\n"; # # See API-README for more details of these variables and how # to configure miner.php # # Web page title $title = 'Mine'; # # Set $readonly to true to force miner.php to be readonly # Set $readonly to false then it will check cgminer 'privileged' $readonly = false; # # Set $userlist to null to allow anyone access or read API-README $userlist = null; # # Set $notify to false to NOT attempt to display the notify command # Set $notify to true to attempt to display the notify command $notify = true; # # Set $checklastshare to true to do the following checks: # If a device's last share is 12x expected ago then display as an error # If a device's last share is 8x expected ago then display as a warning # If either of the above is true, also display the whole line highlighted # This assumes shares are 1 difficulty shares $checklastshare = true; # # Set $poolinputs to true to show the input fields for adding a pool # and changing the pool priorities # N.B. also if $readonly is true, it will not display the fields $poolinputs = false; # # Default port to use if any $rigs entries don't specify the port number $rigport = 4028; # # Set $rigs to an array of your cgminer rigs that are running # format: 'IP' or 'Host' or 'IP:Port' or 'Host:Port' or 'Host:Port:Name' $rigs = array('127.0.0.1:4028'); # # Set $rignames to false, or one of 'ip' or 'ipx' # this says what to use if $rigs doesn't have a 'name' $rignames = false; # # Set $rigbuttons to false to display a link rather than a button $rigbuttons = true; # # Set $mcast to true to look for your rigs and ignore $rigs $mcast = false; # # Set $mcastexpect to at least how many rigs you expect it to find $mcastexpect = 0; # # API Multicast address all cgminers are listening on $mcastaddr = '224.0.0.75'; # # API Multicast UDP port all cgminers are listening on $mcastport = 4028; # # The code all cgminers expect in the Multicast message sent $mcastcode = 'FTW'; # # UDP port cgminers are to reply on (by request) $mcastlistport = 4027; # # Set $mcasttimeout to the number of seconds (floating point) # to wait for replies to the Multicast message $mcasttimeout = 1.5; # # Set $mcastretries to the number of times to retry the multicast $mcastretries = 0; # # Set $allowgen to true to allow customsummarypages to use 'gen' # false means ignore any 'gen' options $allowgen = false; # # Set $rigipsecurity to false to show the IP/Port of the rig # in the socket error messages and also show the full socket message $rigipsecurity = true; # # Set $rigtotals to true to display totals on the single rig page # 'false' means no totals (and ignores $forcerigtotals) # You can force it to always show rig totals when there is only # one line by setting $forcerigtotals = true; $rigtotals = true; $forcerigtotals = false; # # These should be OK for most cases $socksndtimeoutsec = 10; $sockrcvtimeoutsec = 40; # # List of fields NOT to be displayed # This example would hide the slightly more sensitive pool information #$hidefields = array('POOL.URL' => 1, 'POOL.User' => 1); $hidefields = array(); # # Auto-refresh of the page (in seconds) - integers only # $ignorerefresh = true/false always ignore refresh parameters # $changerefresh = true/false show buttons to change the value # $autorefresh = default value, 0 means dont auto-refresh $ignorerefresh = false; $changerefresh = true; $autorefresh = 0; # # Settings for avalon miners - adjust in myminer.php based # on the type of avalon miner you have $avatmaxmed = 100; $avatmaxhi = 110; $avatempmed = 32; $avatemphi = 40; $avaghsmmmin = 8000; # # Settings for s9 miners - adjust in myminer.php $s9tempmed = 100; $s9temphi = 110; $s9chainmin = 4000; $s9acn = 63; # # Should we allow custom pages? # (or just completely ignore them and don't display the buttons) $allowcustompages = true; # # OK this is a bit more complex item: Custom Summary Pages # As mentioned above, see API-README # see the example below (if there is no matching data, no total will show) $mobilepage = array( 'DATE' => null, 'RIGS' => null, 'SUMMARY' => array('Elapsed', 'MHS av', 'MHS 5m', 'Found Blocks=Blks', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Hardware Errors=HW', 'Work Utility=WU'), 'DEVS+NOTIFY' => array('DEVS.Name=Name', 'DEVS.ID=ID', 'DEVS.Status=Status', 'DEVS.Temperature=Temp', 'DEVS.MHS av=MHS av', 'DEVS.MHS 5m=MHS 5m', 'DEVS.Difficulty Accepted=DiffA', 'DEVS.Difficulty Rejected=DiffR', 'DEVS.Work Utility=WU', 'NOTIFY.Last Not Well=Not Well'), 'POOL' => array('POOL', 'Status', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Last Share Time=LST')); $mobilesum = array( 'SUMMARY' => array('MHS av', 'MHS 5m', 'Found Blocks', 'Difficulty Accepted', 'Difficulty Rejected', 'Hardware Errors', 'Work Utility'), 'DEVS+NOTIFY' => array('DEVS.MHS av', 'DEVS.Difficulty Accepted', 'DEVS.Difficulty Rejected'), 'POOL' => array('Difficulty Accepted', 'Difficulty Rejected')); # $statspage = array( 'DATE' => null, 'RIGS' => null, 'SUMMARY' => array('Elapsed', 'MHS av', 'MHS 5m', 'Found Blocks=Blks', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Work Utility=WU', 'Hardware Errors=HW Errs', 'Network Blocks=Net Blks'), 'COIN' => array('Current Block Time','Current Block Hash','Network Difficulty'), 'STATS' => array('*')); # $statssum = array( 'SUMMARY' => array('MHS av', 'MHS 5m', 'Found Blocks', 'Difficulty Accepted', 'Difficulty Rejected', 'Work Utility', 'Hardware Errors')); # $avalonmmflds = array('#', 'MM', 'ID', 'MMID', 'Connecter', 'Elapsed', 'Temp=Inflow', 'TMax=Outflow', 'Fan=FanRPM', 'FanR=Fan%', 'GEN.AVATHS=TH/s||GHSmm', 'Vi', 'Vo', 'Freq', 'Led', 'PG', 'ECHU', 'ECMM', 'Ver'); # $avalonpage = array( 'DATE' => null, 'COIN' => array('Current Block Time','Current Block Hash','Network Difficulty'), 'SUMMARY' => array('#', 'Elapsed', 'GEN.THS av=TH/s av||MHS av', 'GEN.THS 5m=TH/s 5m||MHS 5m', 'Found Blocks=Blks', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Work Utility=WU', 'Hardware Errors=HW Errs', 'Network Blocks=Net Blks', 'Best Share'), $ect => null, # show the EC* code table 'MM' => $avalonmmflds ); # $avalonsum = array( 'SUMMARY' => array('#', 'GEN.THS av', 'MHS av', 'GEN.THS 5m', 'MHS 5m', 'Found Blocks', 'Difficulty Accepted', 'Difficulty Rejected', 'Work Utility', 'Hardware Errors'), 'MM' => array('#', 'GEN.AVATHS', 'GHSmm')); # $avalonext = array( 'COIN' => array( 'group' => array('Current Block Hash', 'Network Difficulty'), 'calc' => array('Current Block Time' => 'min')), 'SUMMARY' => array( 'gen' => array('THS av' => 'MHS av / 1000000.0', 'THS 5m' => 'MHS 5m / 1000000.0')), 'MM' => array( 'gen' => array('AVATHS' => 'GHSmm / 1000.0')) ); # $avalonspage = array( 'DATE' => null, 'COIN' => array('Current Block Time','Current Block Hash','Network Difficulty'), $ect => null, # show the EC* code table 'MM0' => $avalonmmflds, # hi temp and low hash 'MM1' => $avalonmmflds, # hi temp only 'MM2' => $avalonmmflds, # low hash only 'MM3' => $avalonmmflds # the rest ); # $avalonsmmsum = array('#', 'GEN.AVATHS', 'GHSmm'); $avalonssum = array( 'MM0' => $avalonsmmsum, 'MM1' => $avalonsmmsum, 'MM2' => $avalonsmmsum, 'MM3' => $avalonsmmsum ); # $s9page = array( 'DATE' => null, 'STATS' => array('#', 'Elapsed', 'fan_num', 'GEN.FanA=FanA||fan3', 'GEN.FanB=FanB||fan6', 'GEN.TempA=TempA||temp2_6', 'GEN.TempB=TempB||temp2_7', 'GEN.TempC=TempC||temp2_8', 'GEN.S9THS=TH/s||total_rate', 'GEN.AcnA=ChainA||chain_acn6', 'GEN.AcnB=ChainB||chain_acn7', 'GEN.AcnC=ChainC||chain_acn8', 'GEN.RateA=RateA||chain_rate6', 'GEN.RateB=RateB||chain_rate7', 'GEN.RateC=RateC||chain_rate8') ); # $s9sum = array( 'STATS' => array('#', 'GEN.S9THS', 'total_rate') ); # function s9fmtsub($match, $num, $ch, $alldata, $warnclass, $errorclass) { global $s9tempmed, $s9temphi, $s9chainmin, $s9acn; $lab = ''; $ret = ''; $class = ''; $len = strlen($match); foreach ($alldata as $fld => $val) { $rep = preg_replace('/\d*$/', '', $fld); if ($rep == $match) { if ($val != '' && $val != '0') { if ($num-- > 0) continue; $lab = $ch.substr($fld, $len).': '; $ret = $val; break; } } } if ($ret == '') { $lab = ''; $ret = 'none/0'; $class = $errorclass; } else { switch($match) { case 'temp2_': if ($ret == 0 || $ret >= $s9temphi) $class = $errorclass; else { if ($ret >= $s9tempmed) $class = $warnclass; } $ret .= '°C'; break; case 'chain_acn': if ($ret != $s9acn) $class = $warnclass; break; case 'chain_rate': if ($ret == 0) $class = $errorclass; else { if ($ret < $s9chainmin) $class = $warnclass; } $ret = number_format((float)$ret, 2); break; } } return array($lab.$ret, $class); } # function s9fmt($section, $name, $value, $when, $alldata, $warnclass, $errorclass, $hiclass, $loclass, $totclass) { $ret = ''; $class = ''; if ($section == 'total' && $name != 'S9THS') return array($ret, $class); switch($name) { case 'FanA': return s9fmtsub('fan', 0, 'f', $alldata, $warnclass, $errorclass); case 'FanB': return s9fmtsub('fan', 1, 'f', $alldata, $warnclass, $errorclass); case 'TempA': return s9fmtsub('temp2_', 0, 't', $alldata, $warnclass, $errorclass); case 'TempB': return s9fmtsub('temp2_', 1, 't', $alldata, $warnclass, $errorclass); case 'TempC': return s9fmtsub('temp2_', 2, 't', $alldata, $warnclass, $errorclass); case 'AcnA': return s9fmtsub('chain_acn', 0, 'a', $alldata, $warnclass, $errorclass); case 'AcnB': return s9fmtsub('chain_acn', 1, 'a', $alldata, $warnclass, $errorclass); case 'AcnC': return s9fmtsub('chain_acn', 2, 'a', $alldata, $warnclass, $errorclass); case 'RateA': return s9fmtsub('chain_rate', 0, 'r', $alldata, $warnclass, $errorclass); case 'RateB': return s9fmtsub('chain_rate', 1, 'r', $alldata, $warnclass, $errorclass); case 'RateC': return s9fmtsub('chain_rate', 2, 'r', $alldata, $warnclass, $errorclass); case 'S9THS': if ($value == 0) { $class = $errorclass; $ret = 0; } else $ret = number_format(floatval($value)/1000.0, 2); break; } return array($ret, $class); } # use the first non-zero value - allow 1, 2 or 3 parameters function s9ghs($ghs1 = 0, $ghs2 = 0, $ghs3 = 0) { if ($ghs1 != 0) return($ghs1); if ($ghs2 != 0) return($ghs2); if ($ghs3 != 0) return($ghs3); return 0; } # set them to a fixed value then use the above custom fmt to find the values $s9ext = array( 'STATS' => array( 'where' => array(array('ID', '!sub', 'POOL')), 'gen' => array('FanA' => '1', 'FanB' => '2', 'TempA' => '3', 'TempB' => '4', 'TempC' => '5', 'S9THS' => 's9ghs("GHS av","GHS 5s","total_rate")', 'AcnA' => '7', 'AcnB' => '8', 'AcnC' => '9', 'RateA' => '10', 'RateB' => '11', 'RateC' => '12'), 'fmt' => 's9fmt') ); # $poolspage = array( 'DATE' => null, 'RIGS' => null, 'SUMMARY' => array('Elapsed', 'MHS av', 'MHS 5m', 'Found Blocks=Blks', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Work Utility', 'Hardware Errors=HW', 'Network Blocks=Net Blks', 'Best Share'), 'POOL+STATS' => array('STATS.ID=ID', 'POOL.URL=URL', 'POOL.Difficulty Accepted=DiffA', 'POOL.Difficulty Rejected=DiffR', 'POOL.Has Stratum=Stratum', 'POOL.Stratum Active=StrAct', 'POOL.Has GBT=GBT', 'STATS.Times Sent=TSent', 'STATS.Bytes Sent=BSent', 'STATS.Net Bytes Sent=NSent', 'STATS.Times Recv=TRecv', 'STATS.Bytes Recv=BRecv', 'STATS.Net Bytes Recv=NRecv', 'GEN.AvShr=AvShr')); # $poolssum = array( 'SUMMARY' => array('MHS av', 'MHS 5m', 'Found Blocks', 'Difficulty Accepted', 'Difficulty Rejected', 'Work Utility', 'Hardware Errors'), 'POOL+STATS' => array('POOL.Difficulty Accepted', 'POOL.Difficulty Rejected', 'STATS.Times Sent', 'STATS.Bytes Sent', 'STATS.Net Bytes Sent', 'STATS.Times Recv', 'STATS.Bytes Recv', 'STATS.Net Bytes Recv')); # $poolsext = array( 'POOL+STATS' => array( 'where' => null, 'group' => array('POOL.URL', 'POOL.Has Stratum', 'POOL.Stratum Active', 'POOL.Has GBT'), 'calc' => array('POOL.Difficulty Accepted' => 'sum', 'POOL.Difficulty Rejected' => 'sum', 'STATS.Times Sent' => 'sum', 'STATS.Bytes Sent' => 'sum', 'STATS.Net Bytes Sent' => 'sum', 'STATS.Times Recv' => 'sum', 'STATS.Bytes Recv' => 'sum', 'STATS.Net Bytes Recv' => 'sum', 'POOL.Accepted' => 'sum'), 'gen' => array('AvShr' => 'round(POOL.Difficulty Accepted/'. 'max(POOL.Accepted,1)*100)/100'), 'having' => array(array('STATS.Bytes Recv', '>', 0))) ); # $devnotpage = array( 'DATE' => null, 'RIGS' => null, 'DEVS+NOTIFY' => array('DEVS.Name=Name', 'DEVS.ID=ID', 'DEVS.Temperature=Temp', 'DEVS.MHS av=MHS av', 'DEVS.Difficulty Accepted=DiffA', 'DEVS.Difficulty Rejected=DiffR', 'NOTIFY.Last Not Well=Last Not Well')); $devnotsum = array( 'DEVS+NOTIFY' => array('DEVS.MHS av', 'DEVS.Difficulty Accepted', 'DEVS.Difficulty Rejected')); # $devdetpage = array( 'DATE' => null, 'RIGS' => null, 'DEVS+DEVDETAILS' => array('DEVS.Name=Name', 'DEVS.ID=ID', 'DEVS.Temperature=Temp', 'DEVS.MHS av=MHS av', 'DEVS.Difficulty Accepted=DiffA', 'DEVS.Difficulty Rejected=DiffR', 'DEVDETAILS.Device Path=Device')); $devdetsum = array( 'DEVS+DEVDETAILS' => array('DEVS.MHS av', 'DEVS.Difficulty Accepted', 'DEVS.Difficulty Rejected')); # $protopage = array( 'DATE' => null, 'RIGS' => null, 'CONFIG' => array('ASC Count=ASCs', 'PGA Count=PGAs', 'Pool Count=Pools', 'Strategy', 'Device Code', 'OS', 'Failover-Only'), 'SUMMARY' => array('Elapsed', 'MHS av', 'Found Blocks=Blks', 'Difficulty Accepted=Diff Acc', 'Difficulty Rejected=Diff Rej', 'Hardware Errors=HW Errs', 'Network Blocks=Net Blks', 'Utility', 'Work Utility'), 'POOL+STATS' => array('STATS.ID=ID', 'POOL.URL=URL', 'POOL.Accepted=Acc', 'POOL.Difficulty Accepted=DiffA', 'POOL.Difficulty Rejected=DiffR', 'POOL.Has GBT=GBT', 'STATS.Max Diff=Max Work Diff', 'STATS.Times Sent=#Sent', 'STATS.Bytes Sent=Byte Sent', 'STATS.Net Bytes Sent=Net Sent', 'STATS.Times Recv=#Recv', 'STATS.Bytes Recv=Byte Recv', 'STATS.Net Bytes Recv=Net Recv')); $protosum = array( 'SUMMARY' => array('MHS av', 'Found Blocks', 'Difficulty Accepted', 'Difficulty Rejected', 'Hardware Errors', 'Utility', 'Work Utility'), 'POOL+STATS' => array('POOL.Accepted', 'POOL.Difficulty Accepted', 'POOL.Difficulty Rejected', 'STATS.Times Sent', 'STATS.Bytes Sent', 'STATS.Net Bytes Sent', 'STATS.Times Recv', 'STATS.Bytes Recv', 'STATS.Net Bytes Recv')); $protoext = array( 'POOL+STATS' => array( 'where' => null, 'group' => array('POOL.URL', 'POOL.Has GBT'), 'calc' => array('POOL.Accepted' => 'sum', 'POOL.Difficulty Accepted' => 'sum', 'POOL.Difficulty Rejected' => 'sum', 'STATS.Max Diff' => 'max', 'STATS.Times Sent' => 'sum', 'STATS.Bytes Sent' => 'sum', 'STATS.Net Bytes Sent' => 'sum', 'STATS.Times Recv' => 'sum', 'STATS.Bytes Recv' => 'sum', 'STATS.Net Bytes Recv' => 'sum'), 'having' => array(array('STATS.Bytes Recv', '>', 0))) ); # # If 'gen' isn't enabled, the 'GEN' fields won't show but # where present, will be replaced with the ||SUMMARY fields $kanogenpage = array( 'DATE' => null, 'RIGS' => null, 'SUMMARY+COIN' => array('SUMMARY.Elapsed=Elapsed', 'GEN.Mined=Block%', 'GEN.THS Acc=TH/s Acc', 'GEN.THS av=TH/s av||SUMMARY.MHS av=MHS av', 'GEN.THS 5m=TH/s 5m||SUMMARY.MHS 5m=MHS 5m', 'GEN.THS WU=TH/s WU||SUMMARY.Work Utility=WU', 'SUMMARY.Found Blocks=Blks', 'SUMMARY.Difficulty Accepted=DiffA', 'SUMMARY.Difficulty Rejected=DiffR', 'SUMMARY.Hardware Errors=HW', 'SUMMARY.Difficulty Stale=DiffS', 'SUMMARY.Best Share=Best Share', 'SUMMARY.Device Hardware%=Dev HW%', 'SUMMARY.Device Rejected%=Dev Rej%', 'SUMMARY.Pool Rejected%=Pool Rej%', 'SUMMARY.Pool Stale%=Pool Stale%'), 'POOL' => array('URL', 'Diff1 Shares=Diff Work', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Difficulty Stale=DiffS', 'Best Share', 'GEN.Acc=Pool Acc%', 'GEN.Rej=Pool Rej%'), 'COIN' => array('Current Block Time','Current Block Hash','Network Difficulty') ); # sum should list all fields seperately including GEN/BGEN || replacements $kanogensum = array( 'SUMMARY+COIN' => array('GEN.Mined', 'GEN.THS Acc', 'GEN.THS av', 'GEN.THS 5m', 'GEN.THS WU', 'SUMMARY.MHS av', 'SUMMARY.MHS 5m', 'SUMMARY.Work Utility', 'SUMMARY.Found Blocks', 'SUMMARY.Difficulty Accepted', 'SUMMARY.Difficulty Rejected', 'SUMMARY.Hardware Errors', 'SUMMARY.Difficulty Stale'), 'POOL' => array('Diff1 Shares', 'Difficulty Accepted', 'Difficulty Rejected', 'Difficulty Stale') ); # 'where', 'calc' and 'having' should list GEN/BGEN || replacements seperately # 'group' must use the 'name1||name2' format for GEN/BGEN fields $kanogenext = array( 'SUMMARY+COIN' => array( 'gen' => array('THS Acc' => 'round(pow(2,32) * SUMMARY.Difficulty Accepted / '. 'SUMMARY.Elapsed / 10000000) / 100000', 'Mined' => 'SUMMARY.Elapsed * SUMMARY.Work Utility / 60 / '. 'COIN.Network Difficulty', 'THS av' => 'SUMMARY.MHS av / 1000000.0', 'THS 5m' => 'SUMMARY.MHS 5m / 1000000.0', 'THS WU' => 'round(pow(2,32) * SUMMARY.Work Utility / 60 / '. '10000000 ) / 100000')), 'POOL' => array( 'group' => array('URL'), 'calc' => array('Diff1 Shares' => 'sum', 'Difficulty Accepted' => 'sum', 'Difficulty Rejected' => 'sum', 'Difficulty Stale' => 'sum', 'Best Share' => 'max'), 'gen' => array('Rej' => 'Difficulty Rejected / '. 'max(1,Difficulty Accepted+Difficulty Rejected)', 'Acc' => 'Difficulty Accepted / '. 'max(1,Difficulty Accepted+Difficulty Rejected)')) ); # $syspage = array( 'DATE' => null, 'RIGS' => null, 'SUMMARY' => array('#', 'Elapsed', 'MHS av', 'MHS 5m', 'Found Blocks=Blks', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Difficulty Stale=DiffS', 'Hardware Errors=HW', 'Work Utility', 'Network Blocks=Net Blks', 'Total MH', 'Best Share', 'Device Hardware%=Dev HW%', 'Device Rejected%=Dev Rej%', 'Pool Rejected%=Pool Rej%', 'Pool Stale%', 'Last getwork'), 'DEVS' => array('#', 'ID', 'Name', 'ASC', 'Device Elapsed', 'Enabled', 'Status', 'No Device', 'Temperature=Temp', 'MHS av', 'MHS 5s', 'MHS 5m', 'Diff1 Work', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Hardware Errors=HW', 'Work Utility', 'Last Valid Work', 'Last Share Pool', 'Last Share Time', 'Total MH', 'Device Hardware%=Dev HW%', 'Device Rejected%=Dev Rej%'), 'POOL' => array('POOL', 'URL', 'Status', 'Priority', 'Quota', 'Getworks', 'Diff1 Shares', 'Difficulty Accepted=DiffA', 'Difficulty Rejected=DiffR', 'Difficulty Stale=DiffS', 'Last Share Difficulty', 'Last Share Time', 'Best Share', 'Pool Rejected%=Pool Rej%', 'Pool Stale%') ); $syssum = array( 'SUMMARY' => array('MHS av', 'MHS 5m', 'Found Blocks', 'Difficulty Accepted', 'Difficulty Rejected', 'Difficulty Stale', 'Hardware Errors', 'Work Utility', 'Total MH'), 'DEVS' => array('MHS av', 'MHS 5s', 'MHS 5m', 'Diff1 Work', 'Difficulty Accepted', 'Difficulty Rejected', 'Hardware Errors', 'Total MH'), 'POOL' => array('Getworks', 'Diff1 Shares', 'Difficulty Accepted', 'Difficulty Rejected', 'Difficulty Stale') ); # # $customsummarypages is an array of these Custom Summary Pages # that you can override in myminer.php # It can be 'Name' => 1 with 'Name' in any of $user_pages or $sys_pages # and it can be a fully defined 'Name' => array(...) like in $sys_pages below $customsummarypages = array( 'Kano' => 1, 'Mobile' => 1, 'Stats' => 1, 'Avalon' => 1, 'S9' => 1, 'Avalons' => 1, 'Pools' => 1 ); # # $user_pages are the myminer.php definable version of $sys_pages # It should contain a set of 'Name' => array(...) like in $sys_pages # that $customsummarypages can refer to by 'Name' # If a 'Name' is in both $user_pages and $sys_pages, then the one # in $user_pages will override the one in $sys_pages $user_pages = array(); # $here = $_SERVER['PHP_SELF']; # global $tablebegin, $tableend, $warnfont, $warnoff, $dfmt; # $tablebegin = ''; $tableend = '
'; $warnfont = ''; $warnoff = ''; $dfmt = 'H:i:s j-M-Y \U\T\CP'; # $miner_font_family = 'Verdana, Arial, sans-serif, sans'; $miner_font_size = '13pt'; # $bad_font_family = '"Times New Roman", Times, serif'; $bad_font_size = '18pt'; # # List of css names to add to the css style object # e.g. array('td.cool' => false); # true/false to not include the default $miner_font # The css name/value pairs must be defined in $colouroverride below $add_css_names = array(); # # Edit this or redefine it in myminer.php to change the colour scheme # See $colourtable below for the list of names $colouroverride = array(); # # Where to place the buttons: 'top' 'bot' 'both' # anything else means don't show them - case sensitive $placebuttons = 'top'; # # If 'estats' doesn't work or isn't enabled, replace this with 'stats' $mmcmd = 'estats'; # # This below allows you to put your own settings into a seperate file # so you don't need to update miner.php with your preferred settings # every time a new version is released # Just create the file 'myminer.php' in the same directory as # 'miner.php' - and put your own settings in there if (file_exists('myminer.php')) include_once('myminer.php'); # # define $avalonsext after myminer.php to allow override of $ava... limits $avalonsmmggen = array('AVATHS' => 'GHSmm / 1000.0'); $avalonsext = array( 'COIN' => array( 'group' => array('Current Block Hash', 'Network Difficulty'), 'calc' => array('Current Block Time' => 'min')), 'MM0' => array( 'where' => array(array('TMax', '>=', $avatmaxmed), array('GHSmm', '<', $avaghsmmmin)), 'gen' => $avalonsmmggen), 'MM1' => array( 'where' => array(array('TMax', '>=', $avatmaxmed), array('GHSmm', '>=', $avaghsmmmin)), 'gen' => $avalonsmmggen), 'MM3' => array( 'where' => array(array('TMax', '<', $avatmaxmed), array('GHSmm', '<', $avaghsmmmin)), 'gen' => $avalonsmmggen), 'MM2' => array( 'where' => array(array('TMax', '<', $avatmaxmed), array('GHSmm', '>=', $avaghsmmmin)), 'gen' => $avalonsmmggen) ); # # This is the system default that must always contain all necessary # colours so it must be a constant # You can override these values with $colouroverride # The only one missing is $warnfont # - which you can override directly anyway global $colourtable; $colourtable = array( 'body bgcolor' => '#ecffff', 'td color' => 'blue', 'td.two color' => 'blue', 'td.two background' => '#ecffff', 'td.h color' => 'blue', 'td.h background' => '#c4ffff', 'td.err color' => 'black', 'td.err background' => '#ff3050', 'td.bad color' => 'black', 'td.bad background' => '#ff3050', 'td.warn color' => 'black', 'td.warn background' => '#ffb050', 'td.sta color' => 'green', 'td.tot color' => 'blue', 'td.tot background' => '#fff8f2', 'td.lst color' => 'blue', 'td.lst background' => '#ffffdd', 'td.hi color' => 'blue', 'td.hi background' => '#f6ffff', 'td.lo color' => 'blue', 'td.lo background' => '#deffff' ); # # A list of system default summary pages (defined further above) # that you can use by 'Name' in $customsummarypages global $sys_pages; $sys_pages = array( 'Mobile' => array($mobilepage, $mobilesum), 'Stats' => array($statspage, $statssum), 'Avalon' => array($avalonpage, $avalonsum, $avalonext), 'Avalons' => array($avalonspage, $avalonssum, $avalonsext), 'S9' => array($s9page, $s9sum, $s9ext), 'Pools' => array($poolspage, $poolssum, $poolsext), 'DevNot' => array($devnotpage, $devnotsum), 'DevDet' => array($devdetpage, $devdetsum), 'Proto' => array($protopage, $protosum, $protoext), 'Kano' => array($kanogenpage, $kanogensum, $kanogenext), 'Summary' => array($syspage, $syssum) ); # # Don't touch these $miner = null; $port = null; # global $rigips; $rigips = array(); # # Ensure it is only ever shown once global $showndate; $showndate = false; # global $rownum; $rownum = 0; # // Login global $ses; $ses = 'rutroh'; # function getcsp($name, $systempage = false) { global $customsummarypages, $user_pages, $sys_pages; if ($systempage === false) { if (!isset($customsummarypages[$name])) return false; $csp = $customsummarypages[$name]; if (is_array($csp)) { if (count($csp) < 2 || count($csp) > 3) return false; else return $csp; } } if (isset($user_pages[$name])) { $csp = $user_pages[$name]; if (!is_array($csp) || count($csp) < 2 || count($csp) > 3) return false; else return $csp; } if (isset($sys_pages[$name])) { $csp = $sys_pages[$name]; if (!is_array($csp) || count($csp) < 2 || count($csp) > 3) return false; else return $csp; } return false; } # function degenfields(&$sec, $name, $fields) { global $allowgen; if (!is_array($fields)) return; foreach ($fields as $num => $fld) if (substr($fld, 0, 5) == 'BGEN.' || substr($fld, 0, 4) == 'GEN.') { $opts = explode('||', $fld, 2); if ($allowgen) { if (count($opts) > 1) $sec[$name][$num] = $opts[0]; } else { if (count($opts) > 1) $sec[$name][$num] = $opts[1]; else unset($sec[$name][$num]); } } } # # Allow BGEN/GEN fields to have a '||' replacement when gen is disabled # N.B. if gen is disabled and all page fields are GBEN/GEN without '||' then # the table will disappear # Replacements can be in the page fields and then also the ext group fields # All other $csp sections should list both separately function degen(&$csp) { $page = 0; if (isset($csp[$page]) && is_array($csp[$page])) foreach ($csp[$page] as $sec => $fields) degenfields($csp[$page], $sec, $fields); $ext = 2; if (isset($csp[$ext]) && is_array($csp[$ext])) foreach ($csp[$ext] as $sec => $types) if (is_array($types) && isset($types['group'])) degenfields($types, 'group', $types['group']); } # function getcss($cssname, $dom = false) { global $colourtable, $colouroverride; $css = ''; foreach ($colourtable as $cssdata => $value) { $cssobj = explode(' ', $cssdata, 2); if ($cssobj[0] == $cssname) { if (isset($colouroverride[$cssdata])) $value = $colouroverride[$cssdata]; if ($dom == true) $css .= ' '.$cssobj[1].'='.$value; else $css .= $cssobj[1].':'.$value.'; '; } } return $css; } # function getdom($domname) { return getcss($domname, true); } # # N.B. don't call this before calling htmlhead() function php_pr($cmd) { global $here, $autorefresh; return "$here?ref=$autorefresh$cmd"; } # function htmlhead($mcerr, $checkapi, $rig, $pg = null, $noscript = false) { global $doctype, $title, $miner_font_family, $miner_font_size; global $bad_font_family, $bad_font_size, $add_css_names; global $error, $readonly, $poolinputs, $here; global $ignorerefresh, $autorefresh; $extraparams = ''; if ($rig != null && $rig != '') $extraparams = "&rig=$rig"; else if ($pg != null && $pg != '') $extraparams = "&pg=$pg"; if ($ignorerefresh == true || $autorefresh == 0) $refreshmeta = ''; else { $url = "$here?ref=$autorefresh$extraparams"; $refreshmeta = "\n"; } if ($readonly === false && $checkapi === true) { $error = null; $access = api($rig, 'privileged'); if ($error != null || !isset($access['STATUS']['STATUS']) || $access['STATUS']['STATUS'] != 'S') $readonly = true; } $miner_font = "font-family:$miner_font_family; font-size:$miner_font_size;"; $bad_font = "font-family:$bad_font_family; font-size:$bad_font_size;"; echo "$doctype$refreshmeta $title \n"; if ($noscript === false) { echo "\n"; } ?>
0); do { $mcast_soc = socket_create(AF_INET, SOCK_DGRAM, SOL_UDP); if ($mcast_soc === false || $mcast_soc == null) { $msg = "ERR: mcast send socket create(UDP) failed"; if ($rigipsecurity === false) { $error = socket_strerror(socket_last_error()); $error = "$msg '$error'\n"; } else $error = "$msg\n"; socket_close($rep_soc); return; } $buf = "cgminer-$mcastcode-$mcastlistport"; socket_sendto($mcast_soc, $buf, strlen($buf), 0, $mcastaddr, $mcastport); socket_close($mcast_soc); $stt = microtime(true); while (true) { $got = @socket_recvfrom($rep_soc, $buf, 32, MSG_DONTWAIT, $ip, $p); if ($got !== false && $got > 0) { $ans = explode('-', $buf, 4); if (count($ans) >= 3 && $ans[0] == 'cgm' && $ans[1] == 'FTW') { $rp = intval($ans[2]); if (count($ans) > 3) $mdes = str_replace("\0", '', $ans[3]); else $mdes = ''; if (strlen($mdes) > 0) $rig = "$ip:$rp:$mdes"; else $rig = "$ip:$rp"; if (!in_array($rig, $rigs)) $rigs[] = $rig; } } if ((microtime(true) - $stt) >= $mcasttimeout) break; usleep(100000); } if ($mcastexpect > 0 && count($rigs) >= $mcastexpect) $doretry = false; } while ($doretry && --$retries > 0); socket_close($rep_soc); } # function getrigs() { global $rigs; mcastrigs(); sort($rigs); } # function getsock($rig, $addr, $port) { global $rigport, $rigips, $rignames, $rigipsecurity; global $haderror, $error, $socksndtimeoutsec, $sockrcvtimeoutsec; $port = trim($port); if (strlen($port) == 0) $port = $rigport; $error = null; $socket = null; $socket = socket_create(AF_INET, SOCK_STREAM, SOL_TCP); if ($socket === false || $socket === null) { $haderror = true; if ($rigipsecurity === false) { $error = socket_strerror(socket_last_error()); $msg = "socket create(TCP) failed"; $error = "ERR: $msg '$error'\n"; } else $error = "ERR: socket create(TCP) failed\n"; return null; } // Ignore if this fails since the socket connect may work anyway // and nothing is gained by aborting if the option cannot be set // since we don't know in advance if it can connect socket_set_option($socket, SOL_SOCKET, SO_SNDTIMEO, array('sec' => $socksndtimeoutsec, 'usec' => 0)); socket_set_option($socket, SOL_SOCKET, SO_RCVTIMEO, array('sec' => $sockrcvtimeoutsec, 'usec' => 0)); $res = socket_connect($socket, $addr, $port); if ($res === false) { $haderror = true; if ($rigipsecurity === false) { $error = socket_strerror(socket_last_error()); $msg = "socket connect($addr,$port) failed"; $error = "ERR: $msg '$error'\n"; } else $error = "ERR: socket connect($rig) failed\n"; socket_close($socket); return null; } if ($rignames !== false && !isset($rigips[$addr])) if (socket_getpeername($socket, $ip) == true) $rigips[$addr] = $ip; return $socket; } # function readsockline($socket) { $line = ''; while (true) { $byte = socket_read($socket, 1); if ($byte === false || $byte === '') break; if ($byte === "\0") break; $line .= $byte; } return $line; } # function api_convert_escape($str) { $res = ''; $len = strlen($str); for ($i = 0; $i < $len; $i++) { $ch = substr($str, $i, 1); if ($ch != '\\' || $i == ($len-1)) $res .= $ch; else { $i++; $ch = substr($str, $i, 1); switch ($ch) { case '|': $res .= "\1"; break; case '\\': $res .= "\2"; break; case '=': $res .= "\3"; break; case ',': $res .= "\4"; break; default: $res .= $ch; } } } return $res; } # function revert($str) { return str_replace(array("\1", "\2", "\3", "\4"), array("|", "\\", "=", ","), $str); } # function api($rig, $cmd) { global $haderror, $error; global $miner, $port, $hidefields, $mmcmd; $socket = getsock($rig, $miner, $port); if ($socket != null) { if ($cmd == 'mm') socket_write($socket, $mmcmd, strlen($mmcmd)); else socket_write($socket, $cmd, strlen($cmd)); $line = readsockline($socket); socket_close($socket); if (strlen($line) == 0) { $haderror = true; $error = "WARN: '$cmd' returned nothing\n"; return $line; } # print "$cmd returned '$line'\n"; $line = api_convert_escape($line); $data = array(); $objs = explode('|', $line); foreach ($objs as $obj) { if (strlen($obj) > 0) { $items = explode(',', $obj); $item = $items[0]; $id = explode('=', $items[0], 2); if (count($id) == 1 or !ctype_digit($id[1])) $name = $id[0]; else $name = $id[0].$id[1]; if (strlen($name) == 0) $name = 'null'; $sectionname = preg_replace('/\d/', '', $name); if (isset($data[$name])) { $num = 1; while (isset($data[$name.$num])) $num++; $name .= $num; } $counter = 0; foreach ($items as $item) { $id = explode('=', $item, 2); if (isset($hidefields[$sectionname.'.'.$id[0]])) continue; if (count($id) == 2) $data[$name][$id[0]] = revert($id[1]); else $data[$name][$counter] = $id[0]; $counter++; } } } if ($cmd == 'mm') { $data2 = array(); $num = 0; foreach ($data as $name => $values) { if (substr($name, 0, 5) !== 'STATS') $data2[$name] = $values; else { if (substr($values['ID'], 0, 4) == 'POOL') continue; $snum = substr($name, 5); # if (isset($values['Connector'])) $auc = $values['Connector']; else $auc = 'AUC'; $auc .= $snum; # foreach ($values as $nam => $val) { if (substr($nam, 0, 5) !== 'MM ID') continue; $mm = 'MM'.$num; # $data2[$mm] = array('MM' => $num, 'ID' => $values['ID'], 'MMID' => substr($nam,5), 'Connecter' => $auc); # $len = strlen($val); $pos = 0; while ($pos < $len) { while ($val[$pos] == ' ') $pos++; $brl = strpos($val, '[', $pos+1); if ($brl === false) break; $brr = strpos($val, ']', $brl+1); if ($brr === false) break; # $subn = substr($val, $pos, $brl - $pos); $data2[$mm][$subn] = substr($val, $brl+1, $brr-$brl-1); # $pos = $brr+1; } # $num++; } } } return $data2; } return $data; } return null; } # function getparam($name, $both = false) { $a = null; if (isset($_POST[$name])) $a = $_POST[$name]; if (($both === true) and ($a === null)) { if (isset($_GET[$name])) $a = $_GET[$name]; } if ($a == '' || $a == null) return null; // limit to 1K just to be safe return substr($a, 0, 1024); } # function newtable() { global $tablebegin, $rownum; echo $tablebegin; $rownum = 0; } # function newrow() { echo ''; } # function othrow($row) { return "$row"; } # function otherrow($row) { echo othrow($row); } # function endrow() { global $rownum; echo ''; $rownum++; } # function endtable() { global $tableend; echo $tableend; } # function classlastshare($when, $alldata, $warnclass, $errorclass) { global $checklastshare; if ($checklastshare === false) return ''; if ($when == 0) return ''; if (!isset($alldata['MHS av'])) return ''; if ($alldata['MHS av'] == 0) return ''; if (!isset($alldata['Last Share Time'])) return ''; if (!isset($alldata['Last Share Difficulty'])) return ''; $expected = pow(2, 32) / ($alldata['MHS av'] * pow(10, 6)); // If the share difficulty changes while waiting on a share, // this calculation will of course be incorrect $expected *= $alldata['Last Share Difficulty']; $howlong = $when - $alldata['Last Share Time']; if ($howlong < 1) $howlong = 1; if ($howlong > ($expected * 12)) return $errorclass; if ($howlong > ($expected * 8)) return $warnclass; return ''; } # function endzero($num) { $rep = preg_replace('/0*$/', '', $num); if ($rep === '') $rep = '0'; return $rep; } # function fmt($section, $name, $value, $when, $alldata, $cf = NULL) { global $dfmt, $rownum; global $avatmaxmed, $avatmaxhi, $avatempmed, $avatemphi, $avaghsmmmin; global $s9tempmed, $s9temphi, $s9chainmin, $s9acn; if ($alldata == null) $alldata = array(); $errorclass = 'err'; $warnclass = 'warn'; $lstclass = 'lst'; $hiclass = 'hi'; $loclass = 'lo'; $c2class = 'two'; $totclass = 'tot'; $b = ' '; $class = ''; $nams = explode('.', $name); if (count($nams) > 1) $name = $nams[count($nams)-1]; $done = false; if ($value === null) { $ret = $b; $done = true; } else if ($cf != NULL and function_exists($cf)) { list($ret, $class) = $cf($section, $name, $value, $when, $alldata, $warnclass, $errorclass, $hiclass, $loclass, $totclass); if ($ret !== '') $done = true; } if ($done === false) { $ret = $value; /* * To speed up the PHP, the case statement is just $name * It used to be $section.'.'.$name * If any names clash, the case code will need to check the value of * $section to resolve the clash - as with 'Last Share Time' below * If the code picks up a field that you wish to format differently, * then you'll need a customsummarypage 'fmt' extension * This also removes trailing numbers so multiple fields like in the * S9 don't require many case lines */ switch (preg_replace('/\d*$/', '', $name)) { case '0': break; case 'Last Share Time': if ($section == 'total') break; if ($section == 'POOL') { if ($value == 0) $ret = 'Never'; else $ret = date('H:i:s d-M', $value); } else { if ($value == 0 || (isset($alldata['Last Share Pool']) && $alldata['Last Share Pool'] == -1)) { $ret = 'Never'; $class = $warnclass; } else { $ret = date('H:i:s', $value); $class = classlastshare($when, $alldata, $warnclass, $errorclass); } } break; case 'Last getwork': case 'Last Valid Work': if ($section == 'total') break; if ($value == 0) $ret = 'Never'; else $ret = ($value - $when) . 's'; break; case 'Last Share Pool': if ($section == 'total') break; if ($value == -1) { $ret = 'None'; $class = $warnclass; } break; case 'Elapsed': case 'Device Elapsed': if ($section == 'total') break; $s = $value % 60; $value -= $s; $value /= 60; if ($value == 0) $ret = $s.'s'; else { $m = $value % 60; $value -= $m; $value /= 60; if ($value == 0) $ret = sprintf("%dm$b%02ds", $m, $s); else { $h = $value % 24; $value -= $h; $value /= 24; if ($value == 0) $ret = sprintf("%dh$b%02dm$b%02ds", $h, $m, $s); else { if ($value == 1) $days = ''; else $days = 's'; $ret = sprintf("%dday$days$b%02dh$b%02dm$b%02ds", $value, $h, $m, $s); } } } break; case 'Last Well': if ($section == 'total') break; if ($value == '0') { $ret = 'Never'; $class = $warnclass; } else $ret = date('H:i:s', $value); break; case 'Last Not Well': if ($section == 'total') break; if ($value == '0') $ret = 'Never'; else { $ret = date('H:i:s', $value); $class = $errorclass; } break; case 'Reason Not Well': if ($section == 'total') break; if ($value != 'None') $class = $errorclass; break; case 'Utility': $ret = number_format($value, 2).'/m'; if ($value == 0) $class = $errorclass; else if (isset($alldata['Difficulty Accepted']) && isset($alldata['Accepted']) && isset($alldata['MHS av']) && ($alldata['Difficulty Accepted'] > 0) && ($alldata['Accepted'] > 0)) { $expected = 60 * $alldata['MHS av'] * (pow(10, 6) / pow(2, 32)); if ($expected == 0) $expected = 0.000001; // 1 H/s $da = $alldata['Difficulty Accepted']; $a = $alldata['Accepted']; $expected /= ($da / $a); $ratio = $value / $expected; if ($ratio < 0.9) $class = $loclass; else if ($ratio > 1.1) $class = $hiclass; } break; case 'Work Utility': $ret = number_format($value, 2).'/m'; break; case 'Temperature': if ($section == 'total') break; $ret = $value.'°C'; if (!isset($alldata['GPU'])) { if ($value == 0) $ret = ' '; break; } case 'GPU Clock': case 'Memory Clock': case 'GPU Voltage': case 'GPU Activity': if ($section == 'total') break; if ($value == 0) $class = $warnclass; break; case 'Fan Percent': if ($section == 'total') break; if ($value == 0) $class = $warnclass; else { if ($value == 100) $class = $errorclass; else if ($value > 85) $class = $warnclass; } break; case 'Fan Speed': if ($section == 'total') break; if ($value == 0) $class = $warnclass; else if (isset($alldata['Fan Percent'])) { $test = $alldata['Fan Percent']; if ($test == 100) $class = $errorclass; else if ($test > 85) $class = $warnclass; } break; case 'MHS av': case 'MHS 5s': case 'MHS 1m': case 'MHS 5m': case 'MHS 15m': $parts = explode('.', $value, 2); if (count($parts) == 1) $dec = ''; else $dec = '.'.$parts[1]; $ret = number_format((float)$parts[0]).$dec; if ($value == 0) $class = $errorclass; else if (isset($alldata['Difficulty Accepted']) && isset($alldata['Accepted']) && isset($alldata['Utility']) && ($alldata['Difficulty Accepted'] > 0) && ($alldata['Accepted'] > 0)) { $expected = 60 * $value * (pow(10, 6) / pow(2, 32)); if ($expected == 0) $expected = 0.000001; // 1 H/s $da = $alldata['Difficulty Accepted']; $a = $alldata['Accepted']; $expected /= ($da / $a); $ratio = $alldata['Utility'] / $expected; if ($ratio < 0.9) $class = $hiclass; else if ($ratio > 1.1) $class = $loclass; } break; case 'Total MH': case 'Getworks': case 'Works': case 'Accepted': case 'Rejected': case 'Local Work': case 'Discarded': case 'Diff1 Shares': case 'Diff1 Work': case 'Times Sent': case 'Bytes Sent': case 'Net Bytes Sent': case 'Times Recv': case 'Bytes Recv': case 'Net Bytes Recv': $parts = explode('.', $value, 2); if (count($parts) == 1) $dec = ''; else $dec = '.'.$parts[1]; $ret = number_format((float)$parts[0]).$dec; break; case 'Hs': case 'W': case 'history_time': case 'Pool Wait': case 'Pool Max': case 'Pool Min': case 'Pool Av': case 'Min Diff': case 'Max Diff': case 'Work Diff': $parts = explode('.', $value, 2); if (count($parts) == 1) $dec = ''; else $dec = '.'.endzero($parts[1]); $ret = number_format((float)$parts[0]).$dec; break; case 'Status': if ($section == 'total') break; if ($value != 'Alive') $class = $errorclass; break; case 'Enabled': if ($section == 'total') break; if ($value != 'Y') $class = $warnclass; break; case 'No Device': if ($section == 'total') break; if ($value != 'false') $class = $errorclass; break; case 'When': case 'Current Block Time': if ($section == 'total') break; $ret = date($dfmt, $value); break; case 'Current Block Version': if ($section == 'total') break; $ret = sprintf("0x%08x", $value); break; case 'Last Share Difficulty': if ($section == 'total') break; case 'Difficulty Accepted': case 'Difficulty Rejected': case 'Difficulty Stale': case 'Network Difficulty': if ($value != '') $ret = number_format((float)$value, 2); break; case 'Device Hardware%': case 'Device Rejected%': case 'Pool Rejected%': case 'Pool Stale%': if ($section == 'total') break; if ($value != '') $ret = number_format((float)$value, 2) . '%'; break; case 'Best Share': if ($section == 'total') break; case 'Hardware Errors': if ($value != '') $ret = number_format((float)$value); break; // Ava specific stats fields case 'GHSmm': case 'AVATHS': if ($value != '') $ret = number_format((float)$value, 2); if ($section != 'total') { if ($value == 0) $class = $errorclass; else { if ($name == 'GHSmm') { if ($value < $avaghsmmmin) $class = $warnclass; } else { if ($value < ($avaghsmmmin/1000.0)) $class = $warnclass; } } } break; case 'Temp': if ($section == 'total') break; $ret = $value.'°C'; if ($section == 'MM') { if ($value == 0 || $value >= $avatemphi) $class = $errorclass; else if ($value >= $avatempmed) $class = $warnclass; } break; case 'TMax': if ($section == 'total') break; $ret = $value.'°C'; if ($value == 0 || $value >= $avatmaxhi) $class = $errorclass; else if ($value >= $avatmaxmed) $class = $warnclass; break; case 'PG': if ($section == 'total') break; if ($value != '15') { if ($value > 10) $class = $warnclass; else $class = $errorclass; } $ret = $value; break; case 'ECHU': if ($section == 'total') break; $ret = $value; $chk = str_replace(array(' ','0'), '', $value); if ($chk != '') { $class = $warnclass; $vals = explode(' ', $value); $ret = ''; $sep = ''; foreach ($vals as $one) { if ($one == '0' || $one == '1') $ret .= $sep.$one; else $ret .= $sep.'x'.dechex($one); $sep = ' '; } } $ret = str_replace(' ', ' ', $ret); break; case 'Vi': case 'Vo': if ($section == 'total') break; $ret = str_replace(' ', ' ', $value); break; case 'ECMM': if ($section == 'total') break; if ($value != '0') { $class = $warnclass; $ret = 'x'.dechex($value); } else $ret = $value; break; case 'Ver': if ($section == 'total') break; $ret = str_replace('-', '‑', $value); break; // S9 specific stats fields case 'fan_num': if ($section == 'total') break; $ret = $value; if ($value < 1) $class = $warnclass; break; case 'temp2_': if ($section == 'total') break; $ret = $value.'°C'; if ($value == 0 || $value >= $s9temphi) $class = $errorclass; else if ($value >= $s9tempmed) $class = $warnclass; break; case 'chain_acn': if ($section == 'total') break; $ret = $value; if ($value != $s9acn) $class = $warnclass; break; case 'chain_rate': if ($value != '') $ret = number_format((float)$value, 2); if ($section != 'total') { if ($value == 0) $class = $errorclass; else { if ($value < $s9chainmin) $class = $warnclass; } } break; case 'total_rate': if ($value != '') $ret = number_format((float)$value, 2); if ($value == 0) $class = $errorclass; break; // BUTTON. case 'Rig': case 'Pool': case 'GPU': break; // Sample GEN fields case 'Mined': if ($value != '') $ret = number_format((float)$value * 100.0, 3) . '%'; break; case 'Acc': case 'Rej': if ($value != '') $ret = number_format((float)$value * 100.0, 2) . '%'; break; case 'GHS av': case 'GHS 5m': case 'GHS WU': case 'GHS Acc': case 'THS': case 'THS av': case 'THS 5m': case 'THS WU': case 'THS Acc': if ($value != '') $ret = number_format((float)$value, 2); break; case 'AvShr': if ($section == 'total') break; if ($value != '') $ret = number_format((float)$value, 2); if ($value == 0) $class = $warnclass; break; } } if ($section == 'NOTIFY' && substr($name, 0, 1) == '*' && $value != '0') $class = $errorclass; if ($class == '' && $section != 'POOL') $class = classlastshare($when, $alldata, $lstclass, $lstclass); if ($class == '' && $section == 'total') $class = $totclass; if ($class == '' && ($rownum % 2) == 0) $class = $c2class; if ($ret === '') $ret = $b; if ($class !== '') $class = " class=$class"; return array($ret, $class); } # global $poolcmd; $poolcmd = array( 'Switch to' => 'switchpool', 'Enable' => 'enablepool', 'Disable' => 'disablepool', 'Remove' => 'removepool' ); # function showhead($cmd, $values, $justnames = false) { global $poolcmd, $readonly; newrow(); foreach ($values as $name => $value) { if ($name == '0' or $name == '') $name = ' '; echo ""; } if ($justnames === false && $cmd == 'pools' && $readonly === false) foreach ($poolcmd as $name => $pcmd) echo ""; endrow(); } # function showdatetime() { global $dfmt; otherrow(''); } # global $singlerigsum; $singlerigsum = array( 'devs' => array('MHS av' => 1, 'MHS 5s' => 1, 'MHS 1m' => 1, 'MHS 5m' => 1, 'MHS 15m' => 1, 'Accepted' => 1, 'Rejected' => 1, 'Hardware Errors' => 1, 'Utility' => 1, 'Total MH' => 1, 'Diff1 Shares' => 1, 'Diff1 Work' => 1, 'Difficulty Accepted' => 1, 'Difficulty Rejected' => 1), 'pools' => array('Getworks' => 1, 'Accepted' => 1, 'Rejected' => 1, 'Discarded' => 1, 'Stale' => 1, 'Get Failures' => 1, 'Remote Failures' => 1, 'Diff1 Shares' => 1, 'Diff1 Work' => 1, 'Difficulty Accepted' => 1, 'Difficulty Rejected' => 1, 'Difficulty Stale' => 1), 'notify' => array('*' => 1)); # function showtotal($total, $when, $oldvalues) { global $rigtotals; list($showvalue, $class) = fmt('total', '', 'Total:', $when, null); echo "$showvalue"; $skipfirst = true; foreach ($oldvalues as $name => $value) { if ($skipfirst === true) { $skipfirst = false; continue; } if (isset($total[$name])) $newvalue = $total[$name]; else $newvalue = ''; list($showvalue, $class) = fmt('total', $name, $newvalue, $when, null); echo "$showvalue"; } } # function details($cmd, $list, $rig) { global $dfmt, $poolcmd, $readonly, $showndate; global $rownum, $rigtotals, $forcerigtotals, $singlerigsum; $when = 0; $stas = array('S' => 'Success', 'W' => 'Warning', 'I' => 'Informational', 'E' => 'Error', 'F' => 'Fatal'); newtable(); if ($showndate === false) { showdatetime(); endtable(); newtable(); $showndate = true; } if (isset($list['STATUS'])) { newrow(); echo ''; if (isset($list['STATUS']['When'])) { echo ''; $when = $list['STATUS']['When']; } $sta = $list['STATUS']['STATUS']; echo ''; echo ''; endrow(); } if ($rigtotals === true && isset($singlerigsum[$cmd])) $dototal = $singlerigsum[$cmd]; else $dototal = array(); $total = array(); $section = ''; $oldvalues = null; foreach ($list as $item => $values) { if ($item == 'STATUS') continue; $sectionname = preg_replace('/\d/', '', $item); // Handle 'devs' possibly containing >1 table if ($sectionname != $section) { if ($oldvalues != null && count($total) > 0 && ($rownum > 2 || $forcerigtotals === true)) showtotal($total, $when, $oldvalues); endtable(); newtable(); showhead($cmd, $values); $section = $sectionname; } newrow(); foreach ($values as $name => $value) { list($showvalue, $class) = fmt($section, $name, $value, $when, $values); echo "$showvalue"; if (isset($dototal[$name]) || (isset($dototal['*']) and substr($name, 0, 1) == '*')) { if (isset($total[$name])) $total[$name] += $value; else $total[$name] = $value; } } if ($cmd == 'pools' && $readonly === false) { reset($values); $pool = current($values); foreach ($poolcmd as $name => $pcmd) { list($ignore, $class) = fmt('BUTTON', 'Pool', '', $when, $values); echo ""; if ($pool === false) echo ' '; else { echo ""; } echo ''; } } endrow(); $oldvalues = $values; } if ($oldvalues != null && count($total) > 0 && ($rownum > 2 || $forcerigtotals === true)) showtotal($total, $when, $oldvalues); endtable(); } # global $devs; $devs = null; # function gpubuttons($count, $rig) { global $devs; $basic = array( 'GPU', 'Enable', 'Disable', 'Restart' ); $options = array( 'intensity' => 'Intensity', 'fan' => 'Fan Percent', 'engine' => 'GPU Clock', 'mem' => 'Memory Clock', 'vddc' => 'GPU Voltage' ); newtable(); newrow(); foreach ($basic as $head) echo ""; foreach ($options as $name => $des) echo ""; $n = 0; for ($c = 0; $c < $count; $c++) { endrow(); newrow(); foreach ($basic as $name) { list($ignore, $class) = fmt('BUTTON', 'GPU', '', 0, null); echo ""; if ($name == 'GPU') echo $c; else { echo ""; } echo ''; } foreach ($options as $name => $des) { list($ignore, $class) = fmt('BUTTON', 'GPU', '', 0, null); echo ""; if (!isset($devs["GPU$c"][$des])) echo ' '; else { $value = $devs["GPU$c"][$des]; echo ""; echo ""; $n++; } echo ''; } } endrow(); endtable(); } # function processgpus($rig) { global $error; global $warnfont, $warnoff; $gpus = api($rig, 'gpucount'); if ($error != null) otherrow(""); else { if (!isset($gpus['GPUS']['Count'])) { $rw = ''; otherrow($rw); } else { $count = $gpus['GPUS']['Count']; if ($count == 0) otherrow(''); else gpubuttons($count, $rig); } } } # function showpoolinputs($rig, $ans) { global $readonly, $poolinputs; if ($readonly === true || $poolinputs === false) return; newtable(); newrow(); $inps = array('Pool URL' => array('purl', 20), 'Worker Name' => array('pwork', 10), 'Worker Password' => array('ppass', 10)); $b = ' '; echo ""; endrow(); if (count($ans) > 1) { newrow(); echo ''; echo ""; endrow(); } endtable(); } # function process($cmds, $rig) { global $error, $devs; global $warnfont, $warnoff; $count = count($cmds); foreach ($cmds as $cmd => $des) { $process = api($rig, $cmd); if ($error != null) { otherrow(""); break; } else { details($cmd, $process, $rig); if ($cmd == 'devs') $devs = $process; if ($cmd == 'pools') showpoolinputs($rig, $process); # Not after the last one if (--$count > 0) otherrow(''); } } } # function rigname($rig, $rigname) { global $rigs, $rignames, $rigips; if (isset($rigs[$rig])) { $parts = explode(':', $rigs[$rig], 3); if (count($parts) == 3) $rigname = $parts[2]; else if ($rignames !== false) { switch ($rignames) { case 'ip': if (isset($parts[0]) && isset($rigips[$parts[0]])) { $ip = explode('.', $rigips[$parts[0]]); if (count($ip) == 4) $rigname = intval($ip[3]); } break; case 'ipx': if (isset($parts[0]) && isset($rigips[$parts[0]])) { $ip = explode('.', $rigips[$parts[0]]); if (count($ip) == 4) $rigname = intval($ip[3], 16); } break; } } } return $rigname; } # function riginput($rig, $rigname, $usebuttons) { $rigname = rigname($rig, $rigname); if ($usebuttons === true) return ""; else return "$rigname"; } # function rigbutton($rig, $rigname, $when, $row, $usebuttons) { list($value, $class) = fmt('BUTTON', 'Rig', '', $when, $row); if ($rig === '') $ri = ' '; else $ri = riginput($rig, $rigname, $usebuttons); return ""; } # function showrigs($anss, $headname, $rigname) { global $rigbuttons; $dthead = array($headname => 1, 'STATUS' => 1, 'Description' => 1, 'When' => 1, 'API' => 1, 'CGMiner' => 1); showhead('', $dthead); foreach ($anss as $rig => $ans) { if ($ans == null) continue; newrow(); $when = 0; if (isset($ans['STATUS']['When'])) $when = $ans['STATUS']['When']; foreach ($ans as $item => $row) { if ($item != 'STATUS' && $item != 'VERSION') continue; foreach ($dthead as $name => $x) { if ($item == 'STATUS' && $name == $headname) echo rigbutton($rig, $rigname.$rig, $when, null, $rigbuttons); else { if (isset($row[$name])) { list($showvalue, $class) = fmt('STATUS', $name, $row[$name], $when, null); echo "$showvalue"; } } } } endrow(); } } # function refreshbuttons() { global $ignorerefresh, $changerefresh, $autorefresh; if ($ignorerefresh == false && $changerefresh == true) { echo '    '; echo ""; echo ""; echo ""; } } # function pagebuttons($rig, $pg) { global $readonly, $rigs, $rigbuttons, $userlist, $ses; global $allowcustompages, $customsummarypages; if ($rig === null) { $prev = null; $next = null; if ($pg === null) $refresh = ''; else $refresh = "&pg=$pg"; } else { switch (count($rigs)) { case 0: case 1: $prev = null; $next = null; break; case 2: $prev = null; $next = ($rig + 1) % count($rigs); break; default: $prev = ($rig - 1) % count($rigs); $next = ($rig + 1) % count($rigs); break; } $refresh = "&rig=$rig"; } echo '"; } # function doOne($rig, $preprocess) { global $haderror, $readonly, $notify, $rigs; global $placebuttons; if ($placebuttons == 'top' || $placebuttons == 'both') pagebuttons($rig, null); if ($preprocess != null) process(array($preprocess => $preprocess), $rig); $cmds = array( 'devs' => 'device list', 'summary' => 'summary information', 'pools' => 'pool list'); if ($notify) $cmds['notify'] = 'device status'; $cmds['config'] = 'cgminer config'; process($cmds, $rig); if ($haderror == false && $readonly === false) processgpus($rig); if ($placebuttons == 'bot' || $placebuttons == 'both') pagebuttons($rig, null); } # global $sectionmap; # map sections to their api command # DEVS is a special case that will match GPU, PGA or ASC # so you can have a single table with both in it # DATE and $ect are hard coded so not in here $sectionmap = array( 'RIGS' => 'version', 'SUMMARY' => 'summary', 'POOL' => 'pools', 'DEVS' => 'devs', 'EDEVS' => 'edevs', 'GPU' => 'devs', // You would normally use DEVS 'PGA' => 'devs', // You would normally use DEVS 'ASC' => 'devs', // You would normally use DEVS 'NOTIFY' => 'notify', 'DEVDETAILS' => 'devdetails', 'STATS' => 'stats', 'ESTATS' => 'estats', 'CONFIG' => 'config', 'COIN' => 'coin', 'USBSTATS' => 'usbstats', 'MM' => 'mm'); # function joinfields($section1, $section2, $join, $results) { global $sectionmap; $name1 = $sectionmap[$section1]; $name2 = $sectionmap[$section2]; $newres = array(); // foreach rig in section1 foreach ($results[$name1] as $rig => $result) { $status = null; // foreach answer section in the rig api call foreach ($result as $name1b => $fields1b) { if ($name1b == 'STATUS') { // remember the STATUS from section1 $status = $result[$name1b]; continue; } // foreach answer section in the rig api call (for the other api command) foreach ($results[$name2][$rig] as $name2b => $fields2b) { if ($name2b == 'STATUS') continue; // If match the same field values of fields in $join $match = true; foreach ($join as $field) if ($fields1b[$field] != $fields2b[$field]) { $match = false; break; } if ($match === true) { if ($status != null) { $newres[$rig]['STATUS'] = $status; $status = null; } $subsection = $section1.'+'.$section2; $subsection .= preg_replace('/[^0-9]/', '', $name1b.$name2b); foreach ($fields1b as $nam => $val) $newres[$rig][$subsection]["$section1.$nam"] = $val; foreach ($fields2b as $nam => $val) $newres[$rig][$subsection]["$section2.$nam"] = $val; } } } } return $newres; } # function joinlr($section1, $section2, $join, $results) { global $sectionmap; $name1 = $sectionmap[$section1]; $name2 = $sectionmap[$section2]; $newres = array(); // foreach rig in section1 foreach ($results[$name1] as $rig => $result) { $status = null; // foreach answer section in the rig api call foreach ($result as $name1b => $fields1b) { if ($name1b == 'STATUS') { // remember the STATUS from section1 $status = $result[$name1b]; continue; } // Build L string to be matched // : means a string constant otherwise it's a field name $Lval = ''; foreach ($join['L'] as $field) { if (substr($field, 0, 1) == ':') $Lval .= substr($field, 1); else $Lval .= $fields1b[$field]; } // foreach answer section in the rig api call (for the other api command) foreach ($results[$name2][$rig] as $name2b => $fields2b) { if ($name2b == 'STATUS') continue; // Build R string and compare // : means a string constant otherwise it's a field name $Rval = ''; foreach ($join['R'] as $field) { if (substr($field, 0, 1) == ':') $Rval .= substr($field, 1); else $Rval .= $fields2b[$field]; } if ($Lval === $Rval) { if ($status != null) { $newres[$rig]['STATUS'] = $status; $status = null; } $subsection = $section1.'+'.$section2; $subsection .= preg_replace('/[^0-9]/', '', $name1b.$name2b); foreach ($fields1b as $nam => $val) $newres[$rig][$subsection]["$section1.$nam"] = $val; foreach ($fields2b as $nam => $val) $newres[$rig][$subsection]["$section2.$nam"] = $val; } } } } return $newres; } # function joinall($section1, $section2, $results) { global $sectionmap; $name1 = $sectionmap[$section1]; $name2 = $sectionmap[$section2]; $newres = array(); // foreach rig in section1 foreach ($results[$name1] as $rig => $result) { // foreach answer section in the rig api call foreach ($result as $name1b => $fields1b) { if ($name1b == 'STATUS') { // copy the STATUS from section1 $newres[$rig][$name1b] = $result[$name1b]; continue; } // foreach answer section in the rig api call (for the other api command) foreach ($results[$name2][$rig] as $name2b => $fields2b) { if ($name2b == 'STATUS') continue; $subsection = $section1.'+'.$section2; $subsection .= preg_replace('/[^0-9]/', '', $name1b.$name2b); foreach ($fields1b as $nam => $val) $newres[$rig][$subsection]["$section1.$nam"] = $val; foreach ($fields2b as $nam => $val) $newres[$rig][$subsection]["$section2.$nam"] = $val; } } } return $newres; } # function joinsections($sections, $results, $errors) { global $sectionmap, $ect; // GPU's don't have Name,ID fields - so create them foreach ($results as $section => $res) foreach ($res as $rig => $result) foreach ($result as $name => $fields) { $subname = preg_replace('/\d/', '', $name); if ($subname == 'GPU' and isset($result[$name]['GPU'])) { $results[$section][$rig][$name]['Name'] = 'GPU'; $results[$section][$rig][$name]['ID'] = $result[$name]['GPU']; } } foreach ($sections as $section => $fields) { $sec = preg_replace('/\d/', '', $section); if ($sec != 'DATE' && $sec != $ect && !isset($sectionmap[$sec])) { $both = explode('+', $sec, 2); if (count($both) > 1) { switch($both[0]) { case 'SUMMARY': switch($both[1]) { case 'POOL': case 'DEVS': case 'EDEVS': case 'CONFIG': case 'COIN': $sectionmap[$sec] = $sec; $results[$sec] = joinall($both[0], $both[1], $results); break; default: $errors[] = "Error: Invalid section '$section/$sec'"; break; } break; case 'DEVS': case 'EDEVS': switch($both[1]) { case 'NOTIFY': case 'DEVDETAILS': case 'USBSTATS': $join = array('Name', 'ID'); $sectionmap[$sec] = $sec; $results[$sec] = joinfields($both[0], $both[1], $join, $results); break; case 'STATS': case 'ESTATS': $join = array('L' => array('Name','ID'), 'R' => array('ID')); $sectionmap[$sec] = $sec; $results[$sec] = joinlr($both[0], $both[1], $join, $results); break; default: $errors[] = "Error: Invalid section '$section/$sec'"; break; } break; case 'POOL': switch($both[1]) { case 'STATS': $join = array('L' => array(':POOL','POOL'), 'R' => array('ID')); $sectionmap[$sec] = $sec; $results[$sec] = joinlr($both[0], $both[1], $join, $results); break; default: $errors[] = "Error: Invalid section '$section/$sec'"; break; } break; default: $errors[] = "Error: Invalid section '$section/$sec'"; break; } } else $errors[] = "Error: Invalid section '$section/$sec'"; } } return array($results, $errors); } # function secmatch($section, $field) { $sec = preg_replace('/\d/', '', $section); $fld = preg_replace('/\d/', '', $field); if ($sec == $fld) return true; # API estats returns data as STATS if ($sec == 'ESTATS' && $fld == 'STATS') return true; # API devs and edevs return the device type if (($sec == 'DEVS' || $sec == 'EDEVS') && ($fld == 'GPU' || $fld == 'PGA' || $fld == 'ASC')) return true; return false; } # function customset($showfields, $sum, $section, $rig, $isbutton, $result, $total, $cf = NULL) { global $rigbuttons; $rn = 0; foreach ($result as $sec => $row) { $secname = preg_replace('/\d/', '', $sec); if ($sec != 'total') if (!secmatch($section, $secname)) continue; newrow(); $when = 0; if (isset($result['STATUS']['When'])) $when = $result['STATUS']['When']; if ($isbutton) echo rigbutton($rig, $rig, $when, $row, $rigbuttons); else { list($ignore, $class) = fmt('total', '', '', $when, $row, $cf); echo ""; } foreach ($showfields as $name => $one) { if ($name === '#' and $sec != 'total') { $rn++; $value = $rn; if (isset($total[$name])) $total[$name]++; else $total[$name] = 1; } elseif (isset($row[$name])) { $value = $row[$name]; if (isset($sum[$section][$name])) { if (isset($total[$name])) $total[$name] += $value; else $total[$name] = $value; } } else { if ($sec == 'total' && isset($total[$name])) $value = $total[$name]; else $value = null; } if (strpos($secname, '+') === false) list($showvalue, $class) = fmt($secname, $name, $value, $when, $row, $cf); else { if ($name != '#') $parts = explode('.', $name, 2); else $parts[0] = $parts[1] = '#'; list($showvalue, $class) = fmt($parts[0], $parts[1], $value, $when, $row, $cf); } echo "$showvalue"; } endrow(); } return $total; } # function docalc($func, $data) { switch ($func) { case 'sum': $tot = 0; foreach ($data as $val) $tot += $val; return $tot; case 'avg': $tot = 0; foreach ($data as $val) $tot += $val; return ($tot / count($data)); case 'min': $ans = null; foreach ($data as $val) if ($ans === null) $ans = $val; else if ($val < $ans) $ans = $val; return $ans; case 'max': $ans = null; foreach ($data as $val) if ($ans === null) $ans = $val; else if ($val > $ans) $ans = $val; return $ans; case 'lo': $ans = null; foreach ($data as $val) if ($ans === null) $ans = $val; else if (strcasecmp($val, $ans) < 0) $ans = $val; return $ans; case 'hi': $ans = null; foreach ($data as $val) if ($ans === null) $ans = $val; else if (strcasecmp($val, $ans) > 0) $ans = $val; return $ans; case 'count': return count($data); case 'any': default: return $data[0]; } } # function docompare($row, $test) { // invalid $test data means true if (count($test) < 2) return true; if (isset($row[$test[0]])) $val = $row[$test[0]]; else $val = null; if ($test[1] == 'set') return ($val !== null); if ($val === null || count($test) < 3) return true; switch($test[1]) { case '=': return ($val == $test[2]); case '<': return ($val < $test[2]); case '<=': return ($val <= $test[2]); case '>': return ($val > $test[2]); case '>=': return ($val >= $test[2]); case 'eq': return (strcasecmp($val, $test[2]) == 0); case 'lt': return (strcasecmp($val, $test[2]) < 0); case 'le': return (strcasecmp($val, $test[2]) <= 0); case 'gt': return (strcasecmp($val, $test[2]) > 0); case 'ge': return (strcasecmp($val, $test[2]) >= 0); case 'sub': return (strcasecmp(substr($val, 0, strlen($test[2])), $test[2]) == 0); case '!sub': return (strcasecmp(substr($val, 0, strlen($test[2])), $test[2]) != 0); default: return true; } } # function processcompare($which, $ext, $section, $res) { if (isset($ext[$section][$which])) { $proc = $ext[$section][$which]; if ($proc !== null) { $res2 = array(); foreach ($res as $rig => $result) foreach ($result as $sec => $row) { $secname = preg_replace('/\d/', '', $sec); if (!secmatch($section, $secname)) $res2[$rig][$sec] = $row; else { $keep = true; foreach ($proc as $test) if (!docompare($row, $test)) { $keep = false; break; } if ($keep) $res2[$rig][$sec] = $row; } } $res = $res2; } } return $res; } # function ss($a, $b) { $la = strlen($a); $lb = strlen($b); if ($la != $lb) return $lb - $la; return strcmp($a, $b); } # # If you are developing a customsummarypage that uses BGEN or GEN, # you may want to remove the '@' in front of '@eval()' to help with debugging # The '@' removes php comments from the web log about missing fields # Since there are many forks of cgminer that break the API or do not # keep their fork up to date with current cgminer, the addition of # '@' solves the problem of generating unnecessary and excessive web logs # about the eval() function genfld($row, $calc) { uksort($row, "ss"); foreach ($row as $name => $value) if (strstr($calc, $name) !== FALSE) $calc = str_replace($name, $value, $calc); @eval("\$val = $calc;"); if (!isset($val)) return ''; else return $val; } # function dogen($ext, $wg, $gname, $section, &$res, &$fields) { $gen = $ext[$section][$wg]; foreach ($gen as $fld => $calc) $fields[] = "$gname.$fld"; foreach ($res as $rig => $result) foreach ($result as $sec => $row) { $secname = preg_replace('/\d/', '', $sec); if (secmatch($section, $secname)) foreach ($gen as $fld => $calc) { $name = "$gname.$fld"; $val = genfld($row, $calc); $res[$rig][$sec][$name] = $val; } } } # $section is the full name including digits function processext($ext, $section, $res, &$fields) { global $allowgen; $res = processcompare('where', $ext, $section, $res); // Generated fields (functions of other fields before grouping) if ($allowgen === true && isset($ext[$section]['bgen'])) dogen($ext, 'bgen', 'BGEN', $section, $res, $fields); if (isset($ext[$section]['group'])) { $grp = $ext[$section]['group']; $calc = $ext[$section]['calc']; if ($grp !== null) { $interim = array(); $res2 = array(); $cou = 0; foreach ($res as $rig => $result) foreach ($result as $sec => $row) { $secname = preg_replace('/\d/', '', $sec); if (!secmatch($section, $secname)) { // STATUS may be problematic ... if (!isset($res2[$sec])) $res2[$sec] = $row; } else { $grpkey = ''; $newrow = array(); foreach ($grp as $field) { if (isset($row[$field])) { $grpkey .= $row[$field].'.'; $newrow[$field] = $row[$field]; } else $grpkey .= '.'; } if (!isset($interim[$grpkey])) { $interim[$grpkey]['grp'] = $newrow; $interim[$grpkey]['sec'] = $secname.$cou; $cou++; } if ($calc !== null) foreach ($calc as $field => $func) { if (isset($row[$field])) { if (!isset($interim[$grpkey]['cal'][$field])) $interim[$grpkey]['cal'][$field] = array(); $interim[$grpkey]['cal'][$field][] = $row[$field]; } } } } // Build the rest of $res2 from $interim foreach ($interim as $rowkey => $row) { $key = $row['sec']; foreach ($row['grp'] as $field => $value) $res2[$key][$field] = $value; foreach ($row['cal'] as $field => $data) $res2[$key][$field] = docalc($calc[$field], $data); } $res = array('' => $res2); } } // Generated fields (functions of other fields after grouping) if ($allowgen === true && isset($ext[$section]['gen'])) dogen($ext, 'gen', 'GEN', $section, $res, $fields); return processcompare('having', $ext, $section, $res); } # Avalon Error values in ECMM and ECHU function showect() { $ecv = array( 'x00001' => 'Idle W', 'x00002' => 'MMCRCFailed W', 'x00004' => 'NoFan F', 'x00008' => 'Lock W', 'x00010' => 'APIfifoOverflow W', 'x00020' => 'RBOverflow W', 'x00040' => 'TooHot F', 'x00080' => 'HotBefore W', 'x00100' => 'LoopFailed F', 'x00200' => 'CoreTestFailed W', 'x00400' => 'InvalidPMU F', 'x00800' => 'PGFailed F', 'x01000' => 'NTCErr F', 'x02000' => 'VolErr F', 'x04000' => 'VCoreERR F', 'x08000' => 'PMUCRCFailed W', 'x10000' => 'InvalidPLLValue W', 'x20000' => 'HUFailed W'); otherrow(""); $count = 0; foreach ($ecv as $val => $name) { if (($count % 9) == 0) { if ($count > 0) { endrow(); } newrow(); } switch (substr($name, -2)) { case ' W': $name .= 'arning'; break; case ' F': $name .= 'atal'; break; } echo ""; $count++; } endrow(); } # function processcustompage($pagename, $sections, $sum, $ext, $namemap) { global $sectionmap, $ect; global $miner, $port; global $rigs, $error; global $warnfont, $warnoff; global $dfmt; global $readonly, $showndate; $cmds = array(); $errors = array(); foreach ($sections as $section => $fields) { $all = explode('+', $section); foreach ($all as $section) { $sec = preg_replace('/\d/', '', $section); if (isset($sectionmap[$sec])) { $cmd = $sectionmap[$sec]; if (!isset($cmds[$cmd])) $cmds[$cmd] = 1; } else if ($sec != 'DATE' && $sec != $ect) $errors[] = "Error: unknown section '$section/$sec' in custom summary page '$pagename'"; } } $results = array(); foreach ($rigs as $num => $rig) { $parts = explode(':', $rig, 3); if (count($parts) >= 1) { $miner = $parts[0]; if (count($parts) >= 2) $port = $parts[1]; else $port = ''; if (count($parts) > 2) $name = $parts[2]; else $name = $rig; foreach ($cmds as $cmd => $one) { $process = api($name, $cmd); if ($error != null) { $errors[] = "Error getting $cmd for $name $warnfont$error$warnoff"; break; } else $results[$cmd][$num] = $process; } } else otherrow(''); } // Show API errors at the top if (count($errors) > 0) { foreach ($errors as $err) otherrow(""); $errors = array(); } $shownsomething = false; if (count($results) > 0) { list($results, $errors) = joinsections($sections, $results, $errors); $first = true; foreach ($sections as $section => $fields) { $sec = preg_replace('/\d/', '', $section); if ($sec === 'DATE') { if ($shownsomething) otherrow(''); newtable(); showdatetime(); endtable(); // On top of the next table $shownsomething = false; continue; } if ($sec === $ect) { newtable(); showect(); endtable(); // On top of the next table $shownsomething = false; continue; } if ($sec === 'RIGS') { if ($shownsomething) otherrow(''); newtable(); showrigs($results['version'], 'Rig', ''); endtable(); $shownsomething = true; continue; } if (isset($results[$sectionmap[$sec]])) { // use the full section name if (isset($ext[$section]['fmt'])) $cf = $ext[$section]['fmt']; else $cf = NULL; $rigresults = processext($ext, $section, $results[$sectionmap[$sec]], $fields); $showfields = array(); $showhead = array(); foreach ($fields as $field) foreach ($rigresults as $result) foreach ($result as $secn => $row) { $secname = preg_replace('/\d/', '', $secn); if (secmatch($section, $secname)) { if ($field === '*') { foreach ($row as $f => $v) { $showfields[$f] = 1; $map = $section.'.'.$f; if (isset($namemap[$map])) $showhead[$namemap[$map]] = 1; else $showhead[$f] = 1; } } elseif ($field === '#') { $showfields[$field] = 1; $showhead[$field] = 1; } elseif (isset($row[$field])) { $showfields[$field] = 1; $map = $section.'.'.$field; if (isset($namemap[$map])) $showhead[$namemap[$map]] = 1; else $showhead[$field] = 1; } } } if (count($showfields) > 0) { if ($shownsomething) otherrow(''); newtable(); if (count($rigresults) == 1 && isset($rigresults[''])) $ri = array('' => 1) + $showhead; else $ri = array('Rig' => 1) + $showhead; showhead('', $ri, true); $total = array(); $add = array('total' => array()); foreach ($rigresults as $num => $result) $total = customset($showfields, $sum, $section, $num, true, $result, $total, $cf); if (count($total) > 0) customset($showfields, $sum, $section, 'Σ', false, $add, $total, $cf); $first = false; endtable(); $shownsomething = true; } } } } if (count($errors) > 0) { if (count($results) > 0) otherrow(''); foreach ($errors as $err) otherrow(""); } } # function showcustompage($pagename, $systempage = false) { global $customsummarypages; global $placebuttons; if ($placebuttons == 'top' || $placebuttons == 'both') pagebuttons(null, $pagename); if ($systempage === false && !isset($customsummarypages[$pagename])) { otherrow(""); return; } $csp = getcsp($pagename, $systempage); if ($csp === false) { otherrow(""); return; } degen($csp); $page = $csp[0]; $namemap = array(); foreach ($page as $name => $fields) { if ($fields === null) $page[$name] = array(); else foreach ($fields as $num => $field) { $pos = strpos($field, '='); if ($pos !== false) { $names = explode('=', $field, 2); if (strlen($names[1]) > 0) $namemap[$name.'.'.$names[0]] = $names[1]; $page[$name][$num] = $names[0]; } } } $ext = null; if (isset($csp[2])) $ext = $csp[2]; $sum = $csp[1]; if ($sum === null) $sum = array(); // convert them to searchable via isset() foreach ($sum as $section => $fields) { $newfields = array(); foreach ($fields as $field) $newfields[$field] = 1; $sum[$section] = $newfields; } if (count($page) <= 1) { otherrow(""); return; } processcustompage($pagename, $page, $sum, $ext, $namemap); if ($placebuttons == 'bot' || $placebuttons == 'both') pagebuttons(null, $pagename); } # function onlylogin() { global $here; htmlhead('', false, null, null, true); ?> No rigs $action"); return; } else { if ($mcast === true && count($rigs) < $mcastexpect) $mcerr = othrow('"); } if ($ignorerefresh == false) { $ref = trim(getparam('ref', true)); if ($ref != null && $ref != '') $autorefresh = intval($ref); } if ($pagesonly !== true) { $rig = trim(getparam('rig', true)); $arg = trim(getparam('arg', true)); $preprocess = null; if ($arg != null and $arg != '') { if ($rig != null and $rig != '' and $rig >= 0 and $rig < count($rigs)) { $parts = explode(':', $rigs[$rig], 3); if (count($parts) >= 1) { $miner = $parts[0]; if (count($parts) >= 2) $port = $parts[1]; else $port = ''; if ($readonly !== true) $preprocess = $arg; } } } } if ($allowcustompages === true) { $pg = urlencode(trim(getparam('pg', true))); if ($pagesonly === true) { if ($pg !== null && $pg !== '') { if ($userlist !== null && isset($userlist['def']) && !in_array($pg, $userlist['def'])) $pg = null; } else { if ($userlist !== null && isset($userlist['def'])) foreach ($userlist['def'] as $pglook) if (getcsp($pglook) !== false) { $pg = $pglook; break; } } } if ($pg !== null && $pg !== '') { htmlhead($mcerr, false, null, $pg); showcustompage($pg); return; } } if ($pagesonly === true) { onlylogin(); return; } if (count($rigs) == 1) { $parts = explode(':', $rigs[0], 3); if (count($parts) >= 1) { $miner = $parts[0]; if (count($parts) >= 2) $port = $parts[1]; else $port = ''; htmlhead($mcerr, true, 0); doOne(0, $preprocess); } else { minhead($mcerr); otherrow(''); } return; } if ($rig != null and $rig != '' and $rig >= 0 and $rig < count($rigs)) { $parts = explode(':', $rigs[$rig], 3); if (count($parts) >= 1) { $miner = $parts[0]; if (count($parts) >= 2) $port = $parts[1]; else $port = ''; htmlhead($mcerr, true, 0); doOne($rig, $preprocess); } else { minhead($mcerr); otherrow(''); } return; } htmlhead($mcerr, false, null); if ($preprocess != null) process(array($preprocess => $preprocess), $rig); if (getcsp('Summary', true) !== false) showcustompage('Summary', true); } # if ($mcast === true) getrigs(); display(); # ?>
$name$nameDate: '.date($dfmt).'Computer: '.$list['STATUS']['Description'].'When: '.date($dfmt, $list['STATUS']['When']).'Status: '.$stas[$sta].'Message: '.$list['STATUS']['Msg'].'$head$desError getting GPU count: $warnfont$error$warnoffNo GPU count returned: '.$warnfont; $rw .= $gpus['STATUS']['STATUS'].' '.$gpus['STATUS']['Msg']; $rw .= $warnoff.'No GPUs Add a pool: "; foreach ($inps as $text => $name) echo "$text: "; echo " Set pool priorities: Comma list of pool numbers: "; echo "Error getting $des: $warnfont$error$warnoff

$ri
'; if ($userlist === null || isset($_SESSION[$ses])) { if ($prev !== null) echo riginput($prev, 'Prev', true).' '; echo " "; if ($next !== null) echo riginput($next, 'Next', true).' '; echo ' '; if (count($rigs) > 1 and getcsp('Summary', true) !== false) echo " "; } if ($allowcustompages === true) { if ($userlist === null || isset($_SESSION[$ses])) $list = $customsummarypages; else { if ($userlist !== null && isset($userlist['def'])) $list = array_flip($userlist['def']); else $list = array(); } foreach ($list as $pagename => $data) if (getcsp($pagename) !== false) echo " "; } echo ' '; if ($rig !== null && $readonly === false) { $rg = ''; if (count($rigs) > 1) $rg = " Rig $rig"; echo ""; echo " "; } refreshbuttons(); if (isset($_SESSION[$ses])) echo " "; else if ($userlist !== null) echo " "; echo "
$rigECHU and ECMM error codes (mouse over) $val Bad "$rigs" array$err    $errUnknown custom summary page '$pagename'Invalid custom summary page '$pagename'Invalid custom summary page '$pagename' no content
 
 

LOGIN

Username:
Password:
Found '.count($rigs)." rigs but expected at least $mcastexpectInvalid "$rigs" arrayInvalid "$rigs" array