### DietPI for MangoPi-MQuad (H616)

#### Building processus :

Use Armbian image : https://mega.nz/file/XeoymJKA#VSJHsyU8SCQPAQvMqVkiqLVPXWFp4egxajoL4Ea0jqI

*It's a debian bullseye minimal linux 5.16.17*

burn image and connect the MangoPi with ssh:

user : **root**

password : **orangepi**

then :

```
apt-get update && apt-get upgrade -y
apt install -y curl ca-certificates systemd-sysv git build-essential
reboot
```

#### If you wants I2C or SPI enabled (you can do this later in dietpi):

```
nano /boot/orangepiEnv.txt
```

and add these lines :
```
param_spidev_spi_bus=1
overlays=i2c0
```

Save and reboot

#### Now build Dietpi:

```
bash -c "$(curl -sSfL 'https://raw.githubusercontent.com/MichaIng/DietPi/master/.build/images/dietpi-installer')"
```

img1
img2
img3
img4
img5
img6
img7

At this step you can:
-remove the card to make backup/clone
-reboot to use the DiePi imgae


after reboot password will be: 

user : **root**

password : **dietpi**