of driver interface
-implementations. One of these is driver_test.c, i.e., a test driver
-interface that is actually not using any drivers. Instead, it provides
-a mechanism for running %wpa_supplicant without having to have a
-device driver or wireless LAN hardware for that matter.
-
-driver_test can be used to talk directly with hostapd's driver_test
-component to create a test setup where one or more clients and access
-points can be tested within one test host and without having to have
-multiple wireless cards. This makes it easier to test the core code in
-%wpa_supplicant, and hostapd for that matter. Since driver_test uses
-the same driver API than any other driver interface implementation,
-the core code of %wpa_supplicant and hostapd can be tested with the
-same coverage as one would get when using real wireless cards. The
-only area that is not tested is the driver interface implementation
-(driver_*.c).
-
-Having the possibility to use simulated network components makes it
-much easier to do development testing while adding new features and to
-reproduce reported bugs. As such, it is often easiest to just do most
-of the development and bug fixing without using real hardware. Once
-the driver_test setup has been used to implement a new feature or fix
-a bug, the end result can be verified with wireless LAN cards. In many
-cases, this may even be unnecessary, depending on what area the
-feature/bug is relating to. Of course, changes to driver interfaces
-will still require use of real hardware.
-
-Since multiple components can be run within a single host, testing of
-complex network configuration, e.g., large number of clients
-association with an access point, becomes quite easy. All the tests
-can also be automated without having to resort to complex test setup
-using remote access to multiple computers.
-
-driver_test can be included in the %wpa_supplicant build in the same
-way as any other driver interface, i.e., by adding the following line
-into .config:
-
-\verbatim
-CONFIG_DRIVER_TEST=y
-\endverbatim
-
-When running %wpa_supplicant, the test interface is selected by using
-\a -Dtest command line argument. The interface name (\a -i argument)
-can be selected arbitrarily, i.e., it does not need to match with any
-existing network interface. The interface name is used to generate a
-MAC address, so when using multiple clients, each should use a
-different interface, e.g., \a sta1, \a sta2, and so on.
-
-%wpa_supplicant and hostapd are configured in the same way as they
-would be for normal use. Following example shows a simple test setup
-for WPA-PSK.
-
-hostapd is configured with following psk-test.conf configuration file:
-
-\verbatim
-driver=test
-
-interface=ap1
-logger_stdout=-1
-logger_stdout_level=0
-debug=2
-dump_file=/tmp/hostapd.dump
-
-test_socket=/tmp/Test/ap1
-
-ssid=jkm-test-psk
-
-wpa=1
-wpa_key_mgmt=WPA-PSK
-wpa_pairwise=TKIP
-wpa_passphrase=12345678
-\endverbatim
-
-and started with following command:
-
-\verbatim
-hostapd psk-test.conf
-\endverbatim
-
-%wpa_supplicant uses following configuration file:
-
-\verbatim
-driver_param=test_socket=/tmp/Test/ap1
-
-network={
-    ssid="jkm-test-psk"
-    key_mgmt=WPA-PSK
-    psk="12345678"
-}
-\endverbatim
-
-%wpa_supplicant can then be started with following command:
-
-\verbatim
-wpa_supplicant -Dtest -cpsk-test.conf -ista1 -ddK
-\endverbatim
-
-If run without debug information, i.e., with
-
-\verbatim
-wpa_supplicant -Dtest -cpsk-test.conf -ista1
-\endverbatim
-
-%wpa_supplicant completes authentication and prints following events:
-
-\verbatim
-Trying to associate with 02:b8:a6:62:08:5a (SSID='jkm-test-psk' freq=0 MHz)
-Associated with 02:b8:a6:62:08:5a
-WPA: Key negotiation completed with 02:b8:a6:62:08:5a [PTK=TKIP GTK=TKIP]
-CTRL-EVENT-CONNECTED - Connection to 02:b8:a6:62:08:5a completed (auth)
-\endverbatim
-
-If test setup is using multiple clients, it is possible to run
-multiple %wpa_supplicant processes. Alternatively, the support for
-multiple interfaces can be used with just one process to save some
-resources on single-CPU systems. For example, following command runs
-two clients:
-
-\verbatim
-./wpa_supplicant -Dtest -cpsk-test.conf -ista1 \
-	-N -Dtest -cpsk-test.conf -ista2
-\endverbatim
-
-This shows following event log:
-
-\verbatim
-Trying to associate with 02:b8:a6:62:08:5a (SSID='jkm-test-psk' freq=0 MHz)
-Associated with 02:b8:a6:62:08:5a
-WPA: Key negotiation completed with 02:b8:a6:62:08:5a [PTK=TKIP GTK=TKIP]
-CTRL-EVENT-CONNECTED - Connection to 02:b8:a6:62:08:5a completed (auth)
-Trying to associate with 02:b8:a6:62:08:5a (SSID='jkm-test-psk' freq=0 MHz)
-Associated with 02:b8:a6:62:08:5a
-WPA: Key negotiation completed with 02:b8:a6:62:08:5a [PTK=TKIP GTK=TKIP]
-CTRL-EVENT-CONNECTED - Connection to 02:b8:a6:62:08:5a completed (auth)
-\endverbatim
-
-hostapd shows this with following events:
-
-\verbatim
-ap1: STA 02:b5:64:63:30:63 IEEE 802.11: associated
-ap1: STA 02:b5:64:63:30:63 WPA: pairwise key handshake completed (WPA)
-ap1: STA 02:b5:64:63:30:63 WPA: group key handshake completed (WPA)
-ap1: STA 02:2a:c4:18:5b:f3 IEEE 802.11: associated
-ap1: STA 02:2a:c4:18:5b:f3 WPA: pairwise key handshake completed (WPA)
-ap1: STA 02:2a:c4:18:5b:f3 WPA: group key handshake completed (WPA)
-\endverbatim
-
-By default, driver_param is simulating a driver that uses the WPA/RSN
-IE generated by %wpa_supplicant. Driver-generated IE and AssocInfo
-events can be tested by adding \a use_associnfo=1 to the \a driver_param
-line in the configuration file. For example:
-
-\verbatim
-driver_param=test_socket=/tmp/Test/ap1 use_associnfo=1
-\endverbatim
-
-
-\section unit_tests Unit tests
-
-Number of the components (.c files) used in %wpa_supplicant define
-their own unit tests for automated validation of the basic
-functionality. Most of the tests for cryptographic algorithms are
-using standard test vectors to validate functionality. These tests can
-be useful especially when verifying port to a new CPU target.
-
-In most cases, these tests are implemented in the end of the same file
-with functions that are normally commented out, but ca be included by
-defining a pre-processor variable when building the file separately.
-The details of the needed build options are included in the Makefile
-(test-* targets). All automated unit tests can be run with
-
-\verbatim
-make tests
-\endverbatim
-
-This make target builds and runs each test and terminates with zero
-exit code if all tests were completed successfully.
-
-*/

wpa_supplicant/doc/wpa_supplicant.fig

@@ -1,247 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-6 1875 4050 2925 4350
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 1875 4050 2925 4050 2925 4350 1875 4350 1875 4050
-4 0 0 50 -1 0 12 0.0000 4 180 735 2025 4275 l2_packet\001
--6
-6 3450 1200 4275 1500
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 3450 1200 4275 1200 4275 1500 3450 1500 3450 1200
-4 0 0 50 -1 0 12 0.0000 4 180 585 3600 1425 wpa_cli\001
--6
-6 4725 1200 5925 1500
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4725 1200 5925 1200 5925 1500 4725 1500 4725 1200
-4 0 0 50 -1 0 12 0.0000 4 135 1005 4800 1425 GUI frontend\001
--6
-6 6000 2700 7200 3225
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6000 2700 7200 2700 7200 3225 6000 3225 6000 2700
-4 0 0 50 -1 0 12 0.0000 4 135 975 6075 2925 WPA/WPA2\001
-4 0 0 50 -1 0 12 0.0000 4 135 1065 6075 3150 state machine\001
--6
-6 6000 4950 7200 5475
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6000 4950 7200 4950 7200 5475 6000 5475 6000 4950
-4 0 0 50 -1 0 12 0.0000 4 135 360 6075 5175 EAP\001
-4 0 0 50 -1 0 12 0.0000 4 135 1065 6075 5400 state machine\001
--6
-6 8700 3000 9375 3300
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8700 3000 9375 3000 9375 3300 8700 3300 8700 3000
-4 0 0 50 -1 0 12 0.0000 4 150 480 8775 3225 crypto\001
--6
-6 4350 3900 5025 4425
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4350 3900 5025 3900 5025 4425 4350 4425 4350 3900
-4 0 0 50 -1 0 12 0.0000 4 105 420 4500 4125 event\001
-4 0 0 50 -1 0 12 0.0000 4 180 315 4500 4350 loop\001
--6
-6 4275 2550 5100 2850
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4275 2550 5100 2550 5100 2850 4275 2850 4275 2550
-4 0 0 50 -1 0 12 0.0000 4 135 450 4425 2775 ctrl i/f\001
--6
-6 6000 3900 7200 4425
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6000 3900 7200 3900 7200 4425 6000 4425 6000 3900
-4 0 0 50 -1 0 12 0.0000 4 135 600 6075 4125 EAPOL\001
-4 0 0 50 -1 0 12 0.0000 4 135 1065 6075 4350 state machine\001
--6
-6 1800 6000 7800 8100
-6 1800 6000 7800 7200
-6 1800 6900 2700 7200
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 1800 6900 2700 6900 2700 7200 1800 7200 1800 6900
-4 0 0 50 -1 0 12 0.0000 4 105 375 1875 7125 wext\001
--6
-6 4725 6900 5625 7200
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4725 6900 5625 6900 5625 7200 4725 7200 4725 6900
-4 0 0 50 -1 0 12 0.0000 4 135 555 4800 7125 hermes\001
--6
-6 6675 6900 7800 7200
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 6675 6900 7800 6900 7800 7200 6675 7200 6675 6900
-4 0 0 50 -1 0 12 0.0000 4 180 930 6750 7125 ndiswrapper\001
--6
-6 5700 6900 6600 7200
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 5700 6900 6600 6900 6600 7200 5700 7200 5700 6900
-4 0 0 50 -1 0 12 0.0000 4 135 420 5775 7125 atmel\001
--6
-6 4275 6000 5100 6300
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 4275 6000 5100 6000 5100 6300 4275 6300 4275 6000
-4 0 0 50 -1 0 12 0.0000 4 135 630 4350 6225 driver i/f\001
--6
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 2775 6900 3675 6900 3675 7200 2775 7200 2775 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 3750 6900 4650 6900 4650 7200 3750 7200 3750 6900
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 4
-	 2250 6900 2250 6600 7200 6600 7200 6900
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 3225 6900 3225 6600
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4200 6900 4200 6600
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 5175 6900 5175 6600
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6150 6900 6150 6600
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4650 6600 4650 6300
-4 0 0 50 -1 0 12 0.0000 4 180 510 2850 7125 hostap\001
-4 0 0 50 -1 0 12 0.0000 4 135 600 3825 7125 madwifi\001
--6
-6 3525 7800 5775 8100
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 3525 7800 5775 7800 5775 8100 3525 8100 3525 7800
-4 0 0 50 -1 0 12 0.0000 4 135 2145 3600 8025 kernel network device driver\001
--6
-2 1 1 1 0 7 50 -1 -1 4.000 0 0 -1 0 0 2
-	 2250 7200 4200 7800
-2 1 1 1 0 7 50 -1 -1 4.000 0 0 -1 0 0 2
-	 7200 7200 5100 7800
--6
-6 9600 3000 10275 3300
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9600 3000 10275 3000 10275 3300 9600 3300 9600 3000
-4 0 0 50 -1 0 12 0.0000 4 135 315 9750 3225 TLS\001
--6
-6 8100 4425 10425 7350
-6 8175 4725 9225 5025
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 4725 9225 4725 9225 5025 8175 5025 8175 4725
-4 0 0 50 -1 0 12 0.0000 4 135 735 8250 4950 EAP-TLS\001
--6
-6 9300 4725 10350 5025
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 4725 10350 4725 10350 5025 9300 5025 9300 4725
-4 0 0 50 -1 0 12 0.0000 4 135 810 9375 4950 EAP-MD5\001
--6
-6 8175 5100 9225 5400
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 5100 9225 5100 9225 5400 8175 5400 8175 5100
-4 0 0 50 -1 0 12 0.0000 4 135 885 8250 5325 EAP-PEAP\001
--6
-6 9300 5100 10350 5400
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 5100 10350 5100 10350 5400 9300 5400 9300 5100
-4 0 0 50 -1 0 12 0.0000 4 135 840 9375 5325 EAP-TTLS\001
--6
-6 8175 5475 9225 5775
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 5475 9225 5475 9225 5775 8175 5775 8175 5475
-4 0 0 50 -1 0 12 0.0000 4 135 780 8250 5700 EAP-GTC\001
--6
-6 9300 5475 10350 5775
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 5475 10350 5475 10350 5775 9300 5775 9300 5475
-4 0 0 50 -1 0 12 0.0000 4 135 765 9375 5700 EAP-OTP\001
--6
-6 8175 5850 9225 6150
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 5850 9225 5850 9225 6150 8175 6150 8175 5850
-4 0 0 50 -1 0 12 0.0000 4 135 750 8250 6075 EAP-SIM\001
--6
-6 9300 6225 10350 6525
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 6225 10350 6225 10350 6525 9300 6525 9300 6225
-4 0 0 50 -1 0 12 0.0000 4 135 465 9375 6450 LEAP\001
--6
-6 8175 6225 9225 6525
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 6225 9225 6225 9225 6525 8175 6525 8175 6225
-4 0 0 50 -1 0 12 0.0000 4 135 765 8250 6450 EAP-PSK\001
--6
-6 9300 5850 10350 6150
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 5850 10350 5850 10350 6150 9300 6150 9300 5850
-4 0 0 50 -1 0 12 0.0000 4 135 825 9375 6075 EAP-AKA\001
--6
-6 8175 6975 9675 7275
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 6975 9675 6975 9675 7275 8175 7275 8175 6975
-4 0 0 50 -1 0 12 0.0000 4 135 1365 8250 7200 EAP-MSCHAPv2\001
--6
-6 9300 6600 10350 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 9300 6600 10350 6600 10350 6900 9300 6900 9300 6600
-4 0 0 50 -1 0 12 0.0000 4 135 870 9375 6825 EAP-FAST\001
--6
-6 8175 6600 9225 6900
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8175 6600 9225 6600 9225 6900 8175 6900 8175 6600
-4 0 0 50 -1 0 12 0.0000 4 135 795 8250 6825 EAP-PAX\001
--6
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 8100 7350 10425 7350 10425 4425 8100 4425 8100 7350
-4 0 0 50 -1 0 12 0.0000 4 135 1050 8700 4650 EAP methods\001
--6
-6 2775 5025 4050 5325
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 2775 5025 4050 5025 4050 5325 2775 5325 2775 5025
-4 0 0 50 -1 0 12 0.0000 4 135 990 2925 5250 driver events\001
--6
-6 2775 3150 4050 3450
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 2775 3150 4050 3150 4050 3450 2775 3450 2775 3150
-4 0 0 50 -1 0 12 0.0000 4 180 990 2925 3375 configuration\001
--6
-2 1 1 1 0 7 50 -1 -1 3.000 0 0 -1 0 0 2
-	 1275 4200 1875 4200
-2 1 1 1 0 7 50 -1 -1 4.000 0 0 -1 0 0 2
-	 4500 2550 3900 1500
-2 1 1 1 0 7 50 -1 -1 4.000 0 0 -1 0 0 2
-	 4800 2550 5400 1500
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 2925 4200 4350 4200
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 5025 3900 6000 3000
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 5025 4200 6000 4200
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4650 6000 4650 4425
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6600 4425 6600 4950
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6600 3225 6600 3900
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 7200 5250 8100 5250
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 9075 4425 9075 3300
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 7200 3000 8700 3150
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4650 3900 4650 2850
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 7200 4125 8700 3300
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6000 4350 5025 6000
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 6000 3150 4875 6000
-2 2 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 5
-	 1500 2100 10800 2100 10800 7500 1500 7500 1500 2100
-2 1 0 1 2 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 9900 4425 9900 3300
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 1
-	 4350 3900
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4350 3900 4050 3450
-2 1 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 2
-	 4350 4425 4050 5025
-4 0 0 50 -1 0 12 0.0000 4 135 915 375 3975 EAPOL and\001
-4 0 0 50 -1 0 12 0.0000 4 180 630 375 4200 pre-auth\001
-4 0 0 50 -1 0 12 0.0000 4 180 810 375 4425 ethertypes\001
-4 0 0 50 -1 0 12 0.0000 4 135 1050 375 4650 from/to kernel\001
-4 0 0 50 -1 0 12 0.0000 4 135 1920 3675 1875 frontend control interface\001
-4 0 0 50 -1 2 14 0.0000 4 210 1440 1637 2371 wpa_supplicant\001